Hi,
Your TRACE_VERBOSE is set to 1 which should throw debug info to sterr or
stdout.. Somehow the pop does this to the stream. This will be fixed later.
Best regards,
Eelco
On 12-07-2002 00:43, "eric" <[EMAIL PROTECTED]> wrote:
> It appears that dbmail-pop3d is sending its log stream to the client, instead
> of to the log file.
>
> Tested with current CVS, and TRACE_LEVEL = 5, the following transcript was
> generated. I'm pretty certain that the debugging output is not a valid pop3
> response.
>
> [EMAIL PROTECTED]:/etc/postfix$ telnet 127.0.0.1 110
> Trying 127.0.0.1...
> Connected to 127.0.0.1.
> Escape character is '^]'.
> +OK DBMAIL pop3 server ready <[EMAIL PROTECTED]>
> handle_client(): setting timeout timer at 300 seconds
> user [EMAIL PROTECTED]
> pop3(): incoming buffer: [user [EMAIL PROTECTED]
> pop3(): command issued :cmd [user], value
> [EMAIL PROTECTED]
>
> pop3(): command looked up as commandtype 1
> +OK Password required for [EMAIL PROTECTED]
> pass password
> pop3(): incoming buffer: [pass password]
> pop3(): command issued :cmd [pass], value password]
>
> pop3(): command looked up as commandtype 2
> __auth_query(): connection ok
> __auth_query(): executing query [SELECT user_idnr, passwd, encryption_type
> FROM users WHERE userid = '[EMAIL PROTECTED]']
> auth_validate(): validating using cleartext passwords
> __auth_query(): connection ok
> __auth_query(): executing query [UPDATE users SET last_login = '2002-07-11
> 15:27:26' WHERE user_idnr = 2::bigint]
> pop3(): validation ok, creating session
> db_query(): executing query [SELECT mailbox_idnr FROM mailboxes WHERE
> lower(name) = lower('INBOX') AND owner_idnr=2::bigint]
> db_query(): executing query [SELECT * FROM messages WHERE
> mailbox_idnr=2::bigint AND status<002 AND unique_id!='' order by status ASC]
> db_createsession(): adding items to list
> db_createsession(): adding succesfull
> +OK [EMAIL PROTECTED] has 1 messages (153 octets)
> pop3(): user [EMAIL PROTECTED] logged in [messages=1,
> octets=153]
> quit
> pop3(): incoming buffer: [quit]
> pop3(): command looked up as commandtype 0
> +OK see ya later
> handle_client(): user [EMAIL PROTECTED] logging out
> [message=1, octets=153]
> Connection closed by foreign host.
>
>
> After setting TRACE_LEVEL to 0 and restarting the daemon, I get:
>
> [EMAIL PROTECTED]:/etc/postfix$ telnet 127.0.0.1 110
> Trying 127.0.0.1...
> Connected to 127.0.0.1.
> Escape character is '^]'.
> +OK DBMAIL pop3 server ready <[EMAIL PROTECTED]>
> user [EMAIL PROTECTED]
> +OK Password required for [EMAIL PROTECTED]
> pass password
> +OK [EMAIL PROTECTED] has 1 messages (153 octets)
> list
> +OK 1 messages (153 octets)
> 1 153
> ..
> quit
> +OK see ya later
> Connection closed by foreign host.
>
> This is a valid pop3 session.
>
> eric
>
>
>
> _______________________________________________
> Dbmail mailing list
> [email protected]
> https://mailman.fastxs.nl/mailman/listinfo/dbmail
>
__________________________
E.J.A. van Beek
ICT Manager
IC&S
T: +31 30 2322878
F: +31 30 2322305
PGP-key:
www.ic-s.nl/keys/eelco.txt
