Hello.
On 24-03-2011 12:08, Nori, Sekhar wrote:
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 68fe4c2..276199d 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -373,6 +373,14 @@ static struct clk spi1_clk = {
.flags = DA850_CLK_ASYNC3,
};
+static struct clk sata_clk = {
+ .name = "sata",
+ .parent =&pll0_sysclk2,
+ .lpsc = DA850_LPSC1_SATA,
+ .gpsc = 1,
+ .flags = PSC_FORCE,
+};
+
static struct clk_lookup da850_clks[] = {
CLK(NULL, "ref", &ref_clk),
CLK(NULL, "pll0", &pll0_clk),
@@ -419,6 +427,7 @@ static struct clk_lookup da850_clks[] = {
CLK(NULL, "usb20", &usb20_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
CLK("spi_davinci.1", NULL, &spi1_clk),
+ CLK("ahci", NULL, &sata_clk),
CLK(NULL, NULL, NULL),
};
I'd put the above into a separate patch...
Why should addition of clock data not be in the same patch
as the one which adds platform resources etc? It is not a big
deal to change, but I would like to know why you request this.
I didn't request anything, I just said what I'd have done. :-)
I think modifying the DA8xx-common and DA850-specific files should better be
done separately. Although in this case we're adding DA850 only device, so
perhaps the added code in devices-da8xx.c should be enclosed into #ifdef?
diff --git a/arch/arm/mach-davinci/devices-da8xx.c
b/arch/arm/mach-davinci/devices-da8xx.c
index 625d4b6..e061396 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
[...]
@@ -834,3 +836,139 @@ int __init da8xx_register_spi(int instance, struct
spi_board_info *info,
[...]
+/* Supported DA850 SATA crystal frequencies */
+#define KHZ_TO_HZ(freq) ((freq) * 1000)
+static unsigned long da850_sata_xtal[] = {
+ KHZ_TO_HZ(300000),
+ KHZ_TO_HZ(250000),
+ 0, /* Reserved */
Why reserve a place for it at all?
Because then this table maps one-to-one to the hardware
defined table.
Ah, sorry, have missed that...
+ val = SATA_PHY_MPY(i + 1);
+ }
+
[...]
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h
b/arch/arm/mach-davinci/include/mach/da8xx.h
index e4fc1af..aa6f08e 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
[...]
@@ -65,6 +66,7 @@ extern unsigned int da850_max_speed;
#define DA8XX_GPIO_BASE 0x01e26000
#define DA8XX_PSC1_BASE 0x01e27000
#define DA8XX_LCD_CNTRL_BASE 0x01e13000
+#define DA850_SATA_BASE 0x01e18000
It's used only in devices-da8xx.c -- shouldn't it be declared there?
Yes, will move. Base addresses for modules like LCD and MMCSD can be
moved as well - should be subject of some future clean-up patch.
Yes, maybe I'll submit one...
Thanks,
Sekhar
WBR, Sergei
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
