OK. I am attaching the output of  ./candi.sh -j 1 as an output.txt file. I 
hope that is ok. I was not sure what I should look for higher up in the 
output.
Thank you
SN

On Thursday, May 9, 2024 at 11:45:18 AM UTC+5:30 Wolfgang Bangerth wrote:

> On 5/9/24 11:35, Narasimhan Swaminathan IITM wrote:
> > The system has 64GB RAM
>
> That should be plenty. Do you have a ULIMIT set?
>
> In the error messages, all you show is the output from 'make', which 
> simply 
> reports "a compile job failed". Can you show what the compiler actually 
> said, 
> somewhere higher up in the output?
>
> Best
> W.
>
> -- 
> ------------------------------------------------------------------------
> Wolfgang Bangerth email: [email protected]
> www: http://www.math.colostate.edu/~bangerth/
>
>
>

-- 
The deal.II project is located at http://www.dealii.org/
For mailing list/forum options, see 
https://groups.google.com/d/forum/dealii?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"deal.II User Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/dealii/762c0a78-9c87-4959-b1a7-1bf731ea452fn%40googlegroups.com.
*******************************************************************************
candi tries now to download, configure, build and install:

Project:  deal.II-toolchain
Platform: deal.II-toolchain/platforms/supported/ubuntu.platform

Loading dealii-prepare
Skipping adolc
Skipping arpack-ng
Skipping assimp
Skipping ginkgo
Skipping gmsh
Skipping gsl
Skipping opencascade
Skipping parmetis
Skipping sundials
Skipping superlu_dist
Skipping hdf5
Skipping netcdf
Skipping p4est
trilinos: configuration with ParMETIS
trilinos: configuration with SuperLU_dist
trilinos: configuration with netCDF and SEACAS
Fetching trilinos 13-2-0
Verifying trilinos-release-13-2-0.tar.gz
trilinos-release-13-2-0.tar.gz: OK(md5)
trilinos-release-13-2-0.tar.gz already downloaded and verified.
Unpacking trilinos-release-13-2-0.tar.gz
Building trilinos 13-2-0

Configuring Trilinos build directory

-- 
PROJECT_SOURCE_DIR='/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0'
-- 
PROJECT_BINARY_DIR='/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/build/trilinos-release-13-2-0'
-- 
Trilinos_TRIBITS_DIR='/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/cmake/tribits'
-- TriBITS_VERSION_STRING='0.9 (Dev)'
-- CMAKE_VERSION='3.28.3'
-- CMAKE_GENERATOR='Unix Makefiles'
-- CMAKE_HOST_SYSTEM_NAME='Linux'
-- Trilinos_HOSTNAME='narasimhan'
CMake Warning (dev) at 
cmake/tribits/core/package_arch/TribitsFindPythonInterp.cmake:64 (find_package):
  Policy CMP0148 is not set: The FindPythonInterp and FindPythonLibs modules
  are removed.  Run "cmake --help-policy CMP0148" for policy details.  Use
  the cmake_policy command to set the policy and suppress this warning.

Call Stack (most recent call first):
  cmake/tribits/core/package_arch/TribitsFindPythonInterp.cmake:80 
(tribits_find_python)
  cmake/tribits/core/package_arch/TribitsProjectImpl.cmake:102 
(tribits_find_python_interp)
  cmake/tribits/core/package_arch/TribitsProject.cmake:93 (tribits_project_impl)
  CMakeLists.txt:109 (TRIBITS_PROJECT)
This warning is for project developers.  Use -Wno-dev to suppress it.

-- Found PythonInterp: /usr/bin/python3 (found suitable version "3.12.3", 
minimum required is "2.6") 
-- PYTHON_EXECUTABLE='/usr/bin/python3'
-- Found Git: /usr/bin/git (found version "2.43.0") 

Setting up major user options ...

-- Setting Trilinos_ENABLE_TriKota=OFF because 
'/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/TriKota/Dakota'
 does not exist!

NOTE: Skipping generation of TrilinosRepoVersion.txt because project source is 
not a git repo!

Reading list of native TPLs from 
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/TPLsList.cmake

-- Trilinos_NUM_TPLS='116'

Reading list of native packages from 
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/PackagesList.cmake

-- Trilinos_NUM_PACKAGES='64'

Processing Project, Repository, and Package dependency files and building 
internal dependencies graph ...

-- Trilinos_NUM_SE_PACKAGES='160'
-- Tentatively enabling TPL 'DLlib'

Explicitly enabled packages on input (by user):  Teuchos Sacado Epetra Zoltan 
EpetraExt Tpetra AztecOO Amesos Ifpack ML Belos Amesos2 SEACAS Stratimikos NOX 
MueLu ROL 17

Explicitly enabled SE packages on input (by user):  Teuchos Sacado Epetra 
Zoltan EpetraExt Tpetra AztecOO Amesos Ifpack ML Belos Amesos2 SEACAS 
Stratimikos NOX MueLu ROL 17

Explicitly disabled packages on input (by user or by default):  Ifpack2 TriKota 
NewPackage 3

Explicitly disabled SE packages on input (by user or by default):  
ShyLU_NodeBasker ShyLU_NodeFastILU SEACASExotec2 SEACASSlice Ifpack2 TriKota 
ShyLU_DDCore PanzerExprEval NewPackage 9

Explicitly enabled TPLs on input (by user):  MPI ParMETIS Netcdf SuperLUDist 
DLlib 5

Explicitly disabled TPLs on input (by user or by default):  TBB Boost Matio X11 
4

Disabling all packages that have a required dependency on disabled TPLs and 
optional package TPL support based on TPL_ENABLE_<TPL>=OFF ...

-- Setting Trilinos_ENABLE_MiniTensor=OFF because MiniTensor has a required 
library dependence on disabled TPL Boost
-- Setting Trilinos_ENABLE_SEACASSVDI=OFF because SEACASSVDI has a required 
library dependence on disabled TPL X11
-- Setting Trilinos_ENABLE_SEACASExo2mat=OFF because SEACASExo2mat has a 
required library dependence on disabled TPL Matio
-- Setting Trilinos_ENABLE_SEACASMat2exo=OFF because SEACASMat2exo has a 
required library dependence on disabled TPL Matio

Disabling subpackages for hard disables of parent packages due to 
Trilinos_ENABLE_<PARENT_PACKAGE>=OFF ...


Disabling forward required SE packages and optional intra-package support that 
have a dependency on disabled SE packages Trilinos_ENABLE_<TRIBITS_PACKAGE>=OFF 
...

-- Setting ROL_ENABLE_MiniTensor=OFF because ROL has an optional library 
dependence on disabled package MiniTensor
-- Setting Amesos2_ENABLE_ShyLU_NodeBasker=OFF because Amesos2 has an optional 
library dependence on disabled package ShyLU_NodeBasker
-- Setting Trilinos_ENABLE_SEACASPLT=OFF because SEACASPLT has a required 
library dependence on disabled package SEACASSVDI
-- Setting SEACAS_ENABLE_SEACASSVDI=OFF because SEACAS has an optional library 
dependence on disabled package SEACASSVDI
-- Setting Trilinos_ENABLE_SEACASBlot=OFF because SEACASBlot has a required 
library dependence on disabled package SEACASPLT
-- Setting Trilinos_ENABLE_SEACASFastq=OFF because SEACASFastq has a required 
library dependence on disabled package SEACASPLT
-- Setting SEACAS_ENABLE_SEACASPLT=OFF because SEACAS has an optional library 
dependence on disabled package SEACASPLT
-- Setting SEACAS_ENABLE_SEACASBlot=OFF because SEACAS has an optional library 
dependence on disabled package SEACASBlot
-- Setting SEACAS_ENABLE_SEACASExo2mat=OFF because SEACAS has an optional 
library dependence on disabled package SEACASExo2mat
-- Setting SEACAS_ENABLE_SEACASExotec2=OFF because SEACAS has an optional 
library dependence on disabled package SEACASExotec2
-- Setting SEACAS_ENABLE_SEACASFastq=OFF because SEACAS has an optional library 
dependence on disabled package SEACASFastq
-- Setting SEACAS_ENABLE_SEACASMat2exo=OFF because SEACAS has an optional 
library dependence on disabled package SEACASMat2exo
-- Setting SEACAS_ENABLE_SEACASSlice=OFF because SEACAS has an optional library 
dependence on disabled package SEACASSlice
-- Setting Trilinos_ENABLE_Zoltan2Sphynx=OFF because Zoltan2Sphynx has a 
required library dependence on disabled package Ifpack2
-- Setting MueLu_ENABLE_Ifpack2=OFF because MueLu has an optional library 
dependence on disabled package Ifpack2
-- Setting ROL_ENABLE_Ifpack2=OFF because ROL has an optional library 
dependence on disabled package Ifpack2
-- Setting Teko_ENABLE_TESTS=OFF because Teko has a required test/example 
dependence on disabled package Ifpack2
-- Setting Teko_ENABLE_EXAMPLES=OFF because Teko has a required test/example 
dependence on disabled package Ifpack2
-- Setting PanzerAdaptersSTK_ENABLE_TESTS=OFF because PanzerAdaptersSTK has a 
required test/example dependence on disabled package Ifpack2
-- Setting PanzerAdaptersSTK_ENABLE_EXAMPLES=OFF because PanzerAdaptersSTK has 
a required test/example dependence on disabled package Ifpack2
-- Setting ROL_ENABLE_TriKota=OFF because ROL has an optional library 
dependence on disabled package TriKota

Enabling subpackages for hard enables of parent packages due to 
Trilinos_ENABLE_<PARENT_PACKAGE>=ON ...

