Hi Steve, On Thu, Jan 13, 2011 at 19:53:26, Steve Chen wrote: > Hello, > > Running latest Davinci git kernel. I issued > > # echo mem > /sys/power/state > > to put DA850 EVM in sleep mode. I'm unable to wake up the processor > (tried UART, USB, or Ethernet). Anyone knows how to bring the > processor back? >
I am facing an issue while doing suspend/resume on latest DaVinci git kernel. I followed: * Compiled using da8xx_omapl_defconfig. * Enabled CONFIG_PM and CONFIG_SUSPEND * booted the EVM using NFS * issued "echo mem > /sys/power/state" At this stage I did not see any messages on the console. So I added "no_console_suspend" to bootargs and got the below error messages after issuing "echo mem > /sys/power/state": ------------[ cut here ]------------ WARNING: at drivers/net/davinci_emac.c:1040 emac_rx_handler+0xf0/0x110() Modules linked in: [<c002d81c>] (unwind_backtrace+0x0/0xec) from [<c003d0b4>] (warn_slowpath_common+0x4c/0x64) [<c003d0b4>] (warn_slowpath_common+0x4c/0x64) from [<c003d0e4>] (warn_slowpath_null+0x18/0x1c) [<c003d0e4>] (warn_slowpath_null+0x18/0x1c) from [<c01a7c08>] (emac_rx_handler+0xf0/0x110) [<c01a7c08>] (emac_rx_handler+0xf0/0x110) from [<c01a87a4>] (__cpdma_chan_free+0xb0/0xb4) [<c01a87a4>] (__cpdma_chan_free+0xb0/0xb4) from [<c01a8ab8>] (cpdma_chan_stop+0x174/0x1d4) [<c01a8ab8>] (cpdma_chan_stop+0x174/0x1d4) from [<c01a8b98>] (cpdma_ctlr_stop+0x80/0xe4) [<c01a8b98>] (cpdma_ctlr_stop+0x80/0xe4) from [<c01a72a8>] (emac_dev_stop+0xb0/0x168) [<c01a72a8>] (emac_dev_stop+0xb0/0x168) from [<c01a7378>] (davinci_emac_suspend+0x18/0x30) [<c01a7378>] (davinci_emac_suspend+0x18/0x30) from [<c019d5ec>] (platform_pm_suspend+0x30/0x5c) [<c019d5ec>] (platform_pm_suspend+0x30/0x5c) from [<c019fdd4>] (pm_op+0x4c/0xac) [<c019fdd4>] (pm_op+0x4c/0xac) from [<c01a0674>] (__device_suspend+0xec/0x140) [<c01a0674>] (__device_suspend+0xec/0x140) from [<c01a0934>] (dpm_suspend_start+0x26c/0x36c) [<c01a0934>] (dpm_suspend_start+0x26c/0x36c) from [<c006cca0>] (suspend_devices_and_enter+0x40/0x1ac) [<c006cca0>] (suspend_devices_and_enter+0x40/0x1ac) from [<c006ceb0>] (enter_state+0xa4/0xe0) [<c006ceb0>] (enter_state+0xa4/0xe0) from [<c006c5d8>] (state_store+0x90/0xb8) [<c006c5d8>] (state_store+0x90/0xb8) from [<c0159dc8>] (kobj_attr_store+0x18/0x1c) [<c0159dc8>] (kobj_attr_store+0x18/0x1c) from [<c00e5dbc>] (sysfs_write_file+0x108/0x140) [<c00e5dbc>] (sysfs_write_file+0x108/0x140) from [<c009cc30>] (vfs_write+0xac/0x134) [<c009cc30>] (vfs_write+0xac/0x134) from [<c009cd64>] (sys_write+0x3c/0x68) [<c009cd64>] (sys_write+0x3c/0x68) from [<c0028f80>] (ret_fast_syscall+0x0/0x2c) ---[ end trace febdd54cdf7fde9e ]--- I saw that you have mentioned that suspend/resume worked fine for you. Have you tried suspend/resume when using NFS root file system? I have not enabled any drivers in menuconfig except for I2C, Watchdog, RTC and Ethernet. emac_rx_handler() function was introduced by commit id 3ef0fdb2342cf58f617ce2bdcd133978629c2403. I have also cc'ed the author of this commit, just in case he can help. Regards, Sudhakar _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
