On Thu, Oct 18, 2012 at 18:56:52, Porter, Matt wrote:
> Adds AM33XX MMC support for am335x-bone and am335x-evm.
>
> Signed-off-by: Matt Porter <mpor...@ti.com>
> ---
> arch/arm/boot/dts/am335x-bone.dts | 6 ++++++
> arch/arm/boot/dts/am335x-evm.dts | 6 ++++++
> arch/arm/boot/dts/am33xx.dtsi | 27 +++++++++++++++++++++++++++
> 3 files changed, 39 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am335x-bone.dts
> b/arch/arm/boot/dts/am335x-bone.dts
> index c634f87..5510979 100644
> --- a/arch/arm/boot/dts/am335x-bone.dts
> +++ b/arch/arm/boot/dts/am335x-bone.dts
> @@ -70,6 +70,8 @@
> };
>
> ldo3_reg: regulator@5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
I think these min & max limits are regulator limits. Are these fields
required? Add details of these additions. AFAIK fine-tuned (board
specific) min/max limits should be add here(like mpu and core
regulator nodes)
> regulator-always-on;
> };
>
> @@ -78,3 +80,7 @@
> };
> };
> };
> +
> +&mmc1 {
> + vmmc-supply = <&ldo3_reg>;
> +};
> diff --git a/arch/arm/boot/dts/am335x-evm.dts
> b/arch/arm/boot/dts/am335x-evm.dts
> index 185d632..d63fce8 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -114,7 +114,13 @@
> };
>
> vmmc_reg: regulator@12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
=same=
> regulator-always-on;
> };
> };
> };
> +
> +&mmc1 {
> + vmmc-supply = <&vmmc_reg>;
> +};
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index ab9c78f..26a6af7 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -234,6 +234,33 @@
> status = "disabled";
> };
>
> + mmc1: mmc@48060000 {
> + compatible = "ti,omap3-hsmmc";
> + ti,hwmods = "mmc1";
> + ti,dual-volt;
> + ti,needs-special-reset;
> + dmas = <&edma 24
> + &edma 25>;
> + dma-names = "tx", "rx";
Add status = "disabled" here and "okay" in corresponding
.dts file
> + };
> +
> + mmc2: mmc@481d8000 {
> + compatible = "ti,omap3-hsmmc";
> + ti,hwmods = "mmc2";
> + ti,needs-special-reset;
> + dmas = <&edma 2
> + &edma 3>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + mmc3: mmc@47810000 {
> + compatible = "ti,omap3-hsmmc";
> + ti,hwmods = "mmc3";
> + ti,needs-special-reset;
What about DMA resources for mmc3?
AnilKumar
> + status = "disabled";
> + };
> +
> wdt2: wdt@44e35000 {
> compatible = "ti,omap3-wdt";
> ti,hwmods = "wd_timer2";
> --
> 1.7.9.5
>
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-disc...@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
>
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
