Cyril Chemparathy <[email protected]> writes: > Texas Instruments' TNETV107X is an ARM1176 based SoC, with on-chip > touchscreen and keypad controllers. This patch series adds drivers for these > controllers. > > Changes between v1 and v2: > 1. Cleaned up platform data needs by reusing matrix keypad pdata > 2. Eliminated calibration code from touch driver > 3. Relocated h/w init code to open and close > 4. Other minor cleanups > > Changes between v2 and v3: > 1. Merged keycodes alloc into keypad data > 2. Moved irq hookup to probe from open > 3. Other minor cleanups > > Changes between v3 and v4: > 1. Locking between hardirqs for keypad driver > > Cyril Chemparathy (5): > input: add driver for tnetv107x on-chip keypad controller > davinci: add tnetv107x keypad platform device > davinci: add keypad config for tnetv107x evm board > input: add driver for tnetv107x touchscreen controller > davinci: add tnetv107x touchscreen platform device
Thanks, queuing this series for 2.6.37 in davinci-next. Kevin > arch/arm/mach-davinci/board-tnetv107x-evm.c | 56 ++++ > arch/arm/mach-davinci/devices-tnetv107x.c | 50 +++ > arch/arm/mach-davinci/include/mach/tnetv107x.h | 3 + > drivers/input/keyboard/Kconfig | 9 + > drivers/input/keyboard/Makefile | 1 + > drivers/input/keyboard/tnetv107x-keypad.c | 340 ++++++++++++++++++++ > drivers/input/touchscreen/Kconfig | 9 + > drivers/input/touchscreen/Makefile | 1 + > drivers/input/touchscreen/tnetv107x-ts.c | 396 > ++++++++++++++++++++++++ > 9 files changed, 865 insertions(+), 0 deletions(-) > create mode 100644 drivers/input/keyboard/tnetv107x-keypad.c > create mode 100644 drivers/input/touchscreen/tnetv107x-ts.c _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
