Hi Mike, On Tue, Feb 07, 2012 at 22:15:33, Michael Williamson wrote: > Hello Prakash, > > On 2/7/2012 10:11 AM, Manjunathappa, Prakash wrote: > > > NAND and NOR device are made as aemif device slaves, hence all DaVinci > > board NAND/NOR device registration achieved via aemif MFD driver. > > > > Signed-off-by: Manjunathappa, Prakash <[email protected]> > > --- > > Since v2: > > Make changes for all DaVinci boards in single patch. > > > > [...] > > > diff --git a/arch/arm/mach-davinci/board-mityomapl138.c > > b/arch/arm/mach-davinci/board-mityomapl138.c > > index 672d820..bb29b7a 100644 > > --- a/arch/arm/mach-davinci/board-mityomapl138.c > > +++ b/arch/arm/mach-davinci/board-mityomapl138.c > > @@ -19,6 +19,7 @@ > > #include <linux/etherdevice.h> > > #include <linux/spi/spi.h> > > #include <linux/spi/flash.h> > > +#include <linux/mfd/davinci_aemif.h> > > > > #include <asm/io.h> > > #include <asm/mach-types.h> > > @@ -414,18 +415,35 @@ static struct resource > > mityomapl138_nandflash_resource[] = { > > }, > > }; > > > > -static struct platform_device mityomapl138_nandflash_device = { > > - .name = "davinci_nand", > > - .id = 1, > > - .dev = { > > - .platform_data = &mityomapl138_nandflash_data, > > +static struct platform_device mityomapl138_emif_devices[] __initdata = { > > + { > > + .name = "davinci_nand", > > + .id = 0, > > > > Pretty sure this still needs to be a 1. The nand is on chip select 3, > EMA_CS3, which I believe is the same as the da850 EVM.
Yes I could not test on this board. I will make id as 1. Thanks, Prakash > > -Mike > > > _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
