On Saturday, May 14, 2011, mark gross wrote: > On Fri, May 13, 2011 at 06:54:57PM +0200, Rafael J. Wysocki wrote: > > On Friday, May 13, 2011, Raffaele Recalcati wrote: > > > Hi Rafael, > > > > > > 2011/5/12 Rafael J. Wysocki <[email protected]>: > > > > On Thursday, May 12, 2011, Raffaele Recalcati wrote: > > > >> What happen normally in runtime pm implementation is that every devices > > > >> are switched off and are enabled only when needed. > > > >> In our case instead we have a completely functional embedded system > > > >> and, > > > >> when an asyncrhonous event appear, we have only some tens milliseconds > > > >> before the actual power failure takes place. > > > >> This patchset add a support in order to switch off not vital part of > > > >> the system, > > > >> in order to allow the board to survive longer. > > > >> This allow the possibility to save important data. > > > > > > > > OK, so first, who decides what parts of the system are vital and what > > > > aren't? > > > > > > Take a quick look at Documentation/power/loss.txt paragrpah "2.4 > > > Power loss policies". > > > You can decide what can be powered off. > > > > I read the patches. My question was about the general idea of who should > > be responsible of making these decisions. > > I would expect the system integrator would based on the application the > device is getting deployed into. > > A generic opportunistic policy for peripherals that are stateless and can > be trivially power gated off/on from an ISR could be a default but, for > peripherals that need to do some processing (like waiting on an eMMC DMA > to complete) can take time to power down into a safe state.
What do you mean by safe state? Rafael _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
