Hi Sergei, On Thu, Nov 18, 2010 at 16:52:12, Sergei Shtylyov wrote: > Hello. > > On 12-11-2010 11:01, Savinay Dharmappa wrote: > > > From: David Griego <[email protected]> > > > OMAP-L137/AM17x has limited number of dedicated EMIFA > > address pins, enough to interface directly to an SDRAM. > > If a device such as an asynchronous flash needs to be > > attached to the EMIFA, then either GPIO pins or a chip > > select may be used to control the flash device's upper > > address lines. > > > > This patch adds support for the NOR flash on the OMAP-L137/ > > AM17x user interface daughter board using the latch-addr-flash > > MTD mapping driver which allows flashes to be partially > > physically addressed. The upper address lines are set by > > a board specific code which is a separate patch. > > Please add back my signoff, omitted in this version. Some of the code,
> including a bug fix, was authored by me. > I'll surely do this. What about your Sign-off on 2/2 patch? Also shall I add Aleksey's Sign-off on this patch and David's Sign-off on 2/2 patch? Thanks, Savinay. _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
