Paul Stevens-2 wrote:
>
>
> Why not use the rimap saslauthd mechanism??
>
> Will that work with the DBmail Administrator? I use DBmail Administrator
> to Add/Delete all users, so It would be helpful to know how ther DBmail
> Administrator handles Adding/Deleting user, and how the md5 setting
> inegrates into that. When I was using Cyrus, all the users password pairs
> were in a sasldb file, but I don't know where the DBmail Administrator
> stores the user name and password, or if its independent of the Fedora 6
> user name and password or not.
>
> that way you don't need to worry about password encodings.
>
> I'm sure I did an entry on the wiki once, but I can't seem to find it
> anymore...
>
> I just want to be sure that whatever I use will work with the DBmail
> Administrator. The DBmail Administrator is really helpful.
>
> Regards,
>
> LelandJ
>
>
> lelandj wrote:
>> Whoops, here is the email again without HTML stripping line feeds and
>> carriage returns:
>>
>> I need to configure sasl for dbmail to allow postfix fo relay emails sent
>> from a couple of roaming users via their iphones. The Iphones connect to
>> different networks wirelessly, as the users roam about. The iPones
>> receive
>> a dynamic IP address from the network to which they connect. It is my
>> understanding that postfix will allow relaying of emails from remote
>> users
>> that can connect to the mail server using sasl.
>>
>> I used Cyrus with sasl four or five years ago and had sasl configured to
>> work with it using the sasldb file, which stored users names and
>> passwords,
>> but I'm currently using Dbmail Administrator to add/delete users using
>> MD5
>> authentication.
>>
>> Below is the /etc/imapd.conf file on my Fedora 6 mail server:
>>
>> allowplaintext: yes
>> hashimapspool: 1
>> sasl_mech_list: PLAIN
>> sharedprefix: shared
>> virtdomains: 0
>> maxmessagesize: 5000000
>> sievedir: /var/lib/imap/sieve
>> admins: cyrus root
>> sasl_pwcheck_method: saslauthd
>> configdirectory: /var/lib/imap
>> tls_ca_file: /etc/pki/tls/certs/ca-bundle.crt
>> altnamespace: 1
>> autocreatequota_units: 1
>> tls_key_file: /etc/pki/cyrus-imapd/cyrus-imapd.pem
>> sendmail: /usr/sbin/sendmail
>> unixhierarchysep: 1
>> partition-default: /var/spool/imap
>> sieve_maxscriptsize: 320
>> userprefix: user
>> tls_cert_file: /etc/pki/cyrus-imapd/cyrus-imapd.pem
>>
>> Regards,
>>
>> LelandJ
>>
>
>
> --
> ________________________________________________________________
> Paul Stevens paul at nfg.nl
> NET FACILITIES GROUP GPG/PGP: 1024D/11F8CD31
> The Netherlands________________________________http://www.nfg.nl
> _______________________________________________
> DBmail mailing list
> [email protected]
> http://mailman.fastxs.nl/cgi-bin/mailman/listinfo/dbmail
>
>
--
View this message in context:
http://old.nabble.com/Using-sasl-with-dbmail-and-md5-login-tp27468767p27470385.html
Sent from the dbmail users mailing list archive at Nabble.com.
_______________________________________________
DBmail mailing list
[email protected]
http://mailman.fastxs.nl/cgi-bin/mailman/listinfo/dbmail
