Hi On Fri, Jan 21, 2011 at 1:16 AM, GiriPrasad DeviPrasad <[email protected]> wrote: > > I am creating ram disk as in : > http://processors.wiki.ti.com/index.php/Creating_a_Root_File_System_for_Linux_on_OMAP35x > > I compiled the linux-omap kernel using > (http://hawkboard.googlecode.com/files/linux-omapl1_ver1.tar.bz2), with the > kernel parameters as described in the first link as above: > make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- uImage_v2
I have never used that one , but you can use the one from Davinci tree. you have to complie it with the da8xx_omapl_defconfig > cp arch/arm/boot/Image_v2 /tftpboot/uImage_v2 > > Then I did: > setenv bootargs mem=88M ip=dhcp console=ttyS0,115200n8 root=/dev/ram0 rw > initrd=0xc1180000,16M ramdisk_size=16384 > saveenv > tftp c0000000 uImage_v2 Why this address ?? I used this $tftp c0700000 uImage_v1 $tftp c1180000 ramdisk_v1.gz Regards VIctor Rodriguez > tftp c1180000 rd-ext2.bin > bootm c0000000 > > It errors: > hawkboard.org > bootm c0000000 > AIS U-BootLoader is already flashed > Wrong Image Format for bootm command > ERROR: can't get kernel image! > > any clues why? > This from http://elinux.org/Hawkboard works fine, though, with the default > ram disk on hawkboard.org: > http://hawkboard.googlecode.com/files/linux-omapl1_ver1.tar.bz2 > > make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- distclean > make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- > omapl138_hawkboard_defconfig > > make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- uImage > > Regards, > D.Giriprasad > > _______________________________________________ > Davinci-linux-open-source mailing list > [email protected] > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
