Hello.
On 07/31/2014 02:18 PM, Peter Ujfalusi wrote:
The board uses aic3106 for audio.
Signed-off-by: Peter Ujfalusi <[email protected]>
---
arch/arm/boot/dts/da850-evm.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 09118c72e83f..b9ef2be0b145 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -51,6 +51,20 @@
tps: tps@48 {
reg = <0x48>;
};
+ tlv320aic3106: tlv320aic3106@1b {
The "reg" property is <0x18>, why the unit-address part of a name is
different? Also, the ePAPR standard [1] says:
The name of a node should be somewhat generic, reflecting the function of the
device and not its precise programming model.
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x18>;
+ status = "okay";
+
+ /* Regulators */
+ IOVDD-supply = <&vdcdc2_reg>;
+ /* Derived from VBAT: Baseboard 3.3V / 1.8V */
+ AVDD-supply = <&vbat>;
+ DRVDD-supply = <&vbat>;
+ DVDD-supply = <&vbat>;
+ };
+
[1] http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf
WBR, Sergei
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
