Add device tree based initialization support for
TI's tps6507x regulators.
Add device tree binding document for TI's tps6507x
using datasheet:
http://www.ti.com/lit/ds/symlink/tps65070.pdf
Signed-off-by: Vishwanathrao Badarkhe, Manish <manish...@ti.com>
---
Documentation/devicetree/bindings/mfd/tps6507x.txt | 91 +++++++++++++++++++
drivers/regulator/tps6507x-regulator.c | 92 ++++++++++++++++++++
2 files changed, 183 insertions(+), 0 deletions(-)
create mode 100755 Documentation/devicetree/bindings/mfd/tps6507x.txt
diff --git a/Documentation/devicetree/bindings/mfd/tps6507x.txt
b/Documentation/devicetree/bindings/mfd/tps6507x.txt
new file mode 100755
index 0000000..8fffa3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps6507x.txt
@@ -0,0 +1,91 @@
+TPS6507x Power Management Integrated Circuit
+
+Required properties:
+- compatible: "ti,tps6507x"
+- reg: I2C slave address
+- regulators: This is the list of child nodes that specify the regulator
+ initialization data for defined regulators. Not all regulators for the
+ given device need to be present. The definition for each of these nodes
+ is defined using the standard binding for regulators found at
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+ The regulator is matched with the regulator-compatible.
+
+ The valid regulator-compatible values are:
+ tps6507x: vdcdc1, vdcdc2, vdcdc3, vldo1, vldo2
+- xxx-supply: Input voltage supply regulator.
+ These entries are required if regulators are enabled for a device.
+ Missing of these properties can cause the regulator registration
+ fails.
+ If some of input supply is powered through battery or always-on
+ supply then also it is require to have these parameters with proper
+ node handle of always on power supply.
+ tps6507x:
+ vindcdc1_2-supply: VDCDC1 and VDCDC2 input.
+ vindcdc3-supply : VDCDC3 input.
+ vldo1_2-supply : VLDO1 and VLDO2 input.
+
+Regulator Optional properties:
+- defdcdc_default: It's property of DCDC2 and DCDC3 regulators.
+ 0: If defdcdc pin of DCDC2/DCDC3 is pulled to GND.
+ 1: If defdcdc pin of DCDC2/DCDC3 is driven HIGH.
+ If this property is not defined, it defaults to 0 (not enabled).
+
+Example:
+
+ pmu: tps6507x@48 {
+ compatible = "ti,tps6507x";
+ reg = <0x48>;
+
+ vindcdc1_2-supply = <&vbat>;
+ vindcdc3-supply = <...>;
+ vinldo1_2-supply = <...>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdcdc1_reg: regulator@0 {
+ regulator-compatible = "VDCDC1";
+ reg = <0>;
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3450000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ vdcdc2_reg: regulator@1 {
+ regulator-compatible = "VDCDC2";
+ reg = <1>;
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <3450000>;
+ regulator-always-on;
+ regulator-boot-on;
+ defdcdc_default = <1>;
+ };
+ vdcdc3_reg: regulator@2 {
+ regulator-compatible = "VDCDC3";
+ reg = <2>;
+ regulator-min-microvolt = <950000>
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ defdcdc_default = <1>;
+ };
+ ldo1_reg: regulator@3 {
+ regulator-compatible = "LDO1";
+ reg = <3>;
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <1890000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo2_reg: regulator@4 {
+ regulator-compatible = "LDO2";
+ reg = <4>;
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+
+ };
diff --git a/drivers/regulator/tps6507x-regulator.c
b/drivers/regulator/tps6507x-regulator.c
index 0233cfb..afdeb65 100644
--- a/drivers/regulator/tps6507x-regulator.c
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -23,8 +23,10 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/tps6507x.h>
