I am not sure. But it is worth a try! Peter
On Wednesday, 7 April 2021 at 13:30:59 UTC+2 [email protected] wrote: > Peter, > > Thanks for your response. I am using GridOut because I only require > printing the triangulation (like in group manifold > <https://www.dealii.org/current/doxygen/deal.II/group__manifold.html>). > Should I use DataOut even in this case? I thought this was not required. > > On Wednesday, April 7, 2021 at 4:21:00 PM UTC+5:30 peterrum wrote: > >> My guess is that you did not specify the last argument in >> https://www.dealii.org/developer/doxygen/deal.II/classDataOut.html#a04d491be143f2672b076622e7abd32b8. >> >> The default is that only the boundary is plotted curved. >> >> Hope this helps! >> >> Peter >> >> On Wednesday, 7 April 2021 at 12:46:04 UTC+2 [email protected] wrote: >> >>> Sorry for continuing on this thread, my current question is not fully >>> relevant, but related to this. >>> >>> I have a coarse mesh for a hollow cylinder I have read this file and >>> applied a cylindrical manifold by first calling >>> Triangulation::set_all_manifold_ids() and then >>> Triangulation::set_manifold(). >>> >>> To test, I have then printed the triangulation in gnuplot format using >>> GridOut using MappingQGeneric<>(2). A plot of the output shows that >>> additional points have been added only to the boundaries but not to the >>> internal edges. >>> >>> Am I missing something? >>> >>> -- The deal.II project is located at http://www.dealii.org/ For mailing list/forum options, see https://groups.google.com/d/forum/dealii?hl=en --- You received this message because you are subscribed to the Google Groups "deal.II User Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/dealii/5c7370f7-5f56-4299-b9eb-8f70f3b57c9cn%40googlegroups.com.