-- Setting subpackage enable Trilinos_ENABLE_TeuchosCore=ON because parent 
package Trilinos_ENABLE_Teuchos=ON
-- Setting subpackage enable Trilinos_ENABLE_TeuchosParser=ON because parent 
package Trilinos_ENABLE_Teuchos=ON
-- Setting subpackage enable Trilinos_ENABLE_TeuchosParameterList=ON because 
parent package Trilinos_ENABLE_Teuchos=ON
-- Setting subpackage enable Trilinos_ENABLE_TeuchosComm=ON because parent 
package Trilinos_ENABLE_Teuchos=ON
-- Setting subpackage enable Trilinos_ENABLE_TeuchosNumerics=ON because parent 
package Trilinos_ENABLE_Teuchos=ON
-- Setting subpackage enable Trilinos_ENABLE_TeuchosRemainder=ON because parent 
package Trilinos_ENABLE_Teuchos=ON
-- Setting subpackage enable Trilinos_ENABLE_TeuchosKokkosCompat=ON because 
parent package Trilinos_ENABLE_Teuchos=ON
-- Setting subpackage enable Trilinos_ENABLE_TeuchosKokkosComm=ON because 
parent package Trilinos_ENABLE_Teuchos=ON
-- Setting subpackage enable Trilinos_ENABLE_TpetraClassic=ON because parent 
package Trilinos_ENABLE_Tpetra=ON
-- Setting subpackage enable Trilinos_ENABLE_TpetraTSQR=ON because parent 
package Trilinos_ENABLE_Tpetra=ON
-- Setting subpackage enable Trilinos_ENABLE_TpetraCore=ON because parent 
package Trilinos_ENABLE_Tpetra=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASExodus=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASExodus_for=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASExoIIv2for32=ON because 
parent package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASNemesis=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASIoss=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASChaco=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASAprepro_lib=ON because 
parent package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASSupes=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASSuplib=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASSuplibC=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASSuplibCpp=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASAlgebra=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASAprepro=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASConjoin=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASEjoin=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASEpu=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASExodiff=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASExomatlab=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASExotxt=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASExo_format=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASEx1ex2v2=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASGjoin=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASGen3D=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASGenshell=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASGrepos=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASExplore=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASMapvarlib=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASMapvar=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASMapvar-kd=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASNas2exo=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASZellij=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASNemslice=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASNemspread=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASNumbers=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASTxtexo=ON because parent 
package Trilinos_ENABLE_SEACAS=ON
-- Setting subpackage enable Trilinos_ENABLE_SEACASEx2ex1v2=ON because parent 
package Trilinos_ENABLE_SEACAS=ON

Enabling all required (and optional since 
Trilinos_ENABLE_ALL_OPTIONAL_PACKAGES=ON) upstream SE packages for current set 
of enabled packages (Trilinos_ENABLE_SECONDARY_TESTED_CODE=ON) ...

-- Setting Trilinos_ENABLE_Thyra=ON because ROL has an optional dependence on 
Thyra
-- Setting Trilinos_ENABLE_Intrepid=ON because ROL has an optional dependence 
on Intrepid
-- Setting Trilinos_ENABLE_Shards=ON because ROL has an optional dependence on 
Shards
-- Setting Trilinos_ENABLE_Tempus=ON because ROL has an optional dependence on 
Tempus
-- Setting Trilinos_ENABLE_Gtest=ON because ROL has an optional dependence on 
Gtest
-- Setting Trilinos_ENABLE_ThyraCore=ON because Tempus has a required 
dependence on ThyraCore
-- Setting Trilinos_ENABLE_ThyraEpetraAdapters=ON because Tempus has a required 
dependence on ThyraEpetraAdapters
-- Setting Trilinos_ENABLE_Xpetra=ON because MueLu has a required dependence on 
Xpetra
-- Setting Trilinos_ENABLE_KokkosCore=ON because MueLu has a required 
dependence on KokkosCore
-- Setting Trilinos_ENABLE_KokkosContainers=ON because MueLu has a required 
dependence on KokkosContainers
-- Setting Trilinos_ENABLE_KokkosKernels=ON because MueLu has a required 
dependence on KokkosKernels
-- Setting Trilinos_ENABLE_Teko=ON because MueLu has an optional dependence on 
Teko
-- Setting Trilinos_ENABLE_Intrepid2=ON because MueLu has an optional 
dependence on Intrepid2
-- Setting Trilinos_ENABLE_Zoltan2Core=ON because MueLu has an optional 
dependence on Zoltan2Core
-- Setting Trilinos_ENABLE_ThyraTpetraAdapters=ON because MueLu has an optional 
dependence on ThyraTpetraAdapters
-- Setting Trilinos_ENABLE_Isorropia=ON because MueLu has an optional 
dependence on Isorropia
-- Setting Trilinos_ENABLE_Galeri=ON because MueLu has a required dependence on 
Galeri
-- Setting Trilinos_ENABLE_Pamgen=ON because MueLu has an optional dependence 
on Pamgen
-- Setting Trilinos_ENABLE_ThyraEpetraExtAdapters=ON because NOX has an 
optional dependence on ThyraEpetraExtAdapters
-- Setting Trilinos_ENABLE_Anasazi=ON because NOX has an optional dependence on 
Anasazi
-- Setting Trilinos_ENABLE_KokkosAlgorithms=ON because Intrepid2 has a required 
dependence on KokkosAlgorithms
-- Setting Trilinos_ENABLE_Triutils=ON because Stratimikos has an optional 
dependence on Triutils
-- Setting Trilinos_ENABLE_Kokkos=ON because SEACASIoss has an optional 
dependence on Kokkos
-- Setting Trilinos_ENABLE_TrilinosSS=ON because Amesos2 has a required 
dependence on TrilinosSS
-- Setting Trilinos_ENABLE_ShyLU_NodeTacho=ON because Amesos2 has an optional 
dependence on ShyLU_NodeTacho
-- Setting Trilinos_ENABLE_RTOp=ON because ThyraCore has a required dependence 
on RTOp

Enabling all optional intra-package enables 
<TRIBITS_PACKAGE>_ENABLE_<DEPPACKAGE> that are not currently disabled if both 
sets of packages are enabled ...

