Hello.
On 01-02-2011 3:05, Michael Williamson wrote:
From: Sekhar Nori<[email protected]>
This patch adds the on-board SPI flash device to the
DA830/OMAP-L137/AM17x EVM. It also registers the SPI flash
device to the MTD subsystem.
Based on SPI flash device support for MityDSP-L138F platform.
Signed-off-by: Michael Williamson<[email protected]>
Why Sekhar hasn't signed off on this patch?
diff --git a/arch/arm/mach-davinci/board-da830-evm.c
b/arch/arm/mach-davinci/board-da830-evm.c
index b52a3a1..15077a0 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
[...]
@@ -534,6 +537,83 @@ static struct edma_rsv_info da830_edma_rsv[] = {
},
};
+static struct davinci_spi_platform_data da830evm_spi0_pdata = {
+ .version = SPI_VERSION_2,
+ .num_chipselect = 1,
+ .intr_line = 1,
+};
+
+static struct mtd_partition da830evm_spiflash_part[] = {
+ [0] = {
+ .name = "DSP-UBL",
+ .offset = 0,
+ .size = SZ_8K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [1] = {
+ .name = "ARM-UBL",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_16K + SZ_8K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [2] = {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K - SZ_32K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [3] = {
+ .name = "U-Boot-Environment",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_16K,
+ .mask_flags = 0,
+ },
+ [4] = {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
There's no need to explicitly init to 0.
WBR, Sergei
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
