Thanks TK
On 25 November 2011 01:48, Praveen C <[email protected]> wrote: > maybe this helps > > > http://www.ansys.com/staticassets/ANSYS/Initial%20Content%20Entry/General%20Articles%20-%20Products/ICEM%20CFD%20Interfaces/cobalt.htm > > praveen > > > On Fri, Nov 25, 2011 at 12:25 AM, Ted Kord <[email protected]> wrote: > >> Thanks Praveen. >> >> How do I save in cobalt format? I'm using ICEM CFD 12.0 and there's no >> option to do this. >> >> TK >> >> >> On 24 November 2011 05:32, Praveen C <[email protected]> wrote: >> >>> I suspect that Nastran is saving the interior faces into the grid, and >>> gmsh is retaining them while converting. And deal.II maybe does not like >>> interior faces. >>> >>> If you can save mesh in cobalt format, I have a converter to gmsh format >>> here >>> >>> http://code.google.com/p/cfdlab/source/browse/trunk/3d/grid/cobalt2gmsh.c >>> >>> There is some scaling of coordinates done in the code which you can >>> delete. >>> >>> praveen >>> >>> On Wed, Nov 16, 2011 at 12:03 AM, Ted Kord <[email protected]> wrote: >>> >>>> Hi >>>> >>>> I wonder if anyone else has had this problem and could help with it. >>>> >>>> I used Ansys ICEM CFD to mesh a geometry and save it in Nastran .dat >>>> format. I then opened it in gmsh and converted it to .msh format. Trying to >>>> read the mesh in deal.II produces the following error: >>>> >>>> ---------------------------------------------------- >>>> Exception on processing: >>>> -------------------------------------------------------- >>>> An error occurred in line <2585> of file >>>> </home/tedkord/deal.II/source/grid/tria.cc> in function >>>> static void >>>> dealii::internal::Triangulation::Implementation::create_triangulation(const >>>> std::vector<dealii::Point<dim, double>, std::allocator<dealii::Point<dim, >>>> double> > >&, const std::vector<dealii::CellData<3>, >>>> std::allocator<dealii::CellData<3> > >&, const dealii::SubCellData&, >>>> dealii::Triangulation<3, spacedim>&) [with int spacedim = 3] >>>> The violated condition was: >>>> line->at_boundary() >>>> The name and call sequence of the exception was: >>>> ExcInteriorLineCantBeBoundary() >>>> Additional Information: >>>> (none) >>>> >>>> >>>> >>>> This occurs for any nastran .dat mesh I convert in gmsh. My >>>> assumption's that if it can be read and converted in gmsh, then it should >>>> be readable in deal.II. Is this wrong? >>>> >>>> -- >>>> Thanks >>>> >>>> Theodore K >>>> >>>> >>>> >>>> _______________________________________________ >>>> dealii mailing list http://poisson.dealii.org/mailman/listinfo/dealii >>>> >>>> >>> >> >> >> -- >> Best regards, >> >> Theodore >> >> >> > -- Best regards, Theodore
_______________________________________________ dealii mailing list http://poisson.dealii.org/mailman/listinfo/dealii