-- Setting Kokkos_ENABLE_KokkosContainers=ON since Trilinos_ENABLE_Kokkos=ON 
AND Trilinos_ENABLE_KokkosContainers=ON
-- Setting Kokkos_ENABLE_KokkosAlgorithms=ON since Trilinos_ENABLE_Kokkos=ON 
AND Trilinos_ENABLE_KokkosAlgorithms=ON
-- Setting TeuchosCore_ENABLE_KokkosCore=ON since 
Trilinos_ENABLE_TeuchosCore=ON AND Trilinos_ENABLE_KokkosCore=ON
-- Setting Teuchos_ENABLE_TeuchosKokkosCompat=ON since 
Trilinos_ENABLE_Teuchos=ON AND Trilinos_ENABLE_TeuchosKokkosCompat=ON
-- Setting Teuchos_ENABLE_TeuchosKokkosComm=ON since Trilinos_ENABLE_Teuchos=ON 
AND Trilinos_ENABLE_TeuchosKokkosComm=ON
-- Setting Sacado_ENABLE_KokkosCore=ON since Trilinos_ENABLE_Sacado=ON AND 
Trilinos_ENABLE_KokkosCore=ON
-- Setting Sacado_ENABLE_TeuchosCore=ON since Trilinos_ENABLE_Sacado=ON AND 
Trilinos_ENABLE_TeuchosCore=ON
-- Setting Sacado_ENABLE_TeuchosNumerics=ON since Trilinos_ENABLE_Sacado=ON AND 
Trilinos_ENABLE_TeuchosNumerics=ON
-- Setting Sacado_ENABLE_TeuchosComm=ON since Trilinos_ENABLE_Sacado=ON AND 
Trilinos_ENABLE_TeuchosComm=ON
-- Setting Sacado_ENABLE_TeuchosKokkosComm=ON since Trilinos_ENABLE_Sacado=ON 
AND Trilinos_ENABLE_TeuchosKokkosComm=ON
-- Setting Sacado_ENABLE_KokkosContainers=ON since Trilinos_ENABLE_Sacado=ON 
AND Trilinos_ENABLE_KokkosContainers=ON
-- Setting Epetra_ENABLE_Teuchos=ON since Trilinos_ENABLE_Epetra=ON AND 
Trilinos_ENABLE_Teuchos=ON
-- Setting Shards_ENABLE_Teuchos=ON since Trilinos_ENABLE_Shards=ON AND 
Trilinos_ENABLE_Teuchos=ON
-- Setting Triutils_ENABLE_Epetra=ON since Trilinos_ENABLE_Triutils=ON AND 
Trilinos_ENABLE_Epetra=ON
-- Setting EpetraExt_ENABLE_Triutils=ON since Trilinos_ENABLE_EpetraExt=ON AND 
Trilinos_ENABLE_Triutils=ON
-- Setting TpetraCore_ENABLE_Epetra=ON since Trilinos_ENABLE_TpetraCore=ON AND 
Trilinos_ENABLE_Epetra=ON
-- Setting TpetraCore_ENABLE_TpetraTSQR=ON since Trilinos_ENABLE_TpetraCore=ON 
AND Trilinos_ENABLE_TpetraTSQR=ON
-- Setting TpetraCore_ENABLE_TeuchosNumerics=ON since 
Trilinos_ENABLE_TpetraCore=ON AND Trilinos_ENABLE_TeuchosNumerics=ON
-- Setting Tpetra_ENABLE_TpetraTSQR=ON since Trilinos_ENABLE_Tpetra=ON AND 
Trilinos_ENABLE_TpetraTSQR=ON
-- Setting ThyraTpetraAdapters_ENABLE_ThyraEpetraAdapters=ON since 
Trilinos_ENABLE_ThyraTpetraAdapters=ON AND 
Trilinos_ENABLE_ThyraEpetraAdapters=ON
-- Setting Thyra_ENABLE_ThyraEpetraAdapters=ON since Trilinos_ENABLE_Thyra=ON 
AND Trilinos_ENABLE_ThyraEpetraAdapters=ON
-- Setting Thyra_ENABLE_ThyraEpetraExtAdapters=ON since 
Trilinos_ENABLE_Thyra=ON AND Trilinos_ENABLE_ThyraEpetraExtAdapters=ON
-- Setting Thyra_ENABLE_ThyraTpetraAdapters=ON since Trilinos_ENABLE_Thyra=ON 
AND Trilinos_ENABLE_ThyraTpetraAdapters=ON
-- NOTE: Xpetra_ENABLE_Epetra=OFF is already set so not enabling even though 
Trilinos_ENABLE_Epetra=ON is set!
-- NOTE: Xpetra_ENABLE_EpetraExt=OFF is already set so not enabling even though 
Trilinos_ENABLE_EpetraExt=ON is set!
-- Setting Xpetra_ENABLE_Tpetra=ON since Trilinos_ENABLE_Xpetra=ON AND 
Trilinos_ENABLE_Tpetra=ON
-- Setting Xpetra_ENABLE_KokkosKernels=ON since Trilinos_ENABLE_Xpetra=ON AND 
Trilinos_ENABLE_KokkosKernels=ON
-- Setting Xpetra_ENABLE_Thyra=ON since Trilinos_ENABLE_Xpetra=ON AND 
Trilinos_ENABLE_Thyra=ON
-- NOTE: Xpetra_ENABLE_Epetra=OFF is already set so not enabling even though 
Trilinos_ENABLE_Epetra=ON is set!
-- NOTE: Xpetra_ENABLE_EpetraExt=OFF is already set so not enabling even though 
Trilinos_ENABLE_EpetraExt=ON is set!
-- NOTE: Xpetra_ENABLE_Tpetra=ON is already set!
-- NOTE: Xpetra_ENABLE_KokkosKernels=ON is already set!
-- NOTE: Xpetra_ENABLE_Thyra=ON is already set!
-- Setting AztecOO_ENABLE_Teuchos=ON since Trilinos_ENABLE_AztecOO=ON AND 
Trilinos_ENABLE_Teuchos=ON
-- Setting Galeri_ENABLE_Epetra=ON since Trilinos_ENABLE_Galeri=ON AND 
Trilinos_ENABLE_Epetra=ON
-- Setting Galeri_ENABLE_EpetraExt=ON since Trilinos_ENABLE_Galeri=ON AND 
Trilinos_ENABLE_EpetraExt=ON
-- Setting Galeri_ENABLE_Xpetra=ON since Trilinos_ENABLE_Galeri=ON AND 
Trilinos_ENABLE_Xpetra=ON
-- Setting Galeri_ENABLE_Tpetra=ON since Trilinos_ENABLE_Galeri=ON AND 
Trilinos_ENABLE_Tpetra=ON
-- Setting Galeri_ENABLE_Triutils=ON since Trilinos_ENABLE_Galeri=ON AND 
Trilinos_ENABLE_Triutils=ON
-- Setting Amesos_ENABLE_EpetraExt=ON since Trilinos_ENABLE_Amesos=ON AND 
Trilinos_ENABLE_EpetraExt=ON
-- Setting Amesos_ENABLE_Triutils=ON since Trilinos_ENABLE_Amesos=ON AND 
Trilinos_ENABLE_Triutils=ON
-- Setting Amesos_ENABLE_Galeri=ON since Trilinos_ENABLE_Amesos=ON AND 
Trilinos_ENABLE_Galeri=ON
-- Setting Zoltan2Core_ENABLE_Epetra=ON since Trilinos_ENABLE_Zoltan2Core=ON 
AND Trilinos_ENABLE_Epetra=ON
-- NOTE: Zoltan2Core_ENABLE_Epetra=ON is already set!
-- Setting Zoltan2Core_ENABLE_Galeri=ON since Trilinos_ENABLE_Zoltan2Core=ON 
AND Trilinos_ENABLE_Galeri=ON
-- Setting Zoltan2Core_ENABLE_Pamgen=ON since Trilinos_ENABLE_Zoltan2Core=ON 
AND Trilinos_ENABLE_Pamgen=ON
-- Setting Ifpack_ENABLE_Amesos=ON since Trilinos_ENABLE_Ifpack=ON AND 
Trilinos_ENABLE_Amesos=ON
-- Setting Ifpack_ENABLE_EpetraExt=ON since Trilinos_ENABLE_Ifpack=ON AND 
Trilinos_ENABLE_EpetraExt=ON
-- Setting Ifpack_ENABLE_AztecOO=ON since Trilinos_ENABLE_Ifpack=ON AND 
Trilinos_ENABLE_AztecOO=ON
-- Setting Ifpack_ENABLE_Galeri=ON since Trilinos_ENABLE_Ifpack=ON AND 
Trilinos_ENABLE_Galeri=ON
-- Setting ML_ENABLE_Teuchos=ON since Trilinos_ENABLE_ML=ON AND 
Trilinos_ENABLE_Teuchos=ON
-- Setting ML_ENABLE_Epetra=ON since Trilinos_ENABLE_ML=ON AND 
Trilinos_ENABLE_Epetra=ON
-- Setting ML_ENABLE_Zoltan=ON since Trilinos_ENABLE_ML=ON AND 
Trilinos_ENABLE_Zoltan=ON
-- Setting ML_ENABLE_Galeri=ON since Trilinos_ENABLE_ML=ON AND 
Trilinos_ENABLE_Galeri=ON
-- Setting ML_ENABLE_Amesos=ON since Trilinos_ENABLE_ML=ON AND 
Trilinos_ENABLE_Amesos=ON
-- Setting ML_ENABLE_Ifpack=ON since Trilinos_ENABLE_ML=ON AND 
Trilinos_ENABLE_Ifpack=ON
-- Setting ML_ENABLE_AztecOO=ON since Trilinos_ENABLE_ML=ON AND 
Trilinos_ENABLE_AztecOO=ON
-- Setting ML_ENABLE_EpetraExt=ON since Trilinos_ENABLE_ML=ON AND 
Trilinos_ENABLE_EpetraExt=ON
-- Setting ML_ENABLE_Isorropia=ON since Trilinos_ENABLE_ML=ON AND 
Trilinos_ENABLE_Isorropia=ON
-- Setting Belos_ENABLE_Epetra=ON since Trilinos_ENABLE_Belos=ON AND 
Trilinos_ENABLE_Epetra=ON
-- Setting Belos_ENABLE_Tpetra=ON since Trilinos_ENABLE_Belos=ON AND 
Trilinos_ENABLE_Tpetra=ON
-- Setting Belos_ENABLE_Xpetra=ON since Trilinos_ENABLE_Belos=ON AND 
Trilinos_ENABLE_Xpetra=ON
-- Setting Belos_ENABLE_Thyra=ON since Trilinos_ENABLE_Belos=ON AND 
Trilinos_ENABLE_Thyra=ON
-- Setting Belos_ENABLE_AztecOO=ON since Trilinos_ENABLE_Belos=ON AND 
Trilinos_ENABLE_AztecOO=ON
-- Setting Belos_ENABLE_Triutils=ON since Trilinos_ENABLE_Belos=ON AND 
Trilinos_ENABLE_Triutils=ON
-- Setting Belos_ENABLE_Galeri=ON since Trilinos_ENABLE_Belos=ON AND 
