Swami, Thanks, what I want is just narrow down some hardware issue. So need to change code or configuration to force high speed to full speed. Already try with bridging with a USB1.1 HUB, need some other method to verify.
Do you know any method for that? Thanks Ivan ________________________________ From: Subbrathnam, Swaminathan [mailto:[email protected]] Sent: 2010年5月14日 18:27 To: Jiang Ivan-A21617; [email protected] Subject: RE: how to configure the USB0 as full speed on OMAP L138? Ivan, High Speed device is backward compatible to full speed operation so no need to configure the device in full speed mode. If you connect to a full speed port the device will automatically enumerate as a full speed device. Regards swami ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Jiang Ivan-A21617 Sent: Friday, May 14, 2010 3:50 PM To: [email protected] Subject: how to configure the USB0 as full speed on OMAP L138? Hi, Any one know how to configure the USB0(dual-mode, USB 2.0 ) to full speed? Default, this device will function as high speed. I configure USB0 as GADGET_MUSB currently. Thanks JP
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
