Jayakrishnan, The McASP transmit bit clock, ACLKX can be either externally sourced or internally generated.
In case ALCLKX is internally generated from AUXCLK, then you have the option of sending the intermediate high frequency master clock (AHCLKX) to the AHCLKX pin to be used by other devices in the system. In such a situation you don't need to use the 2nd McASP just for generating AHCLKX. However, if your use-case needs two McASPs that can also be done as both can be used simultaneously. Regards, Vaibhav -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jaya krishnan Sent: Tuesday, May 04, 2010 1:44 PM To: [email protected] Subject: DM6467 McASP Hi , I want to use McASP port 0 for transmit data and port 1 to generate high frequency clock (AHCLKX) (to be used as master clock for another audio DAC in the system.) Is there any limitation to use both ports simultaneously?Pls reply Regards JK Jayakrishnan M M Research Engineer R&D Team-2 , Group-5 Security Solutions Division SAMSUNG TECHWIN CO.,LTD TEL +82-70-7147-8482 FAX +82-31-8018-3712 Mobile +82-10-6409-3619 E-mail:[email protected] _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