Trilinos_ENABLE_Galeri=ON
-- NOTE: Belos_ENABLE_Triutils=ON is already set!
-- Setting Belos_ENABLE_EpetraExt=ON since Trilinos_ENABLE_Belos=ON AND 
Trilinos_ENABLE_EpetraExt=ON
-- Setting Belos_ENABLE_Ifpack=ON since Trilinos_ENABLE_Belos=ON AND 
Trilinos_ENABLE_Ifpack=ON
-- Setting Belos_ENABLE_ML=ON since Trilinos_ENABLE_Belos=ON AND 
Trilinos_ENABLE_ML=ON
-- NOTE: Belos_ENABLE_AztecOO=ON is already set!
-- Setting Amesos2_ENABLE_Epetra=ON since Trilinos_ENABLE_Amesos2=ON AND 
Trilinos_ENABLE_Epetra=ON
-- Setting Amesos2_ENABLE_EpetraExt=ON since Trilinos_ENABLE_Amesos2=ON AND 
Trilinos_ENABLE_EpetraExt=ON
-- Setting Amesos2_ENABLE_ShyLU_NodeTacho=ON since Trilinos_ENABLE_Amesos2=ON 
AND Trilinos_ENABLE_ShyLU_NodeTacho=ON
-- NOTE: Amesos2_ENABLE_ShyLU_NodeTacho=ON is already set!
-- Setting Amesos2_ENABLE_Kokkos=ON since Trilinos_ENABLE_Amesos2=ON AND 
Trilinos_ENABLE_Kokkos=ON
-- Setting Amesos2_ENABLE_TrilinosSS=ON since Trilinos_ENABLE_Amesos2=ON AND 
Trilinos_ENABLE_TrilinosSS=ON
-- Setting SEACASIoss_ENABLE_SEACASExodus=ON since 
Trilinos_ENABLE_SEACASIoss=ON AND Trilinos_ENABLE_SEACASExodus=ON
-- Setting SEACASIoss_ENABLE_Pamgen=ON since Trilinos_ENABLE_SEACASIoss=ON AND 
Trilinos_ENABLE_Pamgen=ON
-- Setting SEACASIoss_ENABLE_Zoltan=ON since Trilinos_ENABLE_SEACASIoss=ON AND 
Trilinos_ENABLE_Zoltan=ON
-- Setting SEACASIoss_ENABLE_Kokkos=ON since Trilinos_ENABLE_SEACASIoss=ON AND 
Trilinos_ENABLE_Kokkos=ON
-- Setting SEACASAprepro_lib_ENABLE_SEACASExodus=ON since 
Trilinos_ENABLE_SEACASAprepro_lib=ON AND Trilinos_ENABLE_SEACASExodus=ON
-- Setting SEACASZellij_ENABLE_Zoltan=ON since Trilinos_ENABLE_SEACASZellij=ON 
AND Trilinos_ENABLE_Zoltan=ON
-- Setting SEACASNemslice_ENABLE_Zoltan=ON since 
Trilinos_ENABLE_SEACASNemslice=ON AND Trilinos_ENABLE_Zoltan=ON
-- Setting SEACAS_ENABLE_SEACASExodus_for=ON since Trilinos_ENABLE_SEACAS=ON 
AND Trilinos_ENABLE_SEACASExodus_for=ON
-- Setting SEACAS_ENABLE_SEACASExoIIv2for32=ON since Trilinos_ENABLE_SEACAS=ON 
AND Trilinos_ENABLE_SEACASExoIIv2for32=ON
-- Setting SEACAS_ENABLE_SEACASNemesis=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASNemesis=ON
-- Setting SEACAS_ENABLE_SEACASChaco=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASChaco=ON
-- Setting SEACAS_ENABLE_SEACASAprepro_lib=ON since Trilinos_ENABLE_SEACAS=ON 
AND Trilinos_ENABLE_SEACASAprepro_lib=ON
-- Setting SEACAS_ENABLE_SEACASSupes=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASSupes=ON
-- Setting SEACAS_ENABLE_SEACASSuplib=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASSuplib=ON
-- Setting SEACAS_ENABLE_SEACASSuplibC=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASSuplibC=ON
-- Setting SEACAS_ENABLE_SEACASSuplibCpp=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASSuplibCpp=ON
-- Setting SEACAS_ENABLE_SEACASAlgebra=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASAlgebra=ON
-- Setting SEACAS_ENABLE_SEACASAprepro=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASAprepro=ON
-- Setting SEACAS_ENABLE_SEACASConjoin=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASConjoin=ON
-- Setting SEACAS_ENABLE_SEACASEjoin=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASEjoin=ON
-- Setting SEACAS_ENABLE_SEACASEpu=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASEpu=ON
-- Setting SEACAS_ENABLE_SEACASExodiff=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASExodiff=ON
-- Setting SEACAS_ENABLE_SEACASExomatlab=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASExomatlab=ON
-- Setting SEACAS_ENABLE_SEACASExotxt=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASExotxt=ON
-- Setting SEACAS_ENABLE_SEACASExo_format=ON since Trilinos_ENABLE_SEACAS=ON 
AND Trilinos_ENABLE_SEACASExo_format=ON
-- Setting SEACAS_ENABLE_SEACASEx1ex2v2=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASEx1ex2v2=ON
-- Setting SEACAS_ENABLE_SEACASGjoin=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASGjoin=ON
-- Setting SEACAS_ENABLE_SEACASGen3D=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASGen3D=ON
-- Setting SEACAS_ENABLE_SEACASGenshell=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASGenshell=ON
-- Setting SEACAS_ENABLE_SEACASGrepos=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASGrepos=ON
-- Setting SEACAS_ENABLE_SEACASExplore=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASExplore=ON
-- Setting SEACAS_ENABLE_SEACASMapvarlib=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASMapvarlib=ON
-- Setting SEACAS_ENABLE_SEACASMapvar=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASMapvar=ON
-- Setting SEACAS_ENABLE_SEACASMapvar-kd=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASMapvar-kd=ON
-- Setting SEACAS_ENABLE_SEACASNas2exo=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASNas2exo=ON
-- Setting SEACAS_ENABLE_SEACASZellij=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASZellij=ON
-- Setting SEACAS_ENABLE_SEACASNemslice=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASNemslice=ON
-- Setting SEACAS_ENABLE_SEACASNemspread=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASNemspread=ON
-- Setting SEACAS_ENABLE_SEACASNumbers=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASNumbers=ON
-- Setting SEACAS_ENABLE_SEACASTxtexo=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASTxtexo=ON
-- Setting SEACAS_ENABLE_SEACASEx2ex1v2=ON since Trilinos_ENABLE_SEACAS=ON AND 
Trilinos_ENABLE_SEACASEx2ex1v2=ON
-- Setting Anasazi_ENABLE_Tpetra=ON since Trilinos_ENABLE_Anasazi=ON AND 
Trilinos_ENABLE_Tpetra=ON
-- Setting Anasazi_ENABLE_Epetra=ON since Trilinos_ENABLE_Anasazi=ON AND 
Trilinos_ENABLE_Epetra=ON
-- Setting Anasazi_ENABLE_EpetraExt=ON since Trilinos_ENABLE_Anasazi=ON AND 
Trilinos_ENABLE_EpetraExt=ON
-- Setting Anasazi_ENABLE_ThyraCore=ON since Trilinos_ENABLE_Anasazi=ON AND 
Trilinos_ENABLE_ThyraCore=ON
-- Setting Anasazi_ENABLE_ThyraEpetraAdapters=ON since 
Trilinos_ENABLE_Anasazi=ON AND Trilinos_ENABLE_ThyraEpetraAdapters=ON
-- Setting Anasazi_ENABLE_Belos=ON since Trilinos_ENABLE_Anasazi=ON AND 
Trilinos_ENABLE_Belos=ON
-- Setting Anasazi_ENABLE_Amesos=ON since Trilinos_ENABLE_Anasazi=ON AND 
Trilinos_ENABLE_Amesos=ON
-- Setting Anasazi_ENABLE_AztecOO=ON since Trilinos_ENABLE_Anasazi=ON AND 
Trilinos_ENABLE_AztecOO=ON
-- NOTE: Anasazi_ENABLE_Belos=ON is already set!
-- NOTE: Anasazi_ENABLE_EpetraExt=ON is already set!
-- Setting Anasazi_ENABLE_Galeri=ON since Trilinos_ENABLE_Anasazi=ON AND 
Trilinos_ENABLE_Galeri=ON
-- Setting Anasazi_ENABLE_Ifpack=ON since Trilinos_ENABLE_Anasazi=ON AND 
Trilinos_ENABLE_Ifpack=ON
-- Setting Anasazi_ENABLE_Triutils=ON since Trilinos_ENABLE_Anasazi=ON AND 
Trilinos_ENABLE_Triutils=ON
-- Setting Stratimikos_ENABLE_Amesos=ON since Trilinos_ENABLE_Stratimikos=ON 
