Hi
I have encountered a problem with DM467. It is the same problem
with the one you described in
http://linux.omap.com/pipermail/davinci-linux-open-source/2009-January/01050
5.html.
At first, I run the demo app 'encode' for several times. Everything
is OK. Then I connect a little board(a hdmi receiver) with the DM6467
daughter board. I try to run the demo app 'encode' again. Then a problem
occurs. You can see the log as foolowing:
[email protected]:/dm6467# ./encode -v 1.264
Encode demo started.
DaVinci I2C WARNING: i2c: NACK detected
DaVinci I2C WARNING: i2c: NACK detected
DaVinci I2C WARNING: i2c: AL detected
DaVinci I2C WARNING: i2c: cmd complete failed: complete = 0x0,
icstr = 0x410
DaVinci I2C WARNING: i2c: cmd complete failed: complete = 0x0,
icstr = 0x410
DaVinci I2C WARNING: i2c: cmd complete failed: complete = 0x0,
icstr = 0x410
DaVinci I2C WARNING: i2c: cmd complete failed: complete = 0x0,
icstr = 0x410
DaVinci I2C WARNING: i2c: cmd complete failed: complete = 0x0,
icstr = 0x410
DaVinci I2C WARNING: i2c: cmd complete failed: complete = 0x0,
icstr = 0x410
DaVinci I2C WARNING: i2c: cmd complete failed: complete = 0x0,
icstr = 0x410
DaVinci I2C WARNING: i2c: cmd complete failed: complete = 0x0,
icstr = 0x410
DaVinci I2C WARNING: i2c: cmd complete failed: complete = 0x0,
icstr = 0x410
THS7353
DaVinci I2C WARNING: i2c: cmd complete failed: complete = 0x0,
icstr = 0x410
DaVinci I2C WARNING: i2c: cmd complete failed: complete = 0x0,
icstr = 0x410
DaVinci I2C WARNING: i2c: cmd complete failed: complete = 0x0,
icstr = 0x410
DaVinci I2C WARNING: i2c: cmd complete failed: complete = 0x0,
icstr = 0x410
DaVinci I2C WARNING: i2c: cmd complete failed: complete = 0x0,
icstr = 0x410
Failed to set cpld bit.
i2c_adapter i2c-0: Set standard failed
How did you solve the problem? Can you give me a hand? Thanks!
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
