Hi All,
I was installing DBI module on my machine where I encountered some problem
during nmake. I could not reproduce the problem.
I searched for this problem on the net, searched the FAQ but couldn't so I
am posting it to the forum. Please help me to get this solved.
Attached is the file which contains complete information regarding output of
compilation, perl -v output etc. for your refernce.
Kindly help me with your suggestion/inputs in resolving the problem.
Thanks & Regards
Sharad
<<debug.txt>>
<<debug.txt>>
1. Log of Complete build:
============================================================================================================================
C:\download\DBI-1.42>perl Makefile.PL
*** You are using a perl configured with threading enabled.
*** You should be aware that using multiple threads is
*** not recommended for production environments.
*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.
Optional modules are available from any CPAN mirror, in particular
http://search.cpan.org/
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
Creating extra DBI::PurePerl test: t/zz_01basics_pp.t
Creating extra DBI::PurePerl test: t/zz_02dbidrv_pp.t
Creating extra DBI::PurePerl test: t/zz_03handle_pp.t
Creating extra DBI::PurePerl test: t/zz_04mods_pp.t
Creating extra DBI::PurePerl test: t/zz_05thrclone_pp.t
Creating extra DBI::PurePerl test: t/zz_06attrs_pp.t
Creating extra DBI::PurePerl test: t/zz_07kids_pp.t
Creating extra DBI::PurePerl test: t/zz_08keeperr_pp.t
Creating extra DBI::PurePerl test: t/zz_09trace_pp.t
Creating extra DBI::PurePerl test: t/zz_10examp_pp.t
Creating extra DBI::PurePerl test: t/zz_15array_pp.t
Creating extra DBI::PurePerl test: t/zz_20meta_pp.t
Creating extra DBI::PurePerl test: t/zz_30subclass_pp.t
Creating extra DBI::PurePerl test: t/zz_40profile_pp.t
Creating extra DBI::PurePerl test: t/zz_41prof_dump_pp.t
Creating extra DBI::PurePerl test: t/zz_42prof_data_pp.t
Creating extra DBI::PurePerl test: t/zz_50dbm_pp.t
Creating extra DBI::PurePerl test: t/zz_60preparse_pp.t
Creating extra DBI::PurePerl test: t/zz_80proxy_pp.t
Warning: prerequisite Test::More failed to load: Can't locate Test/More.pm in @INC
(@INC contains: lib C:/Perl/lib C:/Perl/site/
at (eval 8) line 3.
I see you're using perl 5.006001 on MSWin32-x86-multi-thread, okay.
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
Windows users need to use the correct make command.
That may be nmake or dmake depending on which Perl you are using.
If using the Win32 ActiveState build then it is recommended that you
use the ppm utility to fetch and install a prebuilt DBI instead.
Writing Makefile for DBI
=============================================================================================================================
2. OUTPUT of nmake execution:
C:\download\DBI-1.42>"C:\Program Files\Microsoft Visual Studio\VC98\Bin\nmake"
Microsoft (R) Program Maintenance Utility Version 6.00.8168.0
Copyright (C) Microsoft Corp 1988-1998. All rights reserved.
rem
rem
rem
cl -c -nologo -O1 -MD -Zi -DNDEBUG -DWIN32 -D_CONSOLE -DNO_STRICT
-DHAVE_DES_FCRYPT -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DPERL_MSVCRT_READFIX
-O1 -MD -Zi -DNDEBUG -DVERSION=\"1.42\" -DXS_VERSION=\"1.42\" -IC:\Perl\lib\CORE
Perl.c
'cl' is not recognized as an internal or external command,
operable program or batch file.
NMAKE : fatal error U1077: 'cl' : return code '0x1'
Stop.
=============================================================================================================================
3. The OUTPUT of perl -V:
C:\>perl -V
Summary of my perl5 (revision 5 version 6 subversion 1) configuration:
Platform:
osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread
uname=''
config_args='undef'
hint=recommended, useposix=true, d_sigaction=undef
usethreads=undef use5005threads=undef useithreads=define usemultiplicity=define
useperlio=undef d_sfio=undef uselargefiles=undef usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
Compiler:
cc='cl', ccflags ='-nologo -O1 -MD -Zi -DNDEBUG -DWIN32 -D_CONSOLE -DNO_STRICT
-DHAVE_DES_FCRYPT -DPERL_IMPLICIT_CONTEXT -D
PLICIT_SYS -DPERL_MSVCRT_READFIX',
optimize='-O1 -MD -Zi -DNDEBUG',
cppflags='-DWIN32'
ccversion='', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=4
alignbytes=8, usemymalloc=n, prototype=define
Linker and Libraries:
ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf
-libpath:"C:\Perl\lib\CORE" -machine:x86'
libpth="C:\Program Files\Microsoft Visual Studio .NET\FrameworkSDK\Lib\"
"C:\Program Files\Microsoft Visual Studio\VC98\mfc\
:\Program Files\Microsoft Visual Studio\VC98\lib" "C:\Perl\lib\CORE"
libs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib
advapi32.lib shell32.lib ole32.lib oleaut32
etapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib version.lib odbc32.lib
odbccp32.lib msvcrt.lib
perllibs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib
comdlg32.lib advapi32.lib shell32.lib ole32.lib olea
b netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib version.lib odbc32.lib
odbccp32.lib msvcrt.lib
libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl56.lib
Dynamic Linking:
dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf
-libpath:"C:\Perl\lib\CORE" -machine:x86'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY USE_ITHREADS PERL_IMPLICIT_CONTEXT
PERL_IMPLICIT_SYS
Locally applied patches:
ActivePerl Build 635
Built under MSWin32
Compiled at Feb 4 2003 15:34:21
@INC:
C:/Perl/lib
C:/Perl/site/lib
.
