Hello.

On 08-08-2012 19:35, Manjunathappa, Prakash wrote:

LCD controller on am335x supports 24bpp raster configuration in addition
to ones on da850. LCDC also supports 24bpp in unpacked format having
ARGB:8888 32bpp format data in DDR, but it doesn't interpret alpha
component of the data.

Signed-off-by: Manjunathappa, Prakash <[email protected]>
Cc: Anatolij Gustschin <[email protected]>
[...]

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 7ae9d53..1abcfa9 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
[...]
@@ -499,6 +501,9 @@ static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, 
u32 width, u32 height,
  {
        u32 reg;

+       if ((bpp > 16) && (lcd_revision == LCD_VERSION_1))

   Parens around operands of && not necessary.

@@ -542,6 +547,12 @@ static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, 
u32 width, u32 height,
        reg = lcdc_read(LCD_RASTER_CTRL_REG) & ~(1 << 8);
        if (raster_order)
                reg |= LCD_RASTER_ORDER;
+
+       if (bpp == 24)
+               reg |= LCD_V2_TFT_24BPP_MODE;
+       else if (bpp == 32)
+               reg |= (LCD_V2_TFT_24BPP_MODE | LCD_V2_TFT_24BPP_UNPACK);
+

   This asks to be a *switch* statement.

        lcdc_write(reg, LCD_RASTER_CTRL_REG);

        switch (bpp) {
@@ -549,6 +560,8 @@ static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, 
u32 width, u32 height,
        case 2:
        case 4:
        case 16:
+       case 24:
+       case 32:
                par->palette_sz = 16 * 2;
                break;

@@ -578,13 +591,36 @@ static int fb_setcolreg(unsigned regno, unsigned red, 
unsigned green,
        if (info->fix.visual == FB_VISUAL_DIRECTCOLOR)
                return 1;

-       if (info->var.bits_per_pixel == 4) {
-               if (regno > 15)
-                       return 1;
+       if ((info->var.bits_per_pixel > 16) && (lcd_revision == LCD_VERSION_1))

   Parens around operands of && not necessary.

+       switch (info->fix.visual) {
+       case FB_VISUAL_TRUECOLOR:
+               red = CNVT_TOHW(red, info->var.red.length);
+               green = CNVT_TOHW(green, info->var.green.length);
+               blue = CNVT_TOHW(blue, info->var.blue.length);
+               break;
+       case FB_VISUAL_PSEUDOCOLOR:
+               if (info->var.bits_per_pixel == 4) {
+                       if (regno > 15)
+                               return -EINVAL;
+
+                       if (info->var.grayscale) {
+                               pal = regno;
+                       } else {
+                               red >>= 4;
+                               green >>= 8;
+                               blue >>= 12;
+
+                               pal = (red & 0x0f00);
+                               pal |= (green & 0x00f0);
+                               pal |= (blue & 0x000f);

   Parens not needed.

+                       }
+                       if (regno == 0)
+                               pal |= 0x2000;
+                       palette[regno] = pal;
+
+               } else if (info->var.bits_per_pixel == 8) {

   This asks to be a *switch* statement.

@@ -842,6 +877,9 @@ static int fb_check_var(struct fb_var_screeninfo *var,
  {
        int err = 0;

+       if ((var->bits_per_pixel > 16) && (lcd_revision == LCD_VERSION_1))

   Parens around operands of && not necessary.

WBR, Sergei

_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to