Hallo,
thank you for the patch and your helpful information.
I had some problems to get it from your link via svn, because we use a proxy.
After a lot of trouble I've got it. Therefore my late response.
But now to the patch you made available for me.
I could execute the perl Makefile.pl without significant problems.
However the make itself brings an error you can see below.
[/tmp/dbd]$ make
cp Oracle.pm blib/lib/DBD/Oracle.pm
cp oraperl.ph blib/lib/oraperl.ph
cp dbdimp.h blib/arch/auto/DBD/Oracle/dbdimp.h
cp ocitrace.h blib/arch/auto/DBD/Oracle/ocitrace.h
cp Oraperl.pm blib/lib/Oraperl.pm
cp Oracle.h blib/arch/auto/DBD/Oracle/Oracle.h
cp lib/DBD/Oracle/Object.pm blib/lib/DBD/Oracle/Object.pm
cp mk.pm blib/arch/auto/DBD/Oracle/mk.pm
cp lib/DBD/Oracle/GetInfo.pm blib/lib/DBD/Oracle/GetInfo.pm
>>Erstellt wird: Weiß nicht, wie
>>/opt/perl64/lib/5.10.1/PA-RISC2.0-LP64/CORE/thrdvar.h mit 'make' erstellt
>>werden soll.. Stopp.
That means approximately in english
>>Dont' know how /opt/perl64/lib/5.10.1/PA-RISC2.0-LP64/CORE/thrdvar.h should
>>be built with 'make'
There is no /opt/perl64/lib/5.10.1/PA-RISC2.0-LP64/CORE/thrdvar.h on that
Location.
What's the reason for that?
Is it perl that has to provide this library-file and because perl isn't built
with the correct options for dbd this file is missing?
But if so why didn't DBD-Oracle 1.24b reports the same problem?
Have you any ideas to this?
Meanwhile I took the DBD-Oracle 1.24b and installed it to perl as you suggested
because we don't use embedded objects.
It works without problems so far.
I hope this won't bring some trouble to me in the future.
If you can give me another advice I will make a futher test to install a fully
working DBD::Oracle.
Kind regards
Jürgen Großkopf
________________________________
Von: John Scoles [mailto:byter...@hotmail.com]
Gesendet: Montag, 12. Juli 2010 15:55
An: Großkopf, Jürgen (OFDKA); dbi-users@perl.org
Betreff: RE: DBD-Oracle 1.24b reports ORA-24334 in t/58object.t
Unless you are going to use an oracle embeded type (table, Object, Varray) I
would not worry about this error.
I think I applied that patch to the Trunk of DBD::ORacle a while back.
give the code here a try to see if it fixes the error
http://svn.perl.org/modules/dbd-oracle/trunk
cheers
John Scoles
> Subject: DBD-Oracle 1.24b reports ORA-24334 in t/58object.t
> Date: Fri, 9 Jul 2010 15:29:45 +0200
> From: juergen.grossk...@ofdka.bwl.de
> To: dbi-users@perl.org
>
> Hallo,
>
> while executing a "make test" with "DBD-Oracle 1.24b" I got an error on my HP
> box.
> I think, that the same problem was reported in the thread "DBD-Oracle 1.24a
> reports ORA-24334 in t/58object.t"
> by Timothy Everett on his SUN machine.
>
> There is mentioned, that the problem was solved by a patch.
> But unfortunately I can't find that patch or a description in this threat how
> to get rid of this problem.
>
> Can anybody help me?