=============================================================================================================================
1. Log of Complete build:
============================================================================================================================
C:\download\DBI-1.42>perl Makefile.PL
*** You are using a perl configured with threading enabled.
*** You should be aware that using multiple threads is
*** not recommended for production environments.
*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.
Optional modules are available from any CPAN mirror, in particular
http://search.cpan.org/
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
Creating extra DBI::PurePerl test: t/zz_01basics_pp.t
Creating extra DBI::PurePerl test: t/zz_02dbidrv_pp.t
Creating extra DBI::PurePerl test: t/zz_03handle_pp.t
Creating extra DBI::PurePerl test: t/zz_04mods_pp.t
Creating extra DBI::PurePerl test: t/zz_05thrclone_pp.t
Creating extra DBI::PurePerl test: t/zz_06attrs_pp.t
Creating extra DBI::PurePerl test: t/zz_07kids_pp.t
Creating extra DBI::PurePerl test: t/zz_08keeperr_pp.t
Creating extra DBI::PurePerl test: t/zz_09trace_pp.t
Creating extra DBI::PurePerl test: t/zz_10examp_pp.t
Creating extra DBI::PurePerl test: t/zz_15array_pp.t
Creating extra DBI::PurePerl test: t/zz_20meta_pp.t
Creating extra DBI::PurePerl test: t/zz_30subclass_pp.t
Creating extra DBI::PurePerl test: t/zz_40profile_pp.t
Creating extra DBI::PurePerl test: t/zz_41prof_dump_pp.t
Creating extra DBI::PurePerl test: t/zz_42prof_data_pp.t
Creating extra DBI::PurePerl test: t/zz_50dbm_pp.t
Creating extra DBI::PurePerl test: t/zz_60preparse_pp.t
Creating extra DBI::PurePerl test: t/zz_80proxy_pp.t
Warning: prerequisite Test::More failed to load: Can't locate Test/More.pm in @INC
(@INC contains: lib C:/Perl/lib C:/Perl/site/
at (eval 8) line 3.
I see you're using perl 5.006001 on MSWin32-x86-multi-thread, okay.
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
Windows users need to use the correct make command.
That may be nmake or dmake depending on which Perl you are using.
If using the Win32 ActiveState build then it is recommended that you
use the ppm utility to fetch and install a prebuilt DBI instead.
Writing Makefile for DBI
=============================================================================================================================
2. OUTPUT of nmake execution:
C:\download\DBI-1.42>"C:\Program Files\Microsoft Visual Studio\VC98\Bin\nmake"
Microsoft (R) Program Maintenance Utility Version 6.00.8168.0
Copyright (C) Microsoft Corp 1988-1998. All rights reserved.
rem
rem
rem
cl -c -nologo -O1 -MD -Zi -DNDEBUG -DWIN32 -D_CONSOLE -DNO_STRICT
-DHAVE_DES_FCRYPT -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DPERL_MSVCRT_READFIX
-O1 -MD -Zi -DNDEBUG -DVERSION=\"1.42\" -DXS_VERSION=\"1.42\" -IC:\Perl\lib\CORE
Perl.c
'cl' is not recognized as an internal or external command,
operable program or batch file.
NMAKE : fatal error U1077: 'cl' : return code '0x1'
Stop.
=============================================================================================================================
3. The OUTPUT of perl -V:
C:\>perl -V
Summary of my perl5 (revision 5 version 6 subversion 1) configuration:
Platform:
osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread
uname=''
config_args='undef'
hint=recommended, useposix=true, d_sigaction=undef
usethreads=undef use5005threads=undef useithreads=define usemultiplicity=define
useperlio=undef d_sfio=undef uselargefiles=undef usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
Compiler:
cc='cl', ccflags ='-nologo -O1 -MD -Zi -DNDEBUG -DWIN32 -D_CONSOLE -DNO_STRICT
-DHAVE_DES_FCRYPT -DPERL_IMPLICIT_CONTEXT -D
PLICIT_SYS -DPERL_MSVCRT_READFIX',
optimize='-O1 -MD -Zi -DNDEBUG',
cppflags='-DWIN32'
ccversion='', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=4
alignbytes=8, usemymalloc=n, prototype=define
Linker and Libraries:
ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf
-libpath:"C:\Perl\lib\CORE" -machine:x86'
libpth="C:\Program Files\Microsoft Visual Studio .NET\FrameworkSDK\Lib\"
"C:\Program Files\Microsoft Visual Studio\VC98\mfc\
:\Program Files\Microsoft Visual Studio\VC98\lib" "C:\Perl\lib\CORE"
libs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib
advapi32.lib shell32.lib ole32.lib oleaut32
etapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib version.lib odbc32.lib
odbccp32.lib msvcrt.lib
perllibs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib
comdlg32.lib advapi32.lib shell32.lib ole32.lib olea
b netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib version.lib odbc32.lib
odbccp32.lib msvcrt.lib
libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl56.lib
Dynamic Linking:
dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf
-libpath:"C:\Perl\lib\CORE" -machine:x86'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY USE_ITHREADS PERL_IMPLICIT_CONTEXT
PERL_IMPLICIT_SYS
Locally applied patches:
ActivePerl Build 635
Built under MSWin32
Compiled at Feb 4 2003 15:34:21
@INC:
C:/Perl/lib
C:/Perl/site/lib
.
=============================================================================================================================
