Hi,
Has anybody done ddr2(MT47H128M16HG-3E) turning in UBL code .
The following entries are not working ...
static const Uint8 DDR_NM = 0;//?
static const Uint8 DDR_CL = 5;
static const Uint8 DDR_IBANK = 3;
static const Uint8 DDR_PAGESIZE = 2;
static const Uint8 DDR_T_RFC = 75
static const Uint8 DDR_T_RP = 8;
static const Uint8 DDR_T_RCD = 15 ;
static const Uint8 DDR_T_WR = 15;;
static const Uint8 DDR_T_RAS = 45;
static const Uint8 DDR_T_RC = 55;
static const Uint8 DDR_T_RRD = 10;
static const Uint8 DDR_T_WTR = 8;
static const Uint8 DDR_T_RASMAX = 200;
static const Uint8 DDR_T_XP = 2;
static const Uint8 DDR_T_XSNR = 85;
static const Uint8 DDR_T_XSRD = 0xc7;
static const Uint8 DDR_T_RTP = 8;
static const Uint8 DDR_T_CKE = 3;
static const Uint16 DDR_RR = 0xc57;
static const Uint8 DDR_READ_Latency = 7;
Thanks & Regards,
Raghu Ramaraj
________________________________
http://www.mindtree.com/email/disclaimer.html
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