AND Trilinos_ENABLE_Amesos=ON
-- Setting Stratimikos_ENABLE_Amesos2=ON since Trilinos_ENABLE_Stratimikos=ON 
AND Trilinos_ENABLE_Amesos2=ON
-- Setting Stratimikos_ENABLE_AztecOO=ON since Trilinos_ENABLE_Stratimikos=ON 
AND Trilinos_ENABLE_AztecOO=ON
-- Setting Stratimikos_ENABLE_Belos=ON since Trilinos_ENABLE_Stratimikos=ON AND 
Trilinos_ENABLE_Belos=ON
-- Setting Stratimikos_ENABLE_Ifpack=ON since Trilinos_ENABLE_Stratimikos=ON 
AND Trilinos_ENABLE_Ifpack=ON
-- Setting Stratimikos_ENABLE_ML=ON since Trilinos_ENABLE_Stratimikos=ON AND 
Trilinos_ENABLE_ML=ON
-- Setting Stratimikos_ENABLE_EpetraExt=ON since Trilinos_ENABLE_Stratimikos=ON 
AND Trilinos_ENABLE_EpetraExt=ON
-- Setting Stratimikos_ENABLE_ThyraEpetraAdapters=ON since 
Trilinos_ENABLE_Stratimikos=ON AND Trilinos_ENABLE_ThyraEpetraAdapters=ON
-- Setting Stratimikos_ENABLE_ThyraTpetraAdapters=ON since 
Trilinos_ENABLE_Stratimikos=ON AND Trilinos_ENABLE_ThyraTpetraAdapters=ON
-- Setting Stratimikos_ENABLE_Triutils=ON since Trilinos_ENABLE_Stratimikos=ON 
AND Trilinos_ENABLE_Triutils=ON
-- NOT setting Stratimikos_ENABLE_Ifpack2=ON since Ifpack2 is NOT enabled at 
this point!
-- Setting Teko_ENABLE_Isorropia=ON since Trilinos_ENABLE_Teko=ON AND 
Trilinos_ENABLE_Isorropia=ON
-- Setting Teko_ENABLE_Amesos2=ON since Trilinos_ENABLE_Teko=ON AND 
Trilinos_ENABLE_Amesos2=ON
-- Setting Teko_ENABLE_Belos=ON since Trilinos_ENABLE_Teko=ON AND 
Trilinos_ENABLE_Belos=ON
-- Setting Intrepid_ENABLE_Epetra=ON since Trilinos_ENABLE_Intrepid=ON AND 
Trilinos_ENABLE_Epetra=ON
-- Setting Intrepid_ENABLE_EpetraExt=ON since Trilinos_ENABLE_Intrepid=ON AND 
Trilinos_ENABLE_EpetraExt=ON
-- Setting Intrepid_ENABLE_Amesos=ON since Trilinos_ENABLE_Intrepid=ON AND 
Trilinos_ENABLE_Amesos=ON
-- Setting Intrepid_ENABLE_Pamgen=ON since Trilinos_ENABLE_Intrepid=ON AND 
Trilinos_ENABLE_Pamgen=ON
-- Setting Intrepid2_ENABLE_Sacado=ON since Trilinos_ENABLE_Intrepid2=ON AND 
Trilinos_ENABLE_Sacado=ON
-- Setting Intrepid2_ENABLE_KokkosKernels=ON since Trilinos_ENABLE_Intrepid2=ON 
AND Trilinos_ENABLE_KokkosKernels=ON
-- NOTE: Intrepid2_ENABLE_Sacado=ON is already set!
-- Setting NOX_ENABLE_Epetra=ON since Trilinos_ENABLE_NOX=ON AND 
Trilinos_ENABLE_Epetra=ON
-- Setting NOX_ENABLE_EpetraExt=ON since Trilinos_ENABLE_NOX=ON AND 
Trilinos_ENABLE_EpetraExt=ON
-- Setting NOX_ENABLE_ThyraCore=ON since Trilinos_ENABLE_NOX=ON AND 
Trilinos_ENABLE_ThyraCore=ON
-- Setting NOX_ENABLE_ThyraEpetraAdapters=ON since Trilinos_ENABLE_NOX=ON AND 
Trilinos_ENABLE_ThyraEpetraAdapters=ON
-- Setting NOX_ENABLE_ThyraEpetraExtAdapters=ON since Trilinos_ENABLE_NOX=ON 
AND Trilinos_ENABLE_ThyraEpetraExtAdapters=ON
-- Setting NOX_ENABLE_Amesos=ON since Trilinos_ENABLE_NOX=ON AND 
Trilinos_ENABLE_Amesos=ON
-- Setting NOX_ENABLE_AztecOO=ON since Trilinos_ENABLE_NOX=ON AND 
Trilinos_ENABLE_AztecOO=ON
-- Setting NOX_ENABLE_Ifpack=ON since Trilinos_ENABLE_NOX=ON AND 
Trilinos_ENABLE_Ifpack=ON
-- Setting NOX_ENABLE_ML=ON since Trilinos_ENABLE_NOX=ON AND 
Trilinos_ENABLE_ML=ON
-- Setting NOX_ENABLE_Belos=ON since Trilinos_ENABLE_NOX=ON AND 
Trilinos_ENABLE_Belos=ON
-- Setting NOX_ENABLE_Anasazi=ON since Trilinos_ENABLE_NOX=ON AND 
Trilinos_ENABLE_Anasazi=ON
-- Setting NOX_ENABLE_Stratimikos=ON since Trilinos_ENABLE_NOX=ON AND 
Trilinos_ENABLE_Stratimikos=ON
-- Setting NOX_ENABLE_Teko=ON since Trilinos_ENABLE_NOX=ON AND 
Trilinos_ENABLE_Teko=ON
-- NOTE: NOX_ENABLE_Stratimikos=ON is already set!
-- Setting NOX_ENABLE_Isorropia=ON since Trilinos_ENABLE_NOX=ON AND 
Trilinos_ENABLE_Isorropia=ON
-- Setting NOX_ENABLE_Tpetra=ON since Trilinos_ENABLE_NOX=ON AND 
Trilinos_ENABLE_Tpetra=ON
-- Setting NOX_ENABLE_ThyraTpetraAdapters=ON since Trilinos_ENABLE_NOX=ON AND 
Trilinos_ENABLE_ThyraTpetraAdapters=ON
-- NOT setting NOX_ENABLE_Ifpack2=ON since Ifpack2 is NOT enabled at this point!
-- Setting MueLu_ENABLE_Amesos=ON since Trilinos_ENABLE_MueLu=ON AND 
Trilinos_ENABLE_Amesos=ON
-- Setting MueLu_ENABLE_Amesos2=ON since Trilinos_ENABLE_MueLu=ON AND 
Trilinos_ENABLE_Amesos2=ON
-- Setting MueLu_ENABLE_Belos=ON since Trilinos_ENABLE_MueLu=ON AND 
Trilinos_ENABLE_Belos=ON
-- NOTE: MueLu_ENABLE_Epetra=OFF is already set so not enabling even though 
Trilinos_ENABLE_Epetra=ON is set!
-- Setting MueLu_ENABLE_EpetraExt=ON since Trilinos_ENABLE_MueLu=ON AND 
Trilinos_ENABLE_EpetraExt=ON
-- Setting MueLu_ENABLE_Teko=ON since Trilinos_ENABLE_MueLu=ON AND 
Trilinos_ENABLE_Teko=ON
-- Setting MueLu_ENABLE_Ifpack=ON since Trilinos_ENABLE_MueLu=ON AND 
Trilinos_ENABLE_Ifpack=ON
-- Setting MueLu_ENABLE_Intrepid2=ON since Trilinos_ENABLE_MueLu=ON AND 
Trilinos_ENABLE_Intrepid2=ON
-- Setting MueLu_ENABLE_ML=ON since Trilinos_ENABLE_MueLu=ON AND 
Trilinos_ENABLE_ML=ON
-- Setting MueLu_ENABLE_Tpetra=ON since Trilinos_ENABLE_MueLu=ON AND 
Trilinos_ENABLE_Tpetra=ON
-- Setting MueLu_ENABLE_Zoltan=ON since Trilinos_ENABLE_MueLu=ON AND 
Trilinos_ENABLE_Zoltan=ON
-- Setting MueLu_ENABLE_Zoltan2Core=ON since Trilinos_ENABLE_MueLu=ON AND 
Trilinos_ENABLE_Zoltan2Core=ON
-- Setting MueLu_ENABLE_Stratimikos=ON since Trilinos_ENABLE_MueLu=ON AND 
Trilinos_ENABLE_Stratimikos=ON
-- Setting MueLu_ENABLE_Thyra=ON since Trilinos_ENABLE_MueLu=ON AND 
Trilinos_ENABLE_Thyra=ON
-- Setting MueLu_ENABLE_ThyraTpetraAdapters=ON since Trilinos_ENABLE_MueLu=ON 
AND Trilinos_ENABLE_ThyraTpetraAdapters=ON
-- Setting MueLu_ENABLE_Isorropia=ON since Trilinos_ENABLE_MueLu=ON AND 
Trilinos_ENABLE_Isorropia=ON
-- Setting MueLu_ENABLE_AztecOO=ON since Trilinos_ENABLE_MueLu=ON AND 
Trilinos_ENABLE_AztecOO=ON
-- Setting MueLu_ENABLE_Pamgen=ON since Trilinos_ENABLE_MueLu=ON AND 
Trilinos_ENABLE_Pamgen=ON
-- Setting ROL_ENABLE_Belos=ON since Trilinos_ENABLE_ROL=ON AND 
Trilinos_ENABLE_Belos=ON
-- Setting ROL_ENABLE_Epetra=ON since Trilinos_ENABLE_ROL=ON AND 
Trilinos_ENABLE_Epetra=ON
-- Setting ROL_ENABLE_Tpetra=ON since Trilinos_ENABLE_ROL=ON AND 
Trilinos_ENABLE_Tpetra=ON
-- Setting ROL_ENABLE_Thyra=ON since Trilinos_ENABLE_ROL=ON AND 
Trilinos_ENABLE_Thyra=ON
-- Setting ROL_ENABLE_Sacado=ON since Trilinos_ENABLE_ROL=ON AND 
Trilinos_ENABLE_Sacado=ON
-- Setting ROL_ENABLE_Intrepid=ON since Trilinos_ENABLE_ROL=ON AND 
Trilinos_ENABLE_Intrepid=ON
-- Setting ROL_ENABLE_Shards=ON since Trilinos_ENABLE_ROL=ON AND 
Trilinos_ENABLE_Shards=ON
-- Setting ROL_ENABLE_Amesos=ON since Trilinos_ENABLE_ROL=ON AND 
Trilinos_ENABLE_Amesos=ON
-- Setting ROL_ENABLE_Amesos2=ON since Trilinos_ENABLE_ROL=ON AND 
Trilinos_ENABLE_Amesos2=ON
-- Setting ROL_ENABLE_MueLu=ON since Trilinos_ENABLE_ROL=ON AND 
Trilinos_ENABLE_MueLu=ON
-- Setting ROL_ENABLE_Tempus=ON since Trilinos_ENABLE_ROL=ON AND 
Trilinos_ENABLE_Tempus=ON
-- Setting ROL_ENABLE_Gtest=ON since Trilinos_ENABLE_ROL=ON AND 
Trilinos_ENABLE_Gtest=ON

