Thank you very much for your response and clarification Wolfgang. - Morris Jowas
On Tuesday, September 7, 2021 at 5:01:06 PM UTC+1 Wolfgang Bangerth wrote: > > Morris, > > > I am a new deal.ii user pursuing a PhD in thermal management of printed > > circuit boards .I am trying to analyse a steady state heat transfer > > problem on a 3d rectangular domain. The domain has a convective heat > > flux boundary condition on the top and bottom surfaces. There is also a > > discrete heat source on the top surface. > > > > I am inputting my geometry using as a vtk file using the *read_vtk()* > > function. My questions: > > > > - Is there a way to include the boundary conditions in the input file? > > > > - Is it possible to include the material properties of the cells in the > > input file. Each cell can potentially be anisotropic and have different > > thermal conductivity in the x, y and z directions. > > > > From reading the documentation it seems that the vtk input file can > > include MaterialID and BoundaryID data, but it would be useful for me to > > also include the accompanying properties of the identified materials and > > boundaries. > > VTK is a rich enough file format that it might in principle be possible > to include this sort of information into the mesh file. But, in > practice, that's not how people do things -- instead, one just puts > material and boundary ids into the mesh file, and then make the > association with material properties and what a particular boundary id > means in the solver. > > In other words, in your assembly loop, you'd just query the material_id > of a cell, and based on that decide what the material properties of that > cell should be. > > Best > W. > > -- > ------------------------------------------------------------------------ > Wolfgang Bangerth email: [email protected] > www: http://www.math.colostate.edu/~bangerth/ > -- The deal.II project is located at http://www.dealii.org/ For mailing list/forum options, see https://groups.google.com/d/forum/dealii?hl=en --- You received this message because you are subscribed to the Google Groups "deal.II User Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/dealii/45594160-6587-4a13-8e16-eb301e635c88n%40googlegroups.com.