>
> My Environment-data:
> - perl 5.10.1 64-bit
> - gcc-Version 4.4.3 (GCC)
> - HP-UX B.11.11 U 9000/800 PA-RISC 2.0
> - Oracle 10.2.0.4
>
> [/home/perl/.cpan/build/DBD-Oracle-1.24-U4bVzI]$ perl -V
> Summary of my perl5 (revision 5 version 10 subversion 1) configuration:
>
> Platform:
> osname=hpux, osvers=11.11, archname=PA-RISC2.0-LP64
> uname='hp-ux r3 b.11.11 u 9000800 1909236376 unlimited-user license '
> config_args='-Uversiononly -Dinc_version_list=none -Duseperlio -Dcc=gcc
> -Duse64bitall -des'
> hint=recommended, useposix=true, d_sigaction=define
> useithreads=undef, usemultiplicity=undef
> useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
> use64bitint=define, use64bitall=define, uselongdouble=undef
> usemymalloc=n, bincompat5005=undef
> Compiler:
> cc='gcc64', ccflags ='-mpa-risc-2-0 -DDEBUGGING -DPERL_DONT_CREATE_GVSV
> -D_HPUX_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe
> -I/usr/local/pa20_64/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
> optimize='-g -O',
> cppflags='-mpa-risc-2-0 -DDEBUGGING -DPERL_DONT_CREATE_GVSV -D_HPUX_SOURCE
> -mpa-risc-2-0 -DDEBUGGING -DPERL_DONT_CREATE_GVSV -D_HPUX_SOURCE -DDEBUGGING
> -fno-strict-aliasing -pipe -I/usr/local/pa20_64/include'
> ccversion='', gccversion='3.4.6', gccosandvers='hpux11.11'
> intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=87654321
> d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
> ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
> alignbytes=8, prototype=define
> Linker and Libraries:
> ld='/usr/bin/ld', ldflags ='-L/usr/local/pa20_64/lib -L/usr/local/lib/pa20_64
> -L/usr/lib/pa20_64 -L/usr/local/lib -L/pro/local/lib -L/lib/pa20_64'
> libpth=/usr/local/pa20_64/lib /lib/pa20_64 /lib /usr/lib /usr/ccs/lib
> /usr/local/lib
> libs=-lcl -lpthread -lnsl -lnm -lgdbm -ldb -ldl -ldld -lm -lsec -lc
> perllibs=-lcl -lpthread -lnsl -lnm -ldl -ldld -lm -lsec -lc
> libc=/lib/pa20_64/libc.sl, so=sl, useshrplib=false, libperl=libperl.a
> gnulibc_version=''
> Dynamic Linking:
> dlsrc=dl_hpux.xs, dlext=sl, d_dlsymun=undef, ccdlflags='-Wl,-E
> -Wl,-B,deferred '
> cccdlflags='-fPIC', lddlflags='-b -L/usr/local/pa20_64/lib
> -L/usr/local/lib/pa20_64 -L/usr/lib/pa20_64 -L/usr/local/lib -L/pro/local/lib
> -L/lib/pa20_64'
>
>
> Characteristics of this binary (from libperl):
> Compile-time options: DEBUGGING PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
> USE_64_BIT_ALL USE_64_BIT_INT USE_LARGE_FILES
> USE_PERLIO
> Built under hpux
> Compiled at Aug 24 2009 13:27:32
> @INC:
> /opt/perl64/lib/5.10.1/PA-RISC2.0-LP64
> /opt/perl64/lib/5.10.1
> /opt/perl64/lib/site_perl/5.10.1/PA-RISC2.0-LP64
> /opt/perl64/lib/site_perl/5.10.1
> .
>
>
> [/home/perl/.cpan/build/DBD-Oracle-1.24-U4bVzI]$ make realclean
> rm -f \
> blib/script/ora_explain
> rm -f \
> *.a core \
> core.[0-9] blib/arch/auto/DBD/Oracle/extralibs.all \
> core.[0-9][0-9] Oracle.bso \
> pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
> Oracle.x Oracle.bs \
> perl tmon.out \
> *.o pm_to_blib \
> blib/arch/auto/DBD/Oracle/extralibs.ld blibdirs.ts \
> Oracle.c core.[0-9][0-9][0-9][0-9][0-9] \
> *perl.core core.*perl.*.? \
> Makefile.aperl perl \
> Oracle.def core.[0-9][0-9][0-9] \
> mon.out libOracle.def \
> perlmain.c perl.exe \
> so_locations Oracle.exp
> rm -rf \
> ora_explain dll.base \
> DBD_ORA_OBJ.* Oracle.xsi \
> dll.exp libOracle.def \
> sqlnet.log blib \
> mk.pm xstmp.c
> mv Makefile Makefile.old > /dev/null 2>&1
> rm -f \
> Oracle.o dbdimp.o oci8.o Makefile.old \
> Makefile
> rm -rf \
> DBD-Oracle-1.24
>
> [/home/perl/.cpan/build/DBD-Oracle-1.24-U4bVzI]$ perl Makefile.PL
> Using DBI 1.609 (for perl 5.010001 on PA-RISC2.0-LP64) installed in
> /opt/perl64/lib/site_perl/5.10.1/PA-RISC2.0-LP64/auto/DBI/
>
> Configuring DBD::Oracle for perl 5.010001 on hpux (PA-RISC2.0-LP64)
>
> Remember to actually *READ* the README file! Especially if you have any
> problems.
>
> Installing on a hpux, Ver#11.11
> Using Oracle in /opt/oracle/product/oracle10.2
> DEFINE _SQLPLUS_RELEASE = "1002000400" (CHAR)
> Oracle version 10.2.0.4 (10.2)
> Found /opt/oracle/product/oracle10.2/rdbms/demo/demo_rdbms.mk
> Found /opt/oracle/product/oracle10.2/rdbms/demo/demo_rdbms64.mk
> Found /opt/oracle/product/oracle10.2/rdbms/lib/ins_rdbms.mk
> Found /opt/oracle/product/oracle10.2/precomp/demo/proc/demo_proc.mk
> Using /opt/oracle/product/oracle10.2/rdbms/demo/demo_rdbms.mk
> Your LD_LIBRARY_PATH/SHLIB_PATH env var is set to
> '/opt/oracle/product/oracle10.2/lib:/opt/omni/lib:/opt/oracle/product/oracle10.2/lib:/opt/omni/lib'
> Reading /opt/oracle/product/oracle10.2/rdbms/demo/demo_rdbms.mk
> Reading /opt/oracle/product/oracle10.2/rdbms/lib/env_rdbms.mk
>
> Attempting to discover Oracle OCI build rules
> gcc64 -O -c DBD_ORA_OBJ.c
> by executing: [make -f
> /opt/oracle/product/oracle10.2/rdbms/demo/demo_rdbms.mk build ECHODO=echo
> ECHO=echo GENCLNTSH='echo genclntsh' CC=true OPTIMIZE= CCFLAGS=
> EXE=DBD_ORA_EXE OBJS=DBD_ORA_OBJ.o]
> Oracle oci build command:
> [ true -Wl,+s -Wl,+n +DA2.0W +DS2.0 -o build
> -L/opt/oracle/product/oracle10.2/rdbms/lib/
> -L/opt/oracle/product/oracle10.2/lib/ -o DBD_ORA_EXE DBD_ORA_OBJ.o -lclntsh
> `cat /opt/oracle/product/oracle10.2/lib/ldflags` `cat
> /opt/oracle/product/oracle10.2/lib/sysliblist` -lm ]
>
> WARNING: Stripped `cat /opt/oracle/product/oracle10.2/lib/sysliblist`
> from link command, because it contains libraries not
> compiled with +z or +Z (PIC) causing link to fail.
> Furthermore, we should have already grabbed these libraries
> Found header files in /opt/oracle/product/oracle10.2/rdbms/public.
> WARNING: If you have trouble, see README.hpux.txt...
> you may have to build your own perl, or go hunting for libraries
> WARNING: If you have trouble, try perl Makefile.PL -l
>
> Checking for functioning wait.ph
>
>
> System: perl5.010001 hp-ux r3 b.11.11 u 9000800 1909236376 unlimited-user
> license
> Compiler: gcc64 -g -O -mpa-risc-2-0 -DDEBUGGING -DPERL_DONT_CREATE_GVSV
> -D_HPUX_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe
> -I/usr/local/pa20_64/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
> Linker: /usr/bin/ld
> Sysliblist: -lrt -lpthread -l:libnss_dns.1 -lnsl
> Oracle makefiles would have used these definitions but we override them:
> CC: cc
> CFLAGS: $(GFLAG) $(OPTIMIZE) $(CDEBUG) $(CCFLAGS) $(PFLAGS)\
> $(SHARED_CFLAG) $(USRFLAGS)
> [$(GFLAG) $(OPTIMIZE) $(CDEBUG) +DA2.0W +DS2.0 -DSS_64BIT_SERVER
> -I/opt/oracle/product/oracle10.2/rdbms/demo
> -I/opt/oracle/product/oracle10.2/rdbms/public
> -I/opt/oracle/product/oracle10.2/plsql/public
> -I/opt/oracle/product/oracle10.2/network/public $(SPFLAGS) $(LPFLAGS)
> $(SHARED_CFLAG) $(USRFLAGS)]
> LDFLAGS: -Wl,+s -Wl,+n +DA2.0W +DS2.0 -o $@ -L$(PRODLIBHOME) -L$(LIBHOME)
> [-Wl,+s -Wl,+n +DA2.0W +DS2.0 -o $@
> -L/opt/oracle/product/oracle10.2/rdbms/lib/ -L$(LIBHOME)]
> Linking with OTHERLDFLAGS = +s +n -L/opt/oracle/product/oracle10.2/rdbms/lib/
> -L/opt/oracle/product/oracle10.2/lib/ -lclntsh `cat
> /opt/oracle/product/oracle10.2/lib/ldflags` -lm -lqsmashr [from 'build' rule]
>
>
> WARNING: If you have problems you may need to rebuild perl with threading
> enabled.
> Checking if your kit is complete...
> Looks good
> LD_RUN_PATH=/opt/oracle/product/oracle10.2/lib:/opt/oracle/product/oracle10.2/rdbms/lib
> Using DBD::Oracle 1.24.
> Using DBD::Oracle 1.24.
> Using DBI 1.609 (for perl 5.010001 on PA-RISC2.0-LP64) installed in
> /opt/perl64/lib/site_perl/5.10.1/PA-RISC2.0-LP64/auto/DBI/
> Writing Makefile for DBD::Oracle
>
> *** If you have problems...
> read all the log printed above, and the README and README.help.txt files.
> (Of course, you have read README by now anyway, haven't you?)
>
>
> [/home/perl/.cpan/build/DBD-Oracle-1.24-U4bVzI]$ make
> cp Oracle.pm blib/lib/DBD/Oracle.pm
> cp oraperl.ph blib/lib/oraperl.ph
> cp dbdimp.h blib/arch/auto/DBD/Oracle/dbdimp.h
> cp ocitrace.h blib/arch/auto/DBD/Oracle/ocitrace.h
> cp Oraperl.pm blib/lib/Oraperl.pm
> cp Oracle.h blib/arch/auto/DBD/Oracle/Oracle.h
> cp lib/DBD/Oracle/Object.pm blib/lib/DBD/Oracle/Object.pm
> cp mk.pm blib/arch/auto/DBD/Oracle/mk.pm
> cp lib/DBD/Oracle/GetInfo.pm blib/lib/DBD/Oracle/GetInfo.pm
> /usr/bin/perl -p -e "s/~DRIVER~/Oracle/g"
> /opt/perl64/lib/site_perl/5.10.1/PA-RISC2.0-LP64/auto/DBI/Driver.xst >
> Oracle.xsi
> /usr/bin/perl /opt/perl64/lib/5.10.1/ExtUtils/xsubpp -typemap
> /opt/perl64/lib/5.10.1/ExtUtils/typemap -typemap typemap Oracle.xs >
> Oracle.xsc && mv Oracle.xsc Oracle.c
> gcc64 -c -I/opt/oracle/product/oracle10.2/rdbms/public
> -I/opt/oracle/product/oracle10.2/rdbms/demo
> -I/opt/oracle/product/oracle10.2/rdbms/public
> -I/opt/oracle/product/oracle10.2/plsql/public
> -I/opt/oracle/product/oracle10.2/network/public
> -I/opt/perl64/lib/site_perl/5.10.1/PA-RISC2.0-LP64/auto/DBI -mpa-risc-2-0
> -DDEBUGGING -DPERL_DONT_CREATE_GVSV -D_HPUX_SOURCE -DDEBUGGING
> -fno-strict-aliasing -pipe -I/usr/local/pa20_64/include -D_LARGEFILE_SOURCE
> -D_FILE_OFFSET_BITS=64 -g -O -DVERSION=\"1.24\" -DXS_VERSION=\"1.24\" -fPIC
> "-I/opt/perl64/lib/5.10.1/PA-RISC2.0-LP64/CORE" -Wall -Wno-comment
> -DUTF8_SUPPORT -DNEW_OCI_INIT -DORA_OCI_VERSION=\"10.2.0.4\" Oracle.c
> gcc64 -c -I/opt/oracle/product/oracle10.2/rdbms/public
> -I/opt/oracle/product/oracle10.2/rdbms/demo
> -I/opt/oracle/product/oracle10.2/rdbms/public
> -I/opt/oracle/product/oracle10.2/plsql/public
> -I/opt/oracle/product/oracle10.2/network/public
> -I/opt/perl64/lib/site_perl/5.10.1/PA-RISC2.0-LP64/auto/DBI -mpa-risc-2-0
> -DDEBUGGING -DPERL_DONT_CREATE_GVSV -D_HPUX_SOURCE -DDEBUGGING
> -fno-strict-aliasing -pipe -I/usr/local/pa20_64/include -D_LARGEFILE_SOURCE
> -D_FILE_OFFSET_BITS=64 -g -O -DVERSION=\"1.24\" -DXS_VERSION=\"1.24\" -fPIC
> "-I/opt/perl64/lib/5.10.1/PA-RISC2.0-LP64/CORE" -Wall -Wno-comment
> -DUTF8_SUPPORT -DNEW_OCI_INIT -DORA_OCI_VERSION=\"10.2.0.4\" dbdimp.c
> gcc64 -c -I/opt/oracle/product/oracle10.2/rdbms/public
> -I/opt/oracle/product/oracle10.2/rdbms/demo
> -I/opt/oracle/product/oracle10.2/rdbms/public
> -I/opt/oracle/product/oracle10.2/plsql/public
> -I/opt/oracle/product/oracle10.2/network/public
> -I/opt/perl64/lib/site_perl/5.10.1/PA-RISC2.0-LP64/auto/DBI -mpa-risc-2-0
> -DDEBUGGING -DPERL_DONT_CREATE_GVSV -D_HPUX_SOURCE -DDEBUGGING
> -fno-strict-aliasing -pipe -I/usr/local/pa20_64/include -D_LARGEFILE_SOURCE
> -D_FILE_OFFSET_BITS=64 -g -O -DVERSION=\"1.24\" -DXS_VERSION=\"1.24\" -fPIC
> "-I/opt/perl64/lib/5.10.1/PA-RISC2.0-LP64/CORE" -Wall -Wno-comment
> -DUTF8_SUPPORT -DNEW_OCI_INIT -DORA_OCI_VERSION=\"10.2.0.4\" oci8.c
> Running Mkbootstrap for DBD::Oracle ()
> chmod 644 Oracle.bs
> rm -f blib/arch/auto/DBD/Oracle/Oracle.sl
> LD_RUN_PATH="/opt/oracle/product/oracle10.2/lib:/opt/oracle/product/oracle10.2/rdbms/lib"
> /usr/bin/ld -b -L/usr/local/pa20_64/lib -L/usr/local/lib/pa20_64
> -L/usr/lib/pa20_64 -L/usr/local/lib -L/pro/local/lib -L/lib/pa20_64 Oracle.o
> dbdimp.o oci8.o +s +n -L/opt/oracle/product/oracle10.2/rdbms/lib/
> -L/opt/oracle/product/oracle10.2/lib/ -lclntsh `cat
> /opt/oracle/product/oracle10.2/lib/ldflags` -lm -lqsmashr -o
> blib/arch/auto/DBD/Oracle/Oracle.sl \
> \
>
> Warning: Some debug info sections were missing.
> PXDB aborted.
> chmod 755 blib/arch/auto/DBD/Oracle/Oracle.sl
> cp Oracle.bs blib/arch/auto/DBD/Oracle/Oracle.bs
> chmod 644 blib/arch/auto/DBD/Oracle/Oracle.bs
> /usr/bin/perl "-Iblib/arch" "-Iblib/lib" ora_explain.PL ora_explain
> Extracted ora_explain from ora_explain.PL with variable substitutions.
> cp ora_explain blib/script/ora_explain
> /usr/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/ora_explain
> Manifying blib/man1/ora_explain.1
> Manifying blib/man3/DBD::Oracle.3
> Manifying blib/man3/DBD::Oraperl.3
>
>
> [/home/perl/.cpan/build/DBD-Oracle-1.24-U4bVzI]$ make test
> rm -f blib/arch/auto/DBD/Oracle/Oracle.sl
> LD_RUN_PATH="/opt/oracle/product/oracle10.2/lib:/opt/oracle/product/oracle10.2/rdbms/lib"
> /usr/bin/ld -b -L/usr/local/pa20_64/lib -L/usr/local/lib/pa20_64
> -L/usr/lib/pa20_64 -L/usr/local/lib -L/pro/local/lib -L/lib/pa20_64 Oracle.o
> dbdimp.o oci8.o +s +n -L/opt/oracle/product/oracle10.2/rdbms/lib/
> -L/opt/oracle/product/oracle10.2/lib/ -lclntsh `cat
> /opt/oracle/product/oracle10.2/lib/ldflags` -lm -lqsmashr -o
> blib/arch/auto/DBD/Oracle/Oracle.sl \
> \
>
> Warning: Some debug info sections were missing.
> PXDB aborted.
> chmod 755 blib/arch/auto/DBD/Oracle/Oracle.sl
> cp ora_explain blib/script/ora_explain
> /usr/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/ora_explain
> PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e"
> "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
> t/01base.t .............. # Test loading DBI, DBD::Oracle and version
> t/01base.t .............. ok
> t/10general.t ........... ok
> t/12impdata.t ........... ok
> t/14threads.t ........... skipped: this hpux perl 5.010001 not configured to
> support iThreads
> t/15nls.t ............... ok
> t/20select.t ............ ok
> t/21nchar.t ............. ok
> t/22nchar_al32utf8.t .... ok
> t/22nchar_utf8.t ........ ok
> t/23wide_db.t ........... skipped: Database character set is not Unicode
> t/23wide_db_8bit.t ...... skipped: Database character set is not Unicode
> t/23wide_db_al32utf8.t .. skipped: Database character set is not Unicode
> t/24implicit_utf8.t ..... ok
> t/25plsql.t ............. ok
> t/26exe_array.t ......... ok
> t/28array_bind.t ........ ok
> t/30long.t .............. ok
> t/31lob.t ............... ok
> t/31lob_extended.t ...... ok
> t/32xmltype.t ........... ok
> t/34pres_lobs.t ......... ok
> t/40ph_type.t ........... 1/19 Placeholder behaviour for ora_type=1 VARCHAR2
> (the default) varies with Oracle version.
> Oracle 7 didn't strip trailing spaces, Oracle 8 did, until 9.2.x
> Your system doesn't. If that seems odd, let us know.
> t/40ph_type.t ........... ok
> t/50cursor.t ............ ok
> t/51scroll.t ............ ok
> t/55nested.t ............ ok
> t/56embbeded.t .......... ok
> t/58object.t ............ 1/51 DBD::Oracle::db prepare failed: ORA-24334:
> Kein Deskriptor für diese Position (DBD ERROR: OCIParamGet) [for Statement
> "select * from dbd_test__obj_table order by id"] at t/58object.t line 116.
> t/58object.t ............ Dubious, test returned 6 (wstat 1536, 0x600)
> Failed 46/51 subtests
> t/60reauth.t ............ skipped: ORACLE_USERID_2 not defined.
> t/70meta.t .............. ok
> t/80ora_charset.t ....... ok
>
> Test Summary Report
> -------------------
> t/58object.t (Wstat: 1536 Tests: 5 Failed: 0)
> Non-zero exit status: 6
> Parse errors: Bad plan. You planned 51 tests but ran 5.
> Files=30, Tests=2081, 30 wallclock secs ( 1.03 usr 0.22 sys + 22.76 cusr 2.11
> csys = 26.12 CPU)
> Result: FAIL
> Failed 1/30 test programs. 0/2081 subtests failed.
> *** Fehlerrückkehrcode 255
>
> Stopp.
>
>
> [/home/perl/.cpan/build/DBD-Oracle-1.24-U4bVzI]$ perl -Mblib t/58object.t
> 1..51
> ok 1 - use DBI;
> ok 2 - ora_objects flag is set to 1
> ok 3 - ora_objects flag is set to 0
> ok 4 - The object isa DBI::db
> ok 5 - Fetch current schema name
> DBD::Oracle::db prepare failed: ORA-24334: Kein Deskriptor für diese Position
> (DBD ERROR: OCIParamGet) [for Statement "select * from dbd_test__obj_table
> order by id"] at t/58object.t line 116.
>
>
> Thanks in advance for helping me.
>
> Kind regards
>
> Jürgen Großkopf
________________________________
Enter for a chance to get your town photo on Bing.ca! Submit a Photo Now!
<http://go.microsoft.com/?linkid=9734379>
