On 11/20/2013 08:23 PM, Taras Kondratiuk wrote:
I2C IP block expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.
Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.
Reviewed-by: Grygorii Strashko <grygorii.stras...@ti.com>
Signed-off-by: Taras Kondratiuk <taras.kondrat...@linaro.org>
---
Based on Linus' master tip (b4789b8).
Tested on Keystone2 EVM.
drivers/i2c/busses/i2c-davinci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 132369f..a629447 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -125,12 +125,12 @@ static struct davinci_i2c_platform_data
davinci_i2c_platform_data_default = {
static inline void davinci_i2c_write_reg(struct davinci_i2c_dev *i2c_dev,
int reg, u16 val)
{
- __raw_writew(val, i2c_dev->base + reg);
+ writew_relaxed(val, i2c_dev->base + reg);
}
static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int
reg)
{
- return __raw_readw(i2c_dev->base + reg);
+ return readw_relaxed(i2c_dev->base + reg);
}
/* Generate a pulse on the i2c clock pin. */
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
