Hi Kevin, [...] >> In addition to being embedded into the EMAC controller, the CPDMA hardware >> block is used in TI's CPSW switch controller. Fortunately, the programming >> interface to this hardware block remains somewhat consistent across these >> devices. >> >> This series contains a new reusable cpdma implementation, as well as >> corresponding changes to plug unto the current emac driver. >> >> This code has been very briefly tested on DM365. Performance and stability >> tests have not yet been run. Further, this code does not handle >> transmit/receive errors properly. In short, this code is still pretty raw, >> and is being posted here for some early feedback on the overall approach. > > I presume driver for the TI CPSW switch controler also going to live under > drivers/net, right?
Correct. > If so, the approach looks OK to me, but everything under drivers/net needs > review on the netdev list and will merge via the net-2.6 tree. Understood. The RFC posts were strictly for early feedback. Once I stabilize this code (incl. CPSW), I will repost on netdev and davinci MLs. Thanks Cyril. _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
