Excellent, that does it: thanks!
Paul

  -----Original Message-----
  From: Jonathan Leffler [mailto:[EMAIL PROTECTED]
  Sent: Thursday, July 07, 2005 12:01 AM
  To: [EMAIL PROTECTED]
  Cc: dbi-users
  Subject: Re: Installing DBD::File via CPAN


  Do you use 'UNINST=1' in the build options for CPAN?  If not, try it...


  On 7/6/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:

    I built this directly from source.  The older version seems to have come
when I
    installed DBI (again built from source) so it seems like the newer
version
    doesn't default to installing into the same place, perhaps?

    Paul

    Quoting "Reidy, Ron" <[EMAIL PROTECTED]>:
    > I do not believe it is a good idea to delete a module in the module
tree.
    > There are (several?) lists of modules stored somewhere in the lib
    > directory.
    >
    > I am not really sure how you have 2 different File.pm - I have only 1
under
    > the site_perl directory.
    >
    > Did you build Perl from source, or install via a RPM or binary distro?
    >
    > -----------------
    > Ron Reidy
    > Lead DBA
    > Array BioPharma, Inc.
    >
    >
    > -----Original Message-----
    > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
    > Sent: Wednesday, July 06, 2005 8:00 AM
    > To: dbi-users
    > Subject: RE: Installing DBD::File via CPAN
    >
    >
    > Hi everyone,
    >
    > After a little tracking down I realized what's happening, but I can't
quite
    >
    > pick out why.  There are two versions of DBD::File in my tree one at:
    > /db2blast/Paul/perl5.8.7/lib/site_perl/5.8.7/aix/DBD (v0.33)
    > and one at
    > /db2blast/Paul/perl5.8.7/lib/site_perl/5.8.7/DBD (v0.34)
    >
    > This was a fresh build of perl, and all modules were updated/installed
via
    > the
    > CPAN module so I wasn't expecting to get myself confused with multiple
    > versions
    > like so.  Any ideas where I may have gone wrong?  Or, for that matter,
am I
    >
    > safe just deleting File.pm from the aix subdirectory?
    >
    > Many thanks,
    > Paul
    >
    >
    > Quoting "Reidy, Ron" <[EMAIL PROTECTED] >:
    >
    > > Paul,
    > >
    > > Did you check the timestamp of the new .pm and/or .so?  Maybe the
    > internal
    > > $VERSION variable was not updated by the module author.
    > >
    > > -----------------
    > > Ron Reidy
    > > Lead DBA
    > > Array BioPharma, Inc.
    > >
    > >
    > > -----Original Message-----
    > > From: Paul Boutros [mailto: [EMAIL PROTECTED]
    > > Sent: Tuesday, July 05, 2005 10:52 AM
    > > To: dbi-users
    > > Subject: Installing DBD::File via CPAN
    > >
    > >
    > > Hello,
    > >
    > > I have a small-but-weird problem.  When I install the 0.34 release
of
    > > DBD::File via CPAN it seems to make/test/install properly but... it
just
    > > doesn't stick.  The installation seems to stay at 0.33.  I also get
when
    > I
    > > download directly and do the make/test/install myself.  Here's the
    > session
    > > to show what I mean.  Any ideas what might be going on?  This is
Perl
    > 5.8.7
    > > on AIX 5.2.0.0
    > >
    > > Paul
    > >
    > > $ perl -v
    > >
    > > This is perl, v5.8.7 built for aix
    > >
    > > Copyright 1987-2005, Larry Wall
    > >
    > > Perl may be copied only under the terms of either the Artistic
License or
    > > the
    > > GNU General Public License, which may be found in the Perl 5 source
kit.
    > >
    > > Complete documentation for Perl, including FAQ lists, should be
found on
    > > this system using `man perl' or `perldoc perl'.  If you have access
to
    > the
    > > Internet, point your browser at http://www.perl.org/, the Perl Home
Page.
    > >
    > > $ perl -MCPAN -e shell
    > > Terminal does not support AddHistory.
    > >
    > > cpan shell -- CPAN exploration and modules installation (v1.7601)
    > > ReadLine support available (try 'install Bundle::CPAN')
    > >
    > > cpan> r
    > > CPAN: Storable loaded ok
    > > Going to read /db2/dlink/.cpan/Metadata
    > >   Database was generated on Mon, 04 Jul 2005 19:58:56 GMT
    > >
    > > Package namespace         installed    latest  in CPAN file
    > > DBD::File                      0.33      0.34
    > > J/JZ/JZUCKER/DBD-File-0.34.tar.gz
    > > 118 installed modules have no parseable version number
    > >
    > > cpan> install DBD::File
    > > Running install for module DBD::File
    > > Running make for J/JZ/JZUCKER/DBD-File-0.34.tar.gz
    > > CPAN: Digest::MD5 loaded ok
    > > CPAN: Compress::Zlib loaded ok
    > > Checksum for
    > > /db2/dlink/.cpan/sources/authors/id/J/JZ/JZUCKER/DBD-
File-0.34.tar.gz ok
