When the RMII PHY on the UI board is enabled with CONFIG_DA850_UI_RMII then then following will be printed to the console when warnings are also enabled:
WARNING: at drivers/gpio/gpiolib.c:1567 __gpio_set_value+0x4c/0x5c() Modules linked in: [<c002c6ac>] (unwind_backtrace+0x0/0xf8) from [<c003b48c>] (warn_slowpath_common+0x4c/0x64) [<c003b48c>] (warn_slowpath_common+0x4c/0x64) from [<c003b4c0>] (warn_slowpath_null+0x1c/0x24) [<c003b4c0>] (warn_slowpath_null+0x1c/0x24) from [<c01aed60>] (__gpio_set_value+0x4c/0x5c) [<c01aed60>] (__gpio_set_value+0x4c/0x5c) from [<c0033bd4>] (da850_evm_ui_expander_setup+0x1e4/0x2 44) [<c0033bd4>] (da850_evm_ui_expander_setup+0x1e4/0x244) from [<c02e2e1c>] (pca953x_probe+0x1f8/0x29 0) <snip> Traced the WARN_ON to the gpio_set_value(rmii_sel,0) call in da850_evm_setup_emac_rmii. Replacing the call with the _cansleep variant results in no more warning. Signed-off-by: Ben Gardiner <[email protected]> Reviewed-by: Chris Cordahi <[email protected]> --- arch/arm/mach-davinci/board-da850-evm.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index c6e11c6..e8e54ff 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -266,7 +266,7 @@ static inline void da850_evm_setup_emac_rmii(int rmii_sel) struct davinci_soc_info *soc_info = &davinci_soc_info; soc_info->emac_pdata->rmii_en = 1; - gpio_set_value(rmii_sel, 0); + gpio_set_value_cansleep(rmii_sel, 0); } #else static inline void da850_evm_setup_emac_rmii(int rmii_sel) { } -- 1.7.0.4 _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
