On Sat, Aug 18, 2012 at 04:11:32, Mark Brown wrote: > On Tue, Aug 14, 2012 at 06:12:02PM +0530, Hebbar, Gururaja wrote: > > > +- op-mode : I2S/DIT ops mode. > > This would normally be part of the machine binding since it needs to be > applied to both ends of the link.
But in case of McASP driver, it is used when calling snd_soc_register_dai() To pick the proper dai depending on the McASP operation mode. > When adding it could you come up with > a generic binding for this in terms of the current ASoC DAI paremeters > please? That way we'll be able to have other machine drivers be > consistent with this one. Will look into this once I complete the initial DT porting. > > > +- tdm-slots : Slots for TDM operation. > > This would normally also be a machine driver thing though it's less > normal to need to configure this on both ends. > This parameter is used by McASP hardware controller for managing slots and Isn't related to any machine modules. Regards, Gururaja _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
