On 11/15/2011 12:02 PM, Manjunathappa, Prakash wrote:
> Patch follows the disable and software reset sequence specified
> in version2 to LCDC functional specification.
> Without this flicker is observed on re-enabling the LCDC.
> 
> Signed-off-by: Manjunathappa, Prakash <[email protected]>

Applied.


Thanks,

Florian Tobias Schandinat

> ---
>  drivers/video/da8xx-fb.c |   15 ++++++++++++++-
>  1 files changed, 14 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
> index e111971..6b27751 100644
> --- a/drivers/video/da8xx-fb.c
> +++ b/drivers/video/da8xx-fb.c
> @@ -118,6 +118,7 @@
>  /* Clock registers available only on Version 2 */
>  #define  LCD_CLK_ENABLE_REG                  0x6c
>  #define  LCD_CLK_RESET_REG                   0x70
> +#define  LCD_CLK_MAIN_RESET                  BIT(3)
>  
>  #define LCD_NUM_BUFFERS      2
>  
> @@ -246,6 +247,10 @@ static inline void lcd_enable_raster(void)
>  {
>       u32 reg;
>  
> +     /* Bring LCDC out of reset */
> +     if (lcd_revision == LCD_VERSION_2)
> +             lcdc_write(0, LCD_CLK_RESET_REG);
> +
>       reg = lcdc_read(LCD_RASTER_CTRL_REG);
>       if (!(reg & LCD_RASTER_ENABLE))
>               lcdc_write(reg | LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG);
> @@ -259,6 +264,10 @@ static inline void lcd_disable_raster(void)
>       reg = lcdc_read(LCD_RASTER_CTRL_REG);
>       if (reg & LCD_RASTER_ENABLE)
>               lcdc_write(reg & ~LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG);
> +
> +     if (lcd_revision == LCD_VERSION_2)
> +             /* Write 1 to reset LCDC */
> +             lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG);
>  }
>  
>  static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
> @@ -618,8 +627,12 @@ static void lcd_reset(struct da8xx_fb_par *par)
>       lcdc_write(0, LCD_DMA_CTRL_REG);
>       lcdc_write(0, LCD_RASTER_CTRL_REG);
>  
> -     if (lcd_revision == LCD_VERSION_2)
> +     if (lcd_revision == LCD_VERSION_2) {
>               lcdc_write(0, LCD_INT_ENABLE_SET_REG);
> +             /* Write 1 to reset */
> +             lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG);
> +             lcdc_write(0, LCD_CLK_RESET_REG);
> +     }
>  }
>  
>  static void lcd_calc_clk_divider(struct da8xx_fb_par *par)

_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to