+#include <linux/of.h>
#include <linux/slab.h>
#include <linux/mfd/tps6507x.h>
+#include <linux/regulator/of_regulator.h>
/* DCDC's */
#define TPS6507X_DCDC_1 0
@@ -356,6 +358,80 @@ static struct regulator_ops tps6507x_pmic_ops = {
.list_voltage = regulator_list_voltage_table,
};
+#ifdef CONFIG_OF
+static struct of_regulator_match tps6507x_matches[] = {
+ { .name = "VDCDC1"},
+ { .name = "VDCDC2"},
+ { .name = "VDCDC3"},
+ { .name = "LDO1"},
+ { .name = "LDO2"},
+};
+
+static struct tps6507x_board *tps6507x_parse_dt_reg_data(
+ struct platform_device *pdev,
+ struct of_regulator_match **tps6507x_reg_matches)
+{
+ struct tps6507x_board *tps_board;
+ struct device_node *np = pdev->dev.parent->of_node;
+ struct device_node *regulators;
+ struct of_regulator_match *matches;
+ static struct regulator_init_data *reg_data;
+ int idx = 0, count, ret;
+
+ tps_board = devm_kzalloc(&pdev->dev, sizeof(*tps_board),
+ GFP_KERNEL);
+ if (!tps_board) {
+ dev_err(&pdev->dev, "Failure to alloc pdata for regulators.\n");
+ return NULL;
+ }
+
+ regulators = of_find_node_by_name(np, "regulators");
+ if (!regulators) {
+ dev_err(&pdev->dev, "regulator node not found\n");
+ return NULL;
+ }
+
+ count = ARRAY_SIZE(tps6507x_matches);
+ matches = tps6507x_matches;
+
+ ret = of_regulator_match(pdev->dev.parent, regulators, matches, count);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Error parsing regulator init data: %d\n",
+ ret);
+ return NULL;
+ }
+
+ *tps6507x_reg_matches = matches;
+
+ reg_data = devm_kzalloc(&pdev->dev, (sizeof(struct regulator_init_data)
+ * TPS6507X_NUM_REGULATOR), GFP_KERNEL);
+ if (!reg_data) {
+ dev_err(&pdev->dev, "Failure to alloc init data for
regulators.\n");
+ return NULL;
+ }
+
+ tps_board->tps6507x_pmic_init_data = reg_data;
+
+ for (idx = 0; idx < count; idx++) {
+ if (!matches[idx].init_data || !matches[idx].of_node)
+ continue;
+
+ memcpy(®_data[idx], matches[idx].init_data,
+ sizeof(struct regulator_init_data));
+
+ }
+
+ return tps_board;
+}
+#else
+static inline struct tps6507x_board *tps6507x_parse_dt_reg_data(
+ struct platform_device *pdev,
+ struct of_regulator_match **tps6507x_reg_matches)
+{
+ *tps6507x_reg_matches = NULL;
+ return NULL;
+}
+#endif
static int tps6507x_pmic_probe(struct platform_device *pdev)
{
struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
@@ -365,8 +441,10 @@ static int tps6507x_pmic_probe(struct platform_device
*pdev)
struct regulator_dev *rdev;
struct tps6507x_pmic *tps;
struct tps6507x_board *tps_board;
+ struct of_regulator_match *tps6507x_reg_matches = NULL;
int i;
int error;
+ unsigned int prop;
/**
* tps_board points to pmic related constants
@@ -374,6 +452,9 @@ static int tps6507x_pmic_probe(struct platform_device *pdev)
*/
tps_board = dev_get_platdata(tps6507x_dev->dev);
+ if (!tps_board && tps6507x_dev->dev->of_node)
+ tps_board = tps6507x_parse_dt_reg_data(pdev,
+ &tps6507x_reg_matches);
if (!tps_board)
return -EINVAL;
@@ -415,6 +496,17 @@ static int tps6507x_pmic_probe(struct platform_device
*pdev)
config.init_data = init_data;
config.driver_data = tps;
+ if (tps6507x_reg_matches) {
+ error = of_property_read_u32(
+ tps6507x_reg_matches[i].of_node,
+ "ti,defdcdc_default", &prop);
+
+ if (!error)
+ tps->info[i]->defdcdc_default = prop;
+
+ config.of_node = tps6507x_reg_matches[i].of_node;
+ }
+
rdev = regulator_register(&tps->desc[i], &config);
if (IS_ERR(rdev)) {
dev_err(tps6507x_dev->dev,
--
1.7.4.1
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
