On Monday, September 19, 2011 07:35:27 Manjunath Hadli wrote:
> This patch implements the core additions to the display driver,
> mainly controlling the VENC and other encoders for dm365.
> This patch also includes addition of amplifier subdevice to the
> vpbe driver and interfacing with venc subdevice.
>
> Signed-off-by: Manjunath Hadli <[email protected]>
> ---
> drivers/media/video/davinci/vpbe.c | 55
> ++++++++++++++++++++++++++++++++++--
> include/media/davinci/vpbe.h | 16 ++++++++++
> 2 files changed, 68 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/media/video/davinci/vpbe.c
> b/drivers/media/video/davinci/vpbe.c
> index d773d30..21a8645 100644
> --- a/drivers/media/video/davinci/vpbe.c
> +++ b/drivers/media/video/davinci/vpbe.c
> @@ -141,11 +141,12 @@ static int vpbe_enum_outputs(struct vpbe_device
> *vpbe_dev,
> return 0;
> }
>
> -static int vpbe_get_mode_info(struct vpbe_device *vpbe_dev, char *mode)
> +static int vpbe_get_mode_info(struct vpbe_device *vpbe_dev, char *mode,
> + int output_index)
> {
> struct vpbe_config *cfg = vpbe_dev->cfg;
> struct vpbe_enc_mode_info var;
> - int curr_output = vpbe_dev->current_out_index;
> + int curr_output = output_index;
> int i;
>
> if (NULL == mode)
> @@ -245,6 +246,8 @@ static int vpbe_set_output(struct vpbe_device *vpbe_dev,
> int index)
> struct encoder_config_info *curr_enc_info =
> vpbe_current_encoder_info(vpbe_dev);
> struct vpbe_config *cfg = vpbe_dev->cfg;
> + struct venc_platform_data *venc_device = vpbe_dev->venc_device;
> + enum v4l2_mbus_pixelcode if_params;
> int enc_out_index;
> int sd_index;
> int ret = 0;
> @@ -274,6 +277,8 @@ static int vpbe_set_output(struct vpbe_device *vpbe_dev,
> int index)
> goto out;
> }
>
> + if_params = cfg->outputs[index].if_params;
> + venc_device->setup_if_config(if_params);
> if (ret)
> goto out;
> }
> @@ -293,7 +298,7 @@ static int vpbe_set_output(struct vpbe_device *vpbe_dev,
> int index)
> * encoder.
> */
> ret = vpbe_get_mode_info(vpbe_dev,
> - cfg->outputs[index].default_mode);
> + cfg->outputs[index].default_mode, index);
> if (!ret) {
> struct osd_state *osd_device = vpbe_dev->osd_device;
>
> @@ -367,6 +372,11 @@ static int vpbe_s_dv_preset(struct vpbe_device *vpbe_dev,
>
> ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
> s_dv_preset, dv_preset);
> + if (!ret && (vpbe_dev->amp != NULL)) {
> + /* Call amplifier subdevice */
> + ret = v4l2_subdev_call(vpbe_dev->amp, video,
> + s_dv_preset, dv_preset);
> + }
> /* set the lcd controller output for the given mode */
> if (!ret) {
> struct osd_state *osd_device = vpbe_dev->osd_device;
> @@ -566,6 +576,8 @@ static int platform_device_get(struct device *dev, void
> *data)
>
> if (strcmp("vpbe-osd", pdev->name) == 0)
> vpbe_dev->osd_device = platform_get_drvdata(pdev);
> + if (strcmp("vpbe-venc", pdev->name) == 0)
> + vpbe_dev->venc_device = dev_get_platdata(&pdev->dev);
>
> return 0;
> }
> @@ -584,6 +596,7 @@ static int platform_device_get(struct device *dev, void
> *data)
> static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev)
> {
> struct encoder_config_info *enc_info;
> + struct amp_config_info *amp_info;
> struct v4l2_subdev **enc_subdev;
> struct osd_state *osd_device;
> struct i2c_adapter *i2c_adap;
> @@ -704,6 +717,39 @@ static int vpbe_initialize(struct device *dev, struct
> vpbe_device *vpbe_dev)
> v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders"
> " currently not supported");
> }
> + /* Add amplifier subdevice for dm365 */
> + if ((strcmp(vpbe_dev->cfg->module_name, "dm365-vpbe-display") == 0) &&
> + vpbe_dev->cfg->amp != NULL) {
> + vpbe_dev->amp = kmalloc(sizeof(struct v4l2_subdev *),
> + GFP_KERNEL);
Huh? Why alloc a struct v4l2_subdev pointer here?
