Cyril Chemparathy <[email protected]> writes: > Texas Instruments' TNETV107X is an ARM1176 based SoC, with on-chip > touchscreen and keypad controllers. This patch series adds drivers for these > controllers.
Dmitry, With you're review/ack, I can merge these via the davinci tree so the drivers can merge with the platform code that goes with them. That way we can avoid potential conflicts from other davinci changes touching the same platform files. Kevin > > Cyril Chemparathy (7): > davinci: define tnetv107x keypad platform data > input: add driver for tnetv107x on-chip keypad controller > davinci: add tnetv107x keypad platform device > davinci: add keypad config for tnetv107x evm board > input: add driver for tnetv107x touchscreen controller > davinci: add tnetv107x touchscreen platform device > davinci: add touchscreen config for tnetv107x evm board > > arch/arm/mach-davinci/board-tnetv107x-evm.c | 51 +++ > arch/arm/mach-davinci/devices-tnetv107x.c | 54 +++ > arch/arm/mach-davinci/include/mach/tnetv107x.h | 24 ++ > drivers/input/keyboard/Kconfig | 9 + > drivers/input/keyboard/Makefile | 1 + > drivers/input/keyboard/tnetv107x-keypad.c | 324 ++++++++++++++++ > drivers/input/touchscreen/Kconfig | 6 + > drivers/input/touchscreen/Makefile | 1 + > drivers/input/touchscreen/tnetv107x-ts.c | 481 > ++++++++++++++++++++++++ > 9 files changed, 951 insertions(+), 0 deletions(-) > create mode 100644 drivers/input/keyboard/tnetv107x-keypad.c > create mode 100644 drivers/input/touchscreen/tnetv107x-ts.c > > _______________________________________________ > Davinci-linux-open-source mailing list > [email protected] > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
