| > So here are the stats using iperf:
| > Test 2.6.19rc6+ian
| > 2.6.20-acme20
| > Direct connect 87 Mbits 36 Mbits
| > Through a Linux router (1.2 ms rtt) 36 Mbit 200 kbits
| > (yes that is correct!)
| > Through netem (100 ms rtt, 5% loss) 130 kbits 116 kbits (OK)
| >
| I've been trying to track this down to any individual patch and I'm
| going crazy! With my code (2.6.19rc6+my patches) now I'm getting the
| same bad numbers as for 2.6.20-acme20
I can confirm this - it seems sometimes as if the code in a fuzzy way needs to
`warm up'.
Also I can not test at home with my older equipment - DCCP is too demanding on
CPU speed;
the top performance even with CCID2 is 15Mbits/sec.
Therefore the more experience/performance reports come in, the better for
understanding
what is going on.
-
To unsubscribe from this list: send the line "unsubscribe dccp" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