Enabling all remaining required TPLs for current set of enabled packages ...

-- Setting TPL_ENABLE_BLAS=ON because it is required by the enabled package 
TeuchosNumerics
-- Setting TPL_ENABLE_LAPACK=ON because it is required by the enabled package 
TeuchosNumerics

Enabling all optional package TPL support <TRIBITS_PACKAGE>_ENABLE_<DEPTPL> not 
currently disabled for enabled TPLs ...

-- Setting KokkosCore_ENABLE_DLlib=ON since TPL_ENABLE_DLlib=ON
-- Setting TeuchosCore_ENABLE_MPI=ON since TPL_ENABLE_MPI=ON
-- Setting TeuchosKokkosComm_ENABLE_MPI=ON since TPL_ENABLE_MPI=ON
-- Setting KokkosKernels_ENABLE_BLAS=ON since TPL_ENABLE_BLAS=ON
-- Setting KokkosKernels_ENABLE_LAPACK=ON since TPL_ENABLE_LAPACK=ON
-- Setting Epetra_ENABLE_MPI=ON since TPL_ENABLE_MPI=ON
-- Setting Zoltan_ENABLE_MPI=ON since TPL_ENABLE_MPI=ON
-- Setting Zoltan_ENABLE_ParMETIS=ON since TPL_ENABLE_ParMETIS=ON
-- Setting TpetraCore_ENABLE_MPI=ON since TPL_ENABLE_MPI=ON
-- Setting Amesos_ENABLE_SuperLUDist=ON since TPL_ENABLE_SuperLUDist=ON
-- Setting Amesos_ENABLE_ParMETIS=ON since TPL_ENABLE_ParMETIS=ON
-- Setting Zoltan2Core_ENABLE_ParMETIS=ON since TPL_ENABLE_ParMETIS=ON
-- NOTE: Zoltan2Core_ENABLE_ParMETIS=ON is already set!
-- Setting ML_ENABLE_MPI=ON since TPL_ENABLE_MPI=ON
-- Setting ML_ENABLE_ParMETIS=ON since TPL_ENABLE_ParMETIS=ON
-- NOTE: ML_ENABLE_ParMETIS=ON is already set!
-- Setting ShyLU_NodeTacho_ENABLE_LAPACK=ON since TPL_ENABLE_LAPACK=ON
-- Setting ShyLU_NodeTacho_ENABLE_BLAS=ON since TPL_ENABLE_BLAS=ON
-- NOTE: ShyLU_NodeTacho_ENABLE_LAPACK=ON is already set!
-- NOTE: ShyLU_NodeTacho_ENABLE_BLAS=ON is already set!
-- Setting Amesos2_ENABLE_MPI=ON since TPL_ENABLE_MPI=ON
-- Setting Amesos2_ENABLE_SuperLUDist=ON since TPL_ENABLE_SuperLUDist=ON
-- Setting Amesos2_ENABLE_ParMETIS=ON since TPL_ENABLE_ParMETIS=ON
-- Setting SEACASExodus_ENABLE_MPI=ON since TPL_ENABLE_MPI=ON
-- NOTE: SEACASExodus_ENABLE_MPI=ON is already set!
-- Setting SEACASIoss_ENABLE_ParMETIS=ON since TPL_ENABLE_ParMETIS=ON
-- Setting SEACASIoss_ENABLE_DLlib=ON since TPL_ENABLE_DLlib=ON
-- Setting SEACAS_ENABLE_MPI=ON since TPL_ENABLE_MPI=ON
-- Setting NOX_ENABLE_LAPACK=ON since TPL_ENABLE_LAPACK=ON
-- Setting NOX_ENABLE_BLAS=ON since TPL_ENABLE_BLAS=ON
-- Setting Tempus_ENABLE_MPI=ON since TPL_ENABLE_MPI=ON

Enabling TPLs based on <TRIBITS_PACKAGE>_ENABLE_<TPL>=ON if TPL is not 
explicitly disabled ...


Set cache entries for optional packages/TPLs and tests/examples for packages 
actually enabled ...


Enabling the shell of non-enabled parent packages (mostly for show) that have 
at least one subpackage enabled ...

-- Setting Trilinos_ENABLE_ShyLU_Node=ON because 
Trilinos_ENABLE_ShyLU_NodeTacho=ON

Final set of enabled packages:  Gtest Kokkos Teuchos KokkosKernels RTOp Sacado 
Epetra Zoltan Shards Triutils EpetraExt Tpetra TrilinosSS Thyra Xpetra 
Isorropia AztecOO Galeri Amesos Pamgen Zoltan2Core Ifpack ML Belos ShyLU_Node 
Amesos2 SEACAS Anasazi Stratimikos Teko Intrepid Intrepid2 NOX MueLu Tempus ROL 
36

Final set of enabled SE packages:  Gtest KokkosCore KokkosContainers 
KokkosAlgorithms Kokkos TeuchosCore TeuchosParser TeuchosParameterList 
TeuchosComm TeuchosNumerics TeuchosRemainder TeuchosKokkosCompat 
TeuchosKokkosComm Teuchos KokkosKernels RTOp Sacado Epetra Zoltan Shards 
Triutils EpetraExt TpetraClassic TpetraTSQR TpetraCore Tpetra TrilinosSS 
ThyraCore ThyraEpetraAdapters ThyraEpetraExtAdapters ThyraTpetraAdapters Thyra 
Xpetra Isorropia AztecOO Galeri Amesos Pamgen Zoltan2Core Ifpack ML Belos 
ShyLU_NodeTacho ShyLU_Node Amesos2 SEACASExodus SEACASExodus_for 
SEACASExoIIv2for32 SEACASNemesis SEACASIoss SEACASChaco SEACASAprepro_lib 
SEACASSupes SEACASSuplib SEACASSuplibC SEACASSuplibCpp SEACASAlgebra 
SEACASAprepro SEACASConjoin SEACASEjoin SEACASEpu SEACASExodiff SEACASExomatlab 
SEACASExotxt SEACASExo_format SEACASEx1ex2v2 SEACASGjoin SEACASGen3D 
SEACASGenshell SEACASGrepos SEACASExplore SEACASMapvarlib SEACASMapvar 
SEACASMapvar-kd SEACASNas2exo SEACASZellij SEACASNemslice SEACASNemspread 
SEACASNumbers SEACASTxtexo SEACASEx2ex1v2 SEACAS Anasazi Stratimikos Teko 
Intrepid Intrepid2 NOX MueLu Tempus ROL 91

Final set of non-enabled packages:  TrilinosFrameworkTests 
TrilinosATDMConfigTests MiniTensor Domi Pliris Komplex Ifpack2 FEI TriKota 
Compadre STK Percept Phalanx Moertel Zoltan2Sphynx Zoltan2 ShyLU_DD ShyLU 
Rythmos Stokhos Piro Panzer PyTrilinos NewPackage Adelus TrilinosCouplings Pike 
TrilinosBuildStats 28

Final set of non-enabled SE packages:  TrilinosFrameworkTests 
TrilinosATDMConfigTests MiniTensor Domi Pliris ShyLU_NodeHTS ShyLU_NodeBasker 
ShyLU_NodeFastILU SEACASSVDI SEACASPLT SEACASBlot SEACASExo2mat SEACASExotec2 
SEACASFastq SEACASMat2exo SEACASSlice Komplex Ifpack2 FEI TriKota Compadre 
STKUtil STKEmend STKCoupling STKMath STKSimd STKNGP_TEST STKTopology STKMesh 
STKIO STKSearch STKTransfer STKTools STKBalance STKUnit_test_utils 
STKSearchUtil STKUnit_tests STKDoc_tests STKExprEval STK Percept Phalanx 
Moertel Zoltan2Sphynx Zoltan2 ShyLU_DDBDDC ShyLU_DDFROSch ShyLU_DDCore 
ShyLU_DDCommon ShyLU_DD ShyLU Rythmos Stokhos Piro PanzerCore PanzerDofMgr 
PanzerDiscFE PanzerAdaptersSTK PanzerMiniEM PanzerExprEval Panzer PyTrilinos 
NewPackage Adelus TrilinosCouplings PikeBlackBox PikeImplicit Pike 
TrilinosBuildStats 69

Final set of enabled TPLs:  MPI BLAS LAPACK ParMETIS Netcdf SuperLUDist DLlib 7

Final set of non-enabled TPLs:  MKL yaml-cpp Peano CUDA CUBLAS CUSOLVER 
CUSPARSE Thrust Cusp TBB Pthread HWLOC QTHREAD BinUtils ARPREC QD Boost Scotch 
OVIS gpcd METIS MTMETIS PuLP TopoManager LibTopoMap PaToH CppUnit ADOLC ADIC 
TVMET MF ExodusII Nemesis XDMF Zlib HDF5 CGNS Pnetcdf ADIOS2 y12m SuperLUMT 
SuperLU Cholmod UMFPACK MA28 AMD CSparse HYPRE PETSC BLACS SCALAPACK MUMPS 
STRUMPACK PARDISO_MKL PARDISO Oski TAUCS ForUQTK Dakota HIPS MATLAB CASK 
SPARSKIT QT gtest BoostLib BoostAlbLib OpenNURBS Portals CrayPortals Gemini 
InfiniBand BGPDCMF BGQPAMI Pablo HPCToolkit Clp GLPK qpOASES Matio PAPI 
MATLABLib Eigen X11 Lemon GLM quadmath CAMAL RTlib AmgX CGAL CGALCore VTune 
TASMANIAN ArrayFireCPU SimMesh SimModel SimParasolid SimAcis SimField Valgrind 
QUO ViennaCL Avatar mlpack pebbl MAGMASparse Check SARMA 109

Setting up export dependencies for all enabled SE packages ...


