On Thu, Oct 28, 2010 at 19:34:10, Nori, Sekhar wrote: > Hi Victor, > > Sorry for jumping late on this. Some comments below: > > On Tue, Oct 19, 2010 at 23:36:19, vm.ro...@gmail.com wrote: > > From: Victor Rodriguez <victor.rodrig...@sasken.com> > > > > This patch adds EMAC support for the Hawkboard-L138 system > > > > Signed-off-by: Victor Rodriguez <victor.rodrig...@sasken.com> > > --- > > arch/arm/mach-davinci/board-omapl138-hawk.c | 47 > > +++++++++++++++++++++++++++ > > 1 files changed, 47 insertions(+), 0 deletions(-) > > > > diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c > > b/arch/arm/mach-davinci/board-omapl138-hawk.c > > index c472dd8..8633245 100644 > > --- a/arch/arm/mach-davinci/board-omapl138-hawk.c > > +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c > > @@ -19,6 +19,51 @@ > > > > #include <mach/cp_intc.h> > > #include <mach/da8xx.h> > > +#include <mach/mux.h> > > + > > +#define HAWKBOARD_PHY_ID "0:07" > > + > > +static short omapl138_hawk_mii_pins[] __initdata = { > > + DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, > > + DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, > > + DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3, > > + DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK, > > + DA850_MDIO_D, > > + -1 > > -1 need not be a new line. In any case, please include a ',' after it.
The justification for a ',' in the end is that it makes it easier to add new initialization elements. Since -1 is going to be the last one anyway, please ignore this comment. Thanks, Sekhar _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source