The uart pdata array is already terminated by a zero flag field. This patch reuses this terminator and eliminates DAVINCI_MAX_NR_UARTS definition. This way, future platforms can have different number of uarts initialized via davinci_serial_init().
Signed-off-by: Cyril Chemparathy <[email protected]> --- arch/arm/mach-davinci/include/mach/serial.h | 1 - arch/arm/mach-davinci/serial.c | 2 +- 2 files changed, 1 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index a584697..f6c4f34 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -13,7 +13,6 @@ #include <mach/hardware.h> -#define DAVINCI_MAX_NR_UARTS 3 #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) #define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 7ce5ba0..709e1a9 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -77,7 +77,7 @@ int __init davinci_serial_init(struct davinci_uart_config *info) * Make sure the serial ports are muxed on at this point. * You have to mux them off in device drivers later on if not needed. */ - for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++, p++) { + for (i = 0; p->flags; i++, p++) { if (!(info->enabled_uarts & (1 << i))) continue; -- 1.7.0.4 _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
