On Fri, Sep 21, 2012 at 20:54:48, Manjunathappa, Prakash wrote:
> Add pm_runtime support to the da8xx-fb frame buffer driver.
>
> Signed-off-by: Manjunathappa, Prakash <[email protected]>
> ---
> Applies on top of patch "da8xx-fb: enable LCDC if FB is unblanked" under
> review.
>
> drivers/video/da8xx-fb.c | 24 +++++++++++++-----------
> 1 files changed, 13 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
> index af2aa38..17c00b2 100644
> --- a/drivers/video/da8xx-fb.c
> +++ b/drivers/video/da8xx-fb.c
> @@ -26,6 +26,7 @@
> #include <linux/device.h>
> #include <linux/platform_device.h>
> #include <linux/uaccess.h>
> +#include <linux/pm_runtime.h>
> #include <linux/interrupt.h>
> #include <linux/wait.h>
> #include <linux/clk.h>
> @@ -1037,8 +1038,8 @@ static int __devexit fb_remove(struct platform_device
> *dev)
> dma_free_coherent(NULL, par->vram_size, par->vram_virt,
> par->vram_phys);
> free_irq(par->irq, par);
> - clk_disable(par->lcdc_clk);
> - clk_put(par->lcdc_clk);
> + pm_runtime_put_sync(&dev->dev);
> + pm_runtime_disable(&dev->dev);
> framebuffer_release(info);
> iounmap((void __iomem *)da8xx_fb_reg_base);
> release_mem_region(lcdc_regs->start, resource_size(lcdc_regs));
> @@ -1272,9 +1273,9 @@ static int __devinit fb_probe(struct platform_device
> *device)
> ret = -ENODEV;
> goto err_ioremap;
> }
> - ret = clk_enable(fb_clk);
> - if (ret)
> - goto err_clk_put;
> +
> + pm_runtime_enable(&device->dev);
> + pm_runtime_get_sync(&device->dev);
>
> /* Determine LCD IP Version */
> switch (lcdc_read(LCD_PID_REG)) {
> @@ -1302,7 +1303,7 @@ static int __devinit fb_probe(struct platform_device
> *device)
> if (i == ARRAY_SIZE(known_lcd_panels)) {
> dev_err(&device->dev, "GLCD: No valid panel found\n");
> ret = -ENODEV;
> - goto err_clk_disable;
> + goto err_pm_runtime_disable;
> } else
> dev_info(&device->dev, "GLCD: Found %s panel\n",
> fb_pdata->type);
> @@ -1314,7 +1315,7 @@ static int __devinit fb_probe(struct platform_device
> *device)
> if (!da8xx_fb_info) {
> dev_dbg(&device->dev, "Memory allocation failed for fb_info\n");
> ret = -ENOMEM;
> - goto err_clk_disable;
> + goto err_pm_runtime_disable;
> }
>
> par = da8xx_fb_info->par;
> @@ -1476,8 +1477,9 @@ err_release_fb_mem:
> err_release_fb:
> framebuffer_release(da8xx_fb_info);
>
> -err_clk_disable:
> - clk_disable(fb_clk);
> +err_pm_runtime_disable:
> + pm_runtime_put_sync(&device->dev);
> + pm_runtime_disable(&device->dev);
>
> err_clk_put:
> clk_put(fb_clk);
> @@ -1503,7 +1505,7 @@ static int fb_suspend(struct platform_device *dev,
> pm_message_t state)
>
> fb_set_suspend(info, 1);
> lcd_disable_raster(true);
> - clk_disable(par->lcdc_clk);
> + pm_runtime_put(&dev->dev);
Isn't here you should use pm_runtime_put_sync()??
Thanks,
Vaibhv
> console_unlock();
>
> return 0;
> @@ -1514,7 +1516,7 @@ static int fb_resume(struct platform_device *dev)
> struct da8xx_fb_par *par = info->par;
>
> console_lock();
> - clk_enable(par->lcdc_clk);
> + pm_runtime_get_sync(&dev->dev);
> if (par->blank == FB_BLANK_UNBLANK) {
> lcd_enable_raster();
>
> --
> 1.7.0.4
>
> _______________________________________________
> Davinci-linux-open-source mailing list
> [email protected]
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
>
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
