Hello. Michael Williamson wrote:
From: Sudhakar Rajashekhara<[email protected]>
The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. In addition, the variant code for the AM-1808 SoC appears to match the Rev-2.0 code for the OMAP-L138. Add an additional entry to support these chips.
This patch is orignally from a patch on the arago project, here: http://arago-project.org/git/projects/?p=linux-omapl1.git;a=commit;h=6157618435e313a444cdf059702bd34036a6e2b7 Further information related to the need for this patch can be located at http://e2e.ti.com/support/embedded/f/354/p/67290/248486.aspx http://linux.davincidsp.com/pipermail/davinci-linux-open-source/2010-November/021224.html
This patch was tested using an AM-1808 SoC on a MityARM-1808 SoM card. It was also tested using a Rev 1.0 silicon OMAP-L138 on a MityDSP-L138F card.
Signed-off-by: Michael Williamson <[email protected]> Tested-by: Michael Williamson <[email protected]> Reported-by: Nicolas Luna <[email protected]>
I saw that the original patch was signed off by Sudhakar -- why you omitted that?
Ignorance, mostly...
That patch was for the Arago project, and not the mainline, and I wasn't sure if I could add a sign-off with express instruction from Sudhakar. Wasn't trying to slight anyone...
I will add Sudhakar's sign-off, assuming that is OK with Sudhakar.
Should I remove my sign-off?
No.
Thanks for the help.
-Mike
WBR, Sergei _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
