I am getting started with UBI/UBIFS on DM355, things go quite wrong if I use the default options to ubiattach; I have to use the -O 2048 option to force the location of some metadata to a page offset (on 2K page SLC NAND).
I can live with this, but - aiui I lose 4KB to UBI metadata per 128K eraseblock, instead of 2K - something is clearly wrong somewhere and should be fixed, either the default 512-byte offset it is trying to use should work, or it should be detecting that it must use the 2048-byte offset. I found this which looks similar, from Caglar Akyuz: http://patchwork.ozlabs.org/patch/50601/ Anyone run into this and know the issues? Any clues welcome. -- Jon Povey [email protected] Racelogic is a limited company registered in England. Registered number 2743719 . Registered Office Unit 10, Swan Business Centre, Osier Way, Buckingham, Bucks, MK18 1TB . The information contained in this electronic mail transmission is intended by Racelogic Ltd for the use of the named individual or entity to which it is directed and may contain information that is confidential or privileged. If you have received this electronic mail transmission in error, please delete it from your system without copying or forwarding it, and notify the sender of the error by reply email so that the sender's address records can be corrected. The views expressed by the sender of this communication do not necessarily represent those of Racelogic Ltd. Please note that Racelogic reserves the right to monitor e-mail communications passing through its network _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