Probing the environment ...

-- USE_XSDK_DEFAULTS='FALSE'
-- BUILD_SHARED_LIBS='ON'
-- CMAKE_BUILD_TYPE='RELEASE'
-- MPI_USE_COMPILER_WRAPPERS='ON'
-- Leaving current CMAKE_C_COMPILER=mpicc since it is already set!
-- Leaving current CMAKE_CXX_COMPILER=mpicxx since it is already set!
-- Leaving current CMAKE_Fortran_COMPILER=mpif90 since it is already set!
-- MPI_EXEC='/usr/bin/mpiexec'
-- The C compiler identification is GNU 13.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/mpicc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- CMAKE_C_COMPILER_ID='GNU'
-- CMAKE_C_COMPILER_VERSION='13.2.0'
-- The CXX compiler identification is GNU 13.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/mpicxx - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- CMAKE_CXX_COMPILER_ID='GNU'
-- CMAKE_CXX_COMPILER_VERSION='13.2.0'
-- The Fortran compiler identification is GNU 13.2.0
-- Detecting Fortran compiler ABI info
-- Detecting Fortran compiler ABI info - done
-- Check for working Fortran compiler: /usr/bin/mpif90 - skipped
-- Skip adding flags for OpenMP because Kokkos flags does that ...
-- Trilinos_SET_INSTALL_RPATH='TRUE'
-- CMAKE_INSTALL_RPATH_USE_LINK_PATH='TRUE'
-- Setting default for CMAKE_INSTALL_RPATH pointing to Trilinos_INSTALL_LIB_DIR
-- 
CMAKE_INSTALL_RPATH='/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/trilinos-release-13-2-0/lib'
-- Looking for C++ include sys/time.h
-- Looking for C++ include sys/time.h - found
-- Looking for C++ include time.h
-- Looking for C++ include time.h - found
-- Looking for C++ include stdint.h
-- Looking for C++ include stdint.h - found
-- Looking for C++ include inttypes.h
-- Looking for C++ include inttypes.h - found
-- Found Perl: /usr/bin/perl (found version "5.38.2") 
-- Fortran name mangling: LOWER UNDER
-- Detecting Fortran/C Interface
-- Detecting Fortran/C Interface - Found GLOBAL and MODULE mangling
-- Verifying Fortran/CXX Compiler Compatibility
-- Verifying Fortran/CXX Compiler Compatibility - Success
-- Performing Test MATH_LIBRARY_IS_SUPPLIED
-- Performing Test MATH_LIBRARY_IS_SUPPLIED - Success
-- Performing Test FINITE_VALUE_HAVE_GLOBAL_ISNAN
-- Performing Test FINITE_VALUE_HAVE_GLOBAL_ISNAN - Failed
-- Performing Test FINITE_VALUE_HAVE_STD_ISNAN
-- Performing Test FINITE_VALUE_HAVE_STD_ISNAN - Success
-- Performing Test FINITE_VALUE_HAVE_GLOBAL_ISINF
-- Performing Test FINITE_VALUE_HAVE_GLOBAL_ISINF - Failed
-- Performing Test FINITE_VALUE_HAVE_STD_ISINF
-- Performing Test FINITE_VALUE_HAVE_STD_ISINF - Success
-- Found Doxygen: /usr/bin/doxygen (found version "1.9.8") found components: 
doxygen missing components: dot

Getting information for all enabled TPLs ...

Processing enabled TPL: MPI (enabled explicitly, disable with 
-DTPL_ENABLE_MPI=OFF)
Processing enabled TPL: BLAS (enabled by TeuchosNumerics, disable with 
-DTPL_ENABLE_BLAS=OFF)
-- BLAS_LIBRARY_NAMES='blas blas_win32'
-- Searching for libs in BLAS_LIBRARY_DIRS=''
-- Searching for a lib in the set "blas blas_win32":
--   Searching for lib 'blas' ...
--     Found lib '/usr/lib/x86_64-linux-gnu/libblas.so'
-- TPL_BLAS_LIBRARIES='/usr/lib/x86_64-linux-gnu/libblas.so'
Processing enabled TPL: LAPACK (enabled by TeuchosNumerics, disable with 
-DTPL_ENABLE_LAPACK=OFF)
-- LAPACK_LIBRARY_NAMES='lapack lapack_win32'
-- Searching for libs in LAPACK_LIBRARY_DIRS=''
-- Searching for a lib in the set "lapack lapack_win32":
--   Searching for lib 'lapack' ...
--     Found lib '/usr/lib/x86_64-linux-gnu/liblapack.so'
-- TPL_LAPACK_LIBRARIES='/usr/lib/x86_64-linux-gnu/liblapack.so'
Processing enabled TPL: ParMETIS (enabled explicitly, disable with 
-DTPL_ENABLE_ParMETIS=OFF)
-- ParMETIS_LIBRARY_NAMES='parmetis;metis'
-- 
TPL_ParMETIS_LIBRARIES='/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/parmetis-4.0.3/lib/libparmetis.so;/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/parmetis-4.0.3/lib/libmetis.so'
-- 
TPL_ParMETIS_INCLUDE_DIRS='/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/parmetis-4.0.3/include'
-- Performing Test HAVE_PARMETIS_VERSION_4_0_3
-- Performing Test HAVE_PARMETIS_VERSION_4_0_3 - Success
Processing enabled TPL: Netcdf (enabled explicitly, disable with 
-DTPL_ENABLE_Netcdf=OFF)
-- Netcdf_LIBRARY_NAMES='netcdf;pnetcdf;curl'
-- Searching for libs in 
Netcdf_LIBRARY_DIRS='/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/netcdf-4.7.4/lib'
-- Searching for a lib in the set "netcdf":
--   Searching for lib 'netcdf' ...
--     Found lib 
'/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/netcdf-4.7.4/lib/libnetcdf.so'
-- Searching for a lib in the set "pnetcdf":
--   Searching for lib 'pnetcdf' ...
-- NOTE: Did not find a lib in the lib set "pnetcdf" for the TPL 'Netcdf'!
-- 
TPL_Netcdf_LIBRARIES='/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/netcdf-4.7.4/lib/libnetcdf.so'
-- Searching for headers in 
Netcdf_INCLUDE_DIRS='/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/netcdf-4.7.4/include'
-- Searching for a header file in the set "netcdf.h":
--   Searching for header 'netcdf.h' ...
--     Found header 
'/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/netcdf-4.7.4/include/netcdf.h'
-- Found TPL 'Netcdf' include dirs 
'/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/netcdf-4.7.4/include'
-- 
TPL_Netcdf_INCLUDE_DIRS='/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/netcdf-4.7.4/include'
-- TPL_Netcdf_PARALLEL is True
Processing enabled TPL: SuperLUDist (enabled explicitly, disable with 
-DTPL_ENABLE_SuperLUDist=OFF)
-- SuperLUDist_LIBRARY_NAMES='superludist superlu_dist superlu_dist_2.0 
superlu_dist_2.5 superlu_dist_4.0'
-- 
TPL_SuperLUDist_LIBRARIES='/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/superlu_dist_5.1.2/lib/libsuperlu_dist.so'
-- Searching for headers in 
SuperLUDist_INCLUDE_DIRS='/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/superlu_dist_5.1.2/include'
-- Searching for a header file in the set "superlu_defs.h superludefs.h":
--   Searching for header 'superlu_defs.h' ...
--     Found header 
'/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/superlu_dist_5.1.2/include/superlu_defs.h'
-- Searching for a header file in the set "supermatrix.h":
--   Searching for header 'supermatrix.h' ...
--     Found header 
'/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/superlu_dist_5.1.2/include/supermatrix.h'
-- Found TPL 'SuperLUDist' include dirs 
'/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/superlu_dist_5.1.2/include'
-- 
TPL_SuperLUDist_INCLUDE_DIRS='/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/superlu_dist_5.1.2/include'
Processing enabled TPL: DLlib (enabled explicitly, disable with 
-DTPL_ENABLE_DLlib=OFF)
-- Attempting to tentatively enable TPL 'DLlib' ...
-- DLlib_LIBRARY_NAMES='dl'
-- Searching for libs in DLlib_LIBRARY_DIRS=''
-- Searching for a lib in the set "dl":
--   Searching for lib 'dl' ...
--     Found lib '/usr/lib/x86_64-linux-gnu/libdl.a'
-- TPL_DLlib_LIBRARIES='/usr/lib/x86_64-linux-gnu/libdl.a'
-- Attempt to tentatively enable TPL 'DLlib' passed!

