From: Sekhar Nori <[email protected]> Setup the NAND flash timings for DA850 EVM
Before configuring the timing values, throughput calculation using dd command yielded 469 kB/s write and 966 kB/s read speed. After the timing configuration, the throughput was measured to be 2.4 MB/s write and 5 MB/s read. [Mukul Bhatnagar: actual calculation of timing values from the NAND datasheet] Signed-off-by: Sekhar Nori <[email protected]> Cc: Mukul Bhatnagar <[email protected]> Acked-by: Kevin Hilman <[email protected]> Signed-off-by: Kevin Hilman <[email protected]> --- arch/arm/mach-davinci/board-da850-evm.c | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 190ebd3..c1d45d7 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -36,6 +36,7 @@ #include <mach/da8xx.h> #include <mach/nand.h> #include <mach/mux.h> +#include <mach/aemif.h> #define DA850_EVM_PHY_MASK 0x1 #define DA850_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ @@ -143,12 +144,23 @@ static struct mtd_partition da850_evm_nandflash_partition[] = { }, }; +static struct davinci_aemif_timing da850_evm_nandflash_timing = { + .wsetup = 24, + .wstrobe = 21, + .whold = 14, + .rsetup = 19, + .rstrobe = 50, + .rhold = 0, + .ta = 20, +}; + static struct davinci_nand_pdata da850_evm_nandflash_data = { .parts = da850_evm_nandflash_partition, .nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition), .ecc_mode = NAND_ECC_HW, .ecc_bits = 4, .options = NAND_USE_FLASH_BBT, + .timing = &da850_evm_nandflash_timing, }; static struct resource da850_evm_nandflash_resource[] = { -- 1.7.2.1 _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