    > > Scanning cache /db2/dlink/.cpan/build for sizes
    > > x DBD-File-0.34
    > > x DBD-File-0.34/MANIFEST, 142 bytes, 1 media blocks.
    > > x DBD-File-0.34/META.yml, 340 bytes, 1 media blocks.
    > > x DBD-File-0.34/t
    > > x DBD-File-0.34/t/00base.t, 96 bytes, 1 media blocks.
    > > x DBD-File-0.34/Changes, 233 bytes, 1 media blocks.
    > > x DBD-File-0.34/lib
    > > x DBD-File-0.34 /lib/DBD
    > > x DBD-File-0.34/lib/DBD/File.pm, 19878 bytes, 39 media blocks.
    > > x DBD-File-0.34/README, 352 bytes, 1 media blocks.
    > > x DBD-File-0.34/Makefile.PL, 524 bytes, 2 media blocks.
    > > Removing previously used /db2/dlink/.cpan/build/DBD-File-0.34
    > >
    > >   CPAN.pm: Going to build J/JZ/JZUCKER/DBD-File-0.34.tar.gz
    > >
    > > Checking if your kit is complete...
    > > Looks good
    > > Writing Makefile for DBD::File
    > > cp lib/DBD/File.pm blib/lib/DBD/File.pm
    > > Manifying blib/man3/DBD::File.3
    > >   /usr/bin/make  -- OK
    > > Running make test
    > >         PERL_DL_NONLAZY=1 /db2blast/Paul/perl5.8.7/bin/perl
    > > "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib',
'blib/arch')"
    > > t/*.t
    > > t/00base....ok
    > > All tests successful.
    > > Files=1, Tests=1,  0 wallclock secs ( 0.03 cusr +  0.04 csys =  0.07
CPU)
    > > Target "test" is up to date.
    > >   /usr/bin/make test -- OK
    > > Running make install
    > > Writing
    > >
/db2blast/Paul/perl5.8.7/lib/site_perl/5.8.7/aix/auto/DBD/File/.packlist
    > > Appending installation info to
    > > /db2blast/Paul/perl5.8.7/lib/5.8.7/aix/perllocal.pod
    > >   /usr/bin/make install  -- OK
    > >
    > > cpan> q
    > > Terminal does not support GetHistory.
    > > Lockfile removed.
    > > $ perl -MDBD::File -e 'print $DBD::File::VERSION'
    > > 0.33$
    > > $ perl -MCPAN -e shell
    > > Terminal does not support AddHistory.
    > >
    > > cpan shell -- CPAN exploration and modules installation (v1.7601)
    > > ReadLine support available (try 'install Bundle::CPAN')
    > >
    > > cpan> r
    > > CPAN: Storable loaded ok
    > > Going to read /db2/dlink/.cpan/Metadata
    > >   Database was generated on Mon, 04 Jul 2005 19:58:56 GMT
    > >
    > > Package namespace         installed    latest  in CPAN file
    > > DBD::File                      0.33      0.34
    > > J/JZ/JZUCKER/DBD-File-0.34.tar.gz
    > > 118 installed modules have no parseable version number
    > >
    > > cpan> q
    > > Terminal does not support GetHistory.
    > > Lockfile removed.
    > > $ perl -v
    > >
    > > This is perl, v5.8.7 built for aix
    > >
    > > Copyright 1987-2005, Larry Wall
    > >
    > > Perl may be copied only under the terms of either the Artistic
License or
    > > the
    > > GNU General Public License, which may be found in the Perl 5 source
kit.
    > >
    > > Complete documentation for Perl, including FAQ lists, should be
found on
    > > this system using `man perl' or `perldoc perl'.  If you have access
to
    > the
    > > Internet, point your browser at http://www.perl.org/, the Perl Home
Page.
    > >
    > > $ oslevel
    > > 5.2.0.0
    > >
    > >
    > > This electronic message transmission is a PRIVATE communication
which
    > > contains
    > > information which may be confidential or privileged. The information
is
    > > intended
    > > to be for the use of the individual or entity named above. If you
are not
    > the
    > >
    > > intended recipient, please be aware that any disclosure, copying,
    > > distribution
    > > or use of the contents of this information is prohibited. Please
notify
    > the
    > > sender  of the delivery error by replying to this message, or notify
us
    > by
    > > telephone (877-633-2436, ext. 0), and then delete it from your
system.
    > >
    > >
    >
    >
    >
    > This electronic message transmission is a PRIVATE communication which
    > contains
    > information which may be confidential or privileged. The information
is
    > intended
    > to be for the use of the individual or entity named above. If you are
not the
    >
    > intended recipient, please be aware that any disclosure, copying,
    > distribution
    > or use of the contents of this information is prohibited. Please
notify the
    > sender  of the delivery error by replying to this message, or notify
us by
    > telephone (877-633-2436, ext. 0), and then delete it from your system.
    >
    >






  --
  Jonathan Leffler <[EMAIL PROTECTED]>  #include <disclaimer.h>
  Guardian of DBD::Informix - v2005.01 - http://dbi.perl.org
  "I don't suffer from insanity - I enjoy every minute of it."

Reply via email to