I'm not sure if this will help, but I've had similar problems that I fixed
by adding a dbadmin user to the client machine, since the control center
needs to authenticate locally (on the client machine) before it starts.
Another problem I had is running within a NT domain. I would log into
the domain, on my own workstation, but couldn't get the control center
to recognize my username/password. The problem was, I didn't add myself
as a local user on my machine.
I hope this helps,
Doug
On Wed, May 16, 2001 at 06:09:06PM +0530, Sireesh Chandra M, STC Chennai wrote:
> Hi All,
> We are using DB2 UDB V6.1 EE. There are more than one servers and
> the clients are connecting to all of them. In some client machines, when we
> open control center its giving 'Username/Password supplied is incorrect'.
> Hence we are unable to use control center from some clients.
> I would like to know where this is set by default since we are not
> able to use control center even once after installaion. Also, the servers
> doesnt have the default password db2admin for the userid db2admin. Is it
> anyway that the local clients are trying for combination of the default
> db2admin/db2admin?? Could this be a problem??
> Can anyone throw some info on this??Is there anyway to set the
> userid and password??
>
> Thanks and Regards
> Sireesh.
=====
To unsubscribe, send 'unsubscribe' to [EMAIL PROTECTED]
For other info (and scripts), see http://people.mn.mediaone.net/scottrmcleod