> + if (vpbe_dev->amp == NULL) {
> + v4l2_err(&vpbe_dev->v4l2_dev,
> + "unable to allocate memory for sub device");
> + ret = -ENOMEM;
> + goto vpbe_fail_v4l2_device;
> + }
> + amp_info = vpbe_dev->cfg->amp;
> + if (amp_info->is_i2c) {
> + vpbe_dev->amp = v4l2_i2c_new_subdev_board(
> + &vpbe_dev->v4l2_dev, i2c_adap,
> + &_info->board_info, NULL);
Especially since it is overwritten here! And so causes a memory leak.
The kmalloc above (and the kfree below) feels like old code that should have
been removed.
> + if (!vpbe_dev->amp) {
> + v4l2_err(&vpbe_dev->v4l2_dev,
> + "amplifier %s failed to register",
> + amp_info->module_name);
> + ret = -ENODEV;
> + goto vpbe_fail_amp_register;
> + }
> + v4l2_info(&vpbe_dev->v4l2_dev,
> + "v4l2 sub device %s registered\n",
> + amp_info->module_name);
> + } else {
> + vpbe_dev->amp = NULL;
> + v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c amplifiers"
> + " currently not supported");
> + }
> + } else
> + vpbe_dev->amp = NULL;
>
> /* set the current encoder and output to that of venc by default */
> vpbe_dev->current_sd_index = 0;
> @@ -731,6 +777,8 @@ static int vpbe_initialize(struct device *dev, struct
> vpbe_device *vpbe_dev)
> /* TBD handling of bootargs for default output and mode */
> return 0;
>
> +vpbe_fail_amp_register:
> + kfree(vpbe_dev->amp);
> vpbe_fail_sd_register:
> kfree(vpbe_dev->encoders);
> vpbe_fail_v4l2_device:
> @@ -757,6 +805,7 @@ static void vpbe_deinitialize(struct device *dev, struct
> vpbe_device *vpbe_dev)
> if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0)
> clk_put(vpbe_dev->dac_clk);
>
> + kfree(vpbe_dev->amp);
> kfree(vpbe_dev->encoders);
> vpbe_dev->initialized = 0;
> /* disable vpss clocks */
> diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h
> index 8b11fb0..8bc1b3c 100644
> --- a/include/media/davinci/vpbe.h
> +++ b/include/media/davinci/vpbe.h
> @@ -63,6 +63,7 @@ struct vpbe_output {
> * output basis. If per mode is needed, we may have to move this to
> * mode_info structure
> */
> + enum v4l2_mbus_pixelcode if_params;
> };
>
> /* encoder configuration info */
> @@ -74,6 +75,15 @@ struct encoder_config_info {
> struct i2c_board_info board_info;
> };
>
> +/*amplifier configuration info */
> +struct amp_config_info {
> + char module_name[32];
> + /* Is this an i2c device ? */
> + unsigned int is_i2c:1;
> + /* i2c subdevice board info */
> + struct i2c_board_info board_info;
> +};
> +
> /* structure for defining vpbe display subsystem components */
> struct vpbe_config {
> char module_name[32];
> @@ -84,6 +94,8 @@ struct vpbe_config {
> /* external encoder information goes here */
> int num_ext_encoders;
> struct encoder_config_info *ext_encoders;
> + /* amplifier information goes here */
> + struct amp_config_info *amp;
> int num_outputs;
> /* Order is venc outputs followed by LCD and then external encoders */
> struct vpbe_output *outputs;
> @@ -158,6 +170,8 @@ struct vpbe_device {
> struct v4l2_subdev **encoders;
> /* current encoder index */
> int current_sd_index;
> + /* external amplifier v4l2 subdevice */
> + struct v4l2_subdev *amp;
> struct mutex lock;
> /* device initialized */
> int initialized;
> @@ -165,6 +179,8 @@ struct vpbe_device {
> struct clk *dac_clk;
> /* osd_device pointer */
> struct osd_state *osd_device;
> + /* venc device pointer */
> + struct venc_platform_data *venc_device;
> /*
> * fields below are accessed by users of vpbe_device. Not the
> * ones above
>
Regards,
Hans
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
