From: Vaibhav Hiremath <hvaib...@ti.com> OMAP1 RTC driver is used in multiple devices like, OMAPL138 and AM33XX. Driver currently doesn't handle any clocks, which may be right for OMAP1 architecture but in case of AM33XX, the clock/module needs to be enabled in order to access the registers.
So covert this driver to runtime pm, which internally handles rest. Afzal: handle error path Signed-off-by: Vaibhav Hiremath <hvaib...@ti.com> Signed-off-by: Afzal Mohammed <af...@ti.com> --- drivers/rtc/rtc-omap.c | 18 ++++++++++++++++++ 1 files changed, 18 insertions(+), 0 deletions(-) diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index f7cc4b0..a64f98a 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -22,6 +22,7 @@ #include <linux/platform_device.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/pm_runtime.h> #include <asm/io.h> @@ -363,6 +364,10 @@ static int __init omap_rtc_probe(struct platform_device *pdev) goto fail; } + /* Enable the clock/module so that we can access the registers */ + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + id_entry = platform_get_device_id(pdev); if (id_entry && (id_entry->driver_data & OMAP_RTC_HAS_KICKER)) { rtc_writel(KICK0_VALUE, OMAP_RTC_KICK0_R); @@ -447,6 +452,8 @@ fail1: fail0: if (id_entry && (id_entry->driver_data & OMAP_RTC_HAS_KICKER)) rtc_writel(0, OMAP_RTC_KICK0_R); + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); iounmap(rtc_base); fail: release_mem_region(mem->start, resource_size(mem)); @@ -473,6 +480,11 @@ static int __exit omap_rtc_remove(struct platform_device *pdev) rtc_device_unregister(rtc); if (id_entry && (id_entry->driver_data & OMAP_RTC_HAS_KICKER)) rtc_writel(0, OMAP_RTC_KICK0_R); + + /* Disable the clock/module */ + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + iounmap(rtc_base); release_mem_region(mem->start, resource_size(mem)); return 0; @@ -495,11 +507,17 @@ static int omap_rtc_suspend(struct platform_device *pdev, pm_message_t state) else rtc_write(0, OMAP_RTC_INTERRUPTS_REG); + /* Disable the clock/module */ + pm_runtime_put_sync(&pdev->dev); + return 0; } static int omap_rtc_resume(struct platform_device *pdev) { + /* Enable the clock/module so that we can access the registers */ + pm_runtime_get_sync(&pdev->dev); + if (device_may_wakeup(&pdev->dev)) disable_irq_wake(omap_rtc_alarm); else -- 1.7.1 _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source