Hello.
On 20-12-2010 16:54, Manjunath Hadli wrote:
This patch implements the overall device creation for the Video
display driver
Signed-off-by: Manjunath Hadli<[email protected]>
Acked-by: Muralidharan Karicheri<[email protected]>
Acked-by: Hans Verkuil<[email protected]>
[...]
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 5e5b0a7..e8b8e94 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -640,6 +640,142 @@ void dm644x_set_vpfe_config(struct vpfe_config *cfg)
vpfe_capture_dev.dev.platform_data = cfg;
}
+static struct resource dm644x_osd_resources[] = {
+ {
+ .start = 0x01C72600,
+ .end = 0x01C72600 + 0x200,
^^^^^^
Rather 0x1ff? Else it looks like off-by-one error.
+ .flags = IORESOURCE_MEM,
+ },
+};
[...]
+static struct resource dm644x_venc_resources[] = {
+ /* venc registers io space */
+ {
+ .start = 0x01C72400,
+ .end = 0x01C72400 + 0x180,
Same here...
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static u64 dm644x_venc_dma_mask = DMA_BIT_MASK(32);
+
+#define VPSS_CLKCTL 0x01C40044
Empty line here, please.
+static void __iomem *vpss_clkctl_reg;
+
+/* TBD. Check what VENC_CLOCK_SEL settings for HDTV and EDTV */
+static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type, __u64 mode)
+{
+ int ret = 0;
+
+ if (NULL == vpss_clkctl_reg)
+ return -EINVAL;
+ if (type == VPBE_ENC_STD) {
*switch* would look more natural here.
+ __raw_writel(0x18, vpss_clkctl_reg);
+ } else if (type == VPBE_ENC_DV_PRESET) {
+ switch ((unsigned int)mode) {
+ case V4L2_DV_480P59_94:
+ case V4L2_DV_576P50:
+ __raw_writel(0x19, vpss_clkctl_reg);
+ break;
+ case V4L2_DV_720P60:
+ case V4L2_DV_1080I60:
+ case V4L2_DV_1080P30:
+ /*
+ * For HD, use external clock source since HD requires higher
+ * clock rate
+ */
Please indent the comment properly. And the preferred style is this:
/*
* For HD, use external clock source since HD
* requires higher clock rate
*/
+ __raw_writel(0xa, vpss_clkctl_reg);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ } else
+ ret = -EINVAL;
+
+ return ret;
+}
+
+
One empty line too many?
+static inline u32 dm644x_reg_modify(void *reg, u32 val, u32 mask)
+{
+ u32 new_val = (__raw_readl(reg) & ~mask) | (val & mask);
+ __raw_writel(new_val, reg);
+ return new_val;
+}
+
+static u64 vpbe_display_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource dm644x_v4l2_disp_resources[] = {
+ {
+ .start = IRQ_VENCINT,
+ .end = IRQ_VENCINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = 0x01C72400,
Haven't you already declared resources with the same base address?
+ .end = 0x01C72400 + 0x180,
^^^^^ 0x17f?
+ .flags = IORESOURCE_MEM,
+ },
+
+};
Empty line wouldn't hurt here...
+static struct platform_device dm644x_venc_dev = {
+ .name = VPBE_VENC_SUBDEV_NAME,
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm644x_venc_resources),
+ .resource = dm644x_venc_resources,
+ .dev = {
+ .dma_mask =&dm644x_venc_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = (void *)&dm644x_venc_pdata,
There's no need to cast to 'void *' explicitly.
@@ -767,20 +903,36 @@ void __init dm644x_init(void)
[...]
+static int __init dm644x_init_video(void)
+{
+ /* Add ccdc clock aliases */
+ clk_add_alias("master", dm644x_ccdc_dev.name, "vpss_master", NULL);
+ clk_add_alias("slave", dm644x_ccdc_dev.name, "vpss_slave", NULL);
+ vpss_clkctl_reg = ioremap_nocache(VPSS_CLKCTL, 4);
ioremap_nocache() can fail -- you should check the result.
WBR, Sergei
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
