As a first step towards migrating davinci platforms to use common clock
framework, replace all instances of clk_enable() with clk_prepare_enable()
and clk_disable() with clk_disable_unprepare(). Until the platform is
switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just
adds a might_sleep() call and would work without any issues.

This will make it easy later to switch to common clk based implementation
of clk driver from DaVinci specific driver.

Signed-off-by: Murali Karicheri <[email protected]>
---
 drivers/i2c/busses/i2c-davinci.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 79b4bcb..8e47ec1 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -681,7 +681,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
                r = -ENODEV;
                goto err_free_mem;
        }
-       clk_enable(dev->clk);
+       clk_prepare_enable(dev->clk);
 
        dev->base = ioremap(mem->start, resource_size(mem));
        if (!dev->base) {
@@ -726,7 +726,7 @@ err_free_irq:
 err_unuse_clocks:
        iounmap(dev->base);
 err_mem_ioremap:
-       clk_disable(dev->clk);
+       clk_disable_unprepare(dev->clk);
        clk_put(dev->clk);
        dev->clk = NULL;
 err_free_mem:
@@ -750,7 +750,7 @@ static int davinci_i2c_remove(struct platform_device *pdev)
        i2c_del_adapter(&dev->adapter);
        put_device(&pdev->dev);
 
-       clk_disable(dev->clk);
+       clk_disable_unprepare(dev->clk);
        clk_put(dev->clk);
        dev->clk = NULL;
 
@@ -772,7 +772,7 @@ static int davinci_i2c_suspend(struct device *dev)
 
        /* put I2C into reset */
        davinci_i2c_reset_ctrl(i2c_dev, 0);
-       clk_disable(i2c_dev->clk);
+       clk_disable_unprepare(i2c_dev->clk);
 
        return 0;
 }
@@ -782,7 +782,7 @@ static int davinci_i2c_resume(struct device *dev)
        struct platform_device *pdev = to_platform_device(dev);
        struct davinci_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
 
-       clk_enable(i2c_dev->clk);
+       clk_prepare_enable(i2c_dev->clk);
        /* take I2C out of reset */
        davinci_i2c_reset_ctrl(i2c_dev, 1);
 
-- 
1.7.9.5

_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to