On 08/10/10 15:25, Hatala, Michael wrote: > I don't have the prove command with this perl 5.8.8 64bit release. I'm > assuming it's a byproduct of the perl installation(?)
It is in Test::Harness which you already have but perhaps not new enough. On my Linux system it is not in the same place as the perl binary - perl binary is in /usr/bin and prove is in /usr/local/bin. Martin -- Martin J. Evans Easysoft Limited http://www.easysoft.com > -----Original Message----- > From: Martin J. Evans [mailto:martin.ev...@easysoft.com] > Sent: Friday, October 08, 2010 10:06 AM > To: Hatala, Michael > Cc: Jens Rehsack; dbi-users@perl.org > Subject: Re: FW: DBI 1.6.15 problem on AIX 6.1 with perl 5.8.8 64bit > > On 08/10/10 14:06, Hatala, Michael wrote: >> Jens, thanks for the promt response. It apperas that the command you > gave me just hangs, never completes without a kill, but here is the > output. >> >> perl -Mblib -d t/51dbm_file.t >> >> Loading DB routines from perl5db.pl version 1.28 Editor support >> available. >> >> Enter h or `h h' for help, or `man perldebug' for more help. >> >> main::(t/51dbm_file.t:2): $| = 1; >> DB<1> c > >> ok 1 - drop table >> ok 2 - FRED.dir exists >> ok 3 - fred.dir exists >> >> Thanks, Mike Hatala > > Have you got the prove command? If so run > > prove -vb t/51dbm_file.t > > it should give better output. > > Martin > -- > Martin J. Evans > Easysoft Limited > http://www.easysoft.com > >> -----Original Message----- >> From: Jens Rehsack [mailto:rehs...@googlemail.com] >> Sent: Friday, October 08, 2010 3:36 AM >> To: Hatala, Michael >> Cc: dbi-users@perl.org >> Subject: Re: FW: DBI 1.6.15 problem on AIX 6.1 with perl 5.8.8 64bit >> >> 2010/10/8 Hatala, Michael <mhat...@nemours.org>: >>> Well I can't send a zip so here is my error in the tests and the perl > >>> -V. I'm pretty much stuck at this point and need some direction. >>> >>> t/zvxgnp_51dbm_file.t ...... >>> ok 1 - drop table >>> ok 2 - FRED.dir exists >>> ok 3 - fred.dir exists >>> Dubious, test returned -1 (wstat 139, 0x8b) All 3 subtests passed >>> >>> ... >>> >>> Test Summary Report >>> ------------------- >>> t/50dbm_simple.t (Wstat: 139 Tests: 12 Failed: 0) >>> Non-zero exit status: -1 >>> Parse errors: No plan found in TAP output t/51dbm_file.t >>> (Wstat: 139 Tests: 3 Failed: 0) >>> Non-zero exit status: -1 >>> Parse errors: No plan found in TAP output >>> >>> # perl -V >>> Summary of my perl5 (revision 5 version 8 subversion 8) > configuration: >>> Platform: >>> osname=aix, osvers=5.3.0.0, archname=aix-thread-multi-64all >>> uname='aix akash79 3 5 00011a85d600 ' >>> config_args='-desr -Dinstallprefix=/usr/opt/perl5 >>> -Dprefix=/usr/opt/perl5 -Dcc=xlc_r -Duseshrplib -Dusethreads' >>> hint=recommended, useposix=true, d_sigaction=define >>> usethreads=define use5005threads=undef useithreads=define >>> usemultiplicity=define >>> useperlio=define d_sfio=undef uselargefiles=define usesocks=undef >>> use64bitint=define use64bitall=define uselongdouble=undef >>> usemymalloc=n, bincompat5005=undef >>> Compiler: >>> cc='cc_r', ccflags ='-D_ALL_SOURCE -D_ANSI_C_SOURCE >>> -D_POSIX_SOURCE >>> -qmaxmem=-1 -qnoansialias -DUSE_NATIVE_DLOPEN -DNEED_PTHREAD_INIT >>> -q64 -DUS E_64_BIT_ALL -q64', >>> optimize='-O', >>> cppflags='-D_ALL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE >>> -qmaxmem=-1 -qnoansialias -DUSE_NATIVE_DLOPEN -DNEED_PTHREAD_INIT' >>> ccversion='9.0.0.2', gccversion='', gccosandvers='' >>> intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=87654321 >>> d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8 >>> ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', >>> lseeksize=8 >>> alignbytes=8, prototype=define >>> Linker and Libraries: >>> ld='ld', ldflags ='-brtl -bdynamic -b64' >>> libpth=/lib /usr/lib /usr/ccs/lib >>> libs=-lbind -lnsl -lgdbm -ldbm -ldb -ldl -lld -lm -lcrypt >>> -lpthreads -lc -lbsd >>> perllibs=-lbind -lnsl -ldl -lld -lm -lcrypt -lpthreads -lc -lbsd >>> libc=, so=a, useshrplib=true, libperl=libperl.a >>> gnulibc_version='' >>> Dynamic Linking: >>> dlsrc=dl_aix.xs, dlext=so, d_dlsymun=undef, ccdlflags=' >>> -bE:/usr/opt/perl5/lib64/5.8.8/aix-thread-multi-64all/CORE/perl.exp' >>> cccdlflags=' ', lddlflags='-b64 -bhalt:4 -bexpall -G -bnoentry >>> -lpthreads -lc' >>> >>> >>> Characteristics of this binary (from libperl): >>> Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT >>> PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT >>> USE_ITHREADS USE_LARGE_FILES USE_PERLIO >>> USE_REENTRANT_API Built under aix Compiled >>> at Jun 3 2009 12:34:41 >>> @INC: >>> /usr/opt/perl5/lib64/5.8.8/aix-thread-multi-64all >>> /usr/opt/perl5/lib64/5.8.8 >>> /usr/opt/perl5/lib64/site_perl/5.8.8/aix-thread-multi-64all >>> /usr/opt/perl5/lib64/site_perl/5.8.8 >>> /usr/opt/perl5/lib64/site_perl >>> >>> -----Original Message----- >>> From: Hatala, Michael >>> Sent: Thursday, October 07, 2010 6:07 PM >>> To: 'dbi-users@perl.org' >>> Subject: DBI 1.6.15 problem on AIX 6.1 with perl 5.8.8 64bit >>> >>> I'm getting many >>> >>> 'Dubious, test returned -1 (wstat 139, 0x8b)' errors >>> >>> when running the 'make test'. I have attached all of the appropriate >>> files. >>> >>> Any help would be appreciated. >> >> Try a perl -Mblib -d t/51dbm_file.t, type 'c' at the debugger prompt > and see what fails (usually you'll see much more in debugger than in > normal output). >> >> I can't reproduce on an AIX 6.1 32-bit, gcc (except the initial error > of to low Test::More installed, which causes nearly all tests fail at > the first "ok()"). >> >> Jens