Setting up testing support ...

-- CTEST_DROP_METHOD='http'
-- CTEST_DROP_SITE='testing.sandia.gov'
-- CTEST_PROJECT_NAME='Trilinos'
-- CTEST_DROP_LOCATION='/cdash/submit.php?project=Trilinos'
-- CTEST_TRIGGER_SITE=''
-- CTEST_DROP_SITE_CDASH='TRUE'
-- TRIBITS_2ND_CTEST_DROP_SITE='testing-dev.sandia.gov'
-- TRIBITS_2ND_CTEST_DROP_LOCATION='/cdash/submit.php?project=Trilinos'

Configuring individual enabled Trilinos packages ...

-- NOTE: Can't fill in version date files for Trilinos since 
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/.git/
 does not exist!
Processing enabled package: Gtest (Libs)
Processing enabled package: Kokkos (Core, Containers, Algorithms)
-- Setting default Kokkos CXX standard to 14
-- Setting policy CMP0074 to use <Package>_ROOT variables
-- CTEST_DROP_SITE='testing.sandia.gov'
-- CTEST_PROJECT_NAME='Trilinos'
-- CTEST_DROP_LOCATION='/cdash/submit.php?project=Trilinos'
-- CTEST_TRIGGER_SITE=''
-- CTEST_DROP_SITE_CDASH='TRUE'
-- TRIBITS_2ND_CTEST_DROP_SITE='testing-dev.sandia.gov'
-- TRIBITS_2ND_CTEST_DROP_LOCATION='/cdash/submit.php?project=Trilinos'
-- CTEST_DROP_SITE='testing.sandia.gov'
-- CTEST_PROJECT_NAME='Trilinos'
-- CTEST_DROP_LOCATION='/cdash/submit.php?project=Trilinos'
-- CTEST_TRIGGER_SITE=''
-- CTEST_DROP_SITE_CDASH='TRUE'
-- TRIBITS_2ND_CTEST_DROP_SITE='testing-dev.sandia.gov'
-- TRIBITS_2ND_CTEST_DROP_LOCATION='/cdash/submit.php?project=Trilinos'
-- The project name is: Trilinos
-- Using -std=c++14 for C++14 standard as feature
-- Built-in Execution Spaces:
--     Device Parallel: NoTypeDefined
--     Host Parallel: NoTypeDefined
--       Host Serial: SERIAL
-- 
-- Architectures:
-- Kokkos Devices: SERIAL, Kokkos Backends: SERIAL
Processing enabled package: Teuchos (Core, Parser, ParameterList, Comm, 
Numerics, Remainder, KokkosCompat, KokkosComm)
-- Performing Test HAVE_GCC_ABI_DEMANGLE
-- Performing Test HAVE_GCC_ABI_DEMANGLE - Success
-- Performing Test HAVE_TEUCHOS_BLASFLOAT
-- Performing Test HAVE_TEUCHOS_BLASFLOAT - Success
-- Performing Test LAPACK_SLAPY2_WORKS
-- Performing Test LAPACK_SLAPY2_WORKS - Success
-- Performing Test HAVE_TEUCHOS_LAPACKLARND
-- Performing Test HAVE_TEUCHOS_LAPACKLARND - Failed
-- Performing Test HAVE_CXX_ATTRIBUTE_CONSTRUCTOR
-- Performing Test HAVE_CXX_ATTRIBUTE_CONSTRUCTOR - Success
-- C++ compiler supports __attribute__((constructor)) syntax
-- Performing Test HAVE_CXX_ATTRIBUTE_WEAK
-- Performing Test HAVE_CXX_ATTRIBUTE_WEAK - Success
-- C++ compiler supports __attribute__((weak)) syntax and testing weak functions
-- Performing Test HAVE_CXX_PRAGMA_WEAK
-- Performing Test HAVE_CXX_PRAGMA_WEAK - Failed
-- C++ compiler does NOT support #pragma weak syntax and testing weak functions
-- Wrapping every Teuchos timer with a Kokkos profiling region.
Processing enabled package: KokkosKernels (Libs)
-- Setting policy CMP0074 to use <Package>_ROOT variables
-- CTEST_DROP_SITE='testing.sandia.gov'
-- CTEST_PROJECT_NAME='Trilinos'
-- CTEST_DROP_LOCATION='/cdash/submit.php?project=Trilinos'
-- CTEST_TRIGGER_SITE=''
-- CTEST_DROP_SITE_CDASH='TRUE'
-- TRIBITS_2ND_CTEST_DROP_SITE='testing-dev.sandia.gov'
-- TRIBITS_2ND_CTEST_DROP_LOCATION='/cdash/submit.php?project=Trilinos'
-- The project name is: Trilinos
-- CTEST_DROP_SITE='testing.sandia.gov'
-- CTEST_PROJECT_NAME='Trilinos'
-- CTEST_DROP_LOCATION='/cdash/submit.php?project=Trilinos'
-- CTEST_TRIGGER_SITE=''
-- CTEST_DROP_SITE_CDASH='TRUE'
-- TRIBITS_2ND_CTEST_DROP_SITE='testing-dev.sandia.gov'
-- TRIBITS_2ND_CTEST_DROP_LOCATION='/cdash/submit.php?project=Trilinos'
Overriding KOKKOSKERNELS_ENABLE_TPL_BLAS=OFF with TPL_ENABLE_BLAS=ON
Overriding KOKKOSKERNELS_ENABLE_TPL_LAPACK=OFF with TPL_ENABLE_LAPACK=ON
-- Performing Test KOKKOSKERNELS_TPL_BLAS_RETURN_COMPLEX
-- Performing Test KOKKOSKERNELS_TPL_BLAS_RETURN_COMPLEX - Success

=======================
KokkosKernels ETI Types
   Devices:  <Serial,HostSpace>
   Scalars:  double
   Ordinals: int
   Offsets:  int;size_t
   Layouts:  LayoutLeft

KokkosKernels TPLs
   BLAS:        
   LAPACK:      
=======================

-- Creating ETI files for Blas1_abs
-- Creating ETI files for Blas1_abs_mv
-- Creating ETI files for Blas1_scal
-- Creating ETI files for Blas1_scal_mv
-- Creating ETI files for Blas1_dot
-- Creating ETI files for Blas1_dot_mv
-- Creating ETI files for Blas_gesv
-- Creating ETI files for Blas1_axpby
-- Creating ETI files for Blas1_axpby_mv
-- Creating ETI files for Blas1_update
-- Creating ETI files for Blas1_update_mv
-- Creating ETI files for Blas1_sum
-- Creating ETI files for Blas1_sum_mv
-- Creating ETI files for Blas1_nrm1
-- Creating ETI files for Blas1_nrm1_mv
-- Creating ETI files for Blas1_nrm2w
-- Creating ETI files for Blas1_nrm2w_mv
-- Creating ETI files for Blas1_nrminf
-- Creating ETI files for Blas1_nrminf_mv
-- Creating ETI files for Blas1_iamax
-- Creating ETI files for Blas1_iamax_mv
-- Creating ETI files for Blas1_nrm2
-- Creating ETI files for Blas1_nrm2_mv
-- Creating ETI files for Blas1_mult
-- Creating ETI files for Blas1_mult_mv
-- Creating ETI files for Blas1_reciprocal
-- Creating ETI files for Blas1_reciprocal_mv
-- Creating ETI files for Blas2_gemv
-- Creating ETI files for Blas3_gemm
-- Creating ETI files for Blas3_trsm
-- Creating ETI files for Blas3_trmm
-- Creating ETI files for Blas_trtri
-- Creating ETI files for Sparse_sptrsv_solve
-- Creating ETI files for Sparse_spmv_struct
-- Creating ETI files for Sparse_spmv_mv_struct
-- Creating ETI files for Sparse_spmv
-- Creating ETI files for Sparse_spmv_mv
-- Creating ETI files for Sparse_spgemm_symbolic
-- Creating ETI files for Sparse_spgemm_numeric
-- Creating ETI files for Sparse_spgemm_jacobi
-- Creating ETI files for Sparse_spiluk_symbolic
-- Creating ETI files for Sparse_spiluk_numeric
-- Creating ETI files for Sparse_sptrsv_symbolic
-- Creating ETI files for Sparse_trsv
-- Creating ETI files for Sparse_gauss_seidel_symbolic
-- Creating ETI files for Sparse_gauss_seidel_numeric
-- Creating ETI files for Sparse_gauss_seidel_apply
Processing enabled package: RTOp (Libs)
Processing enabled package: Sacado (Libs)
-- Performing Test HAS_C99_TR1_CMATH
-- Performing Test HAS_C99_TR1_CMATH - Success
Processing enabled package: Epetra (Libs)
-- Looking for dggsvd3
-- Looking for dggsvd3 - not found
-- Looking for dggsvd3_
-- Looking for dggsvd3_ - found
-- Looking for DGGSVD3
-- Looking for DGGSVD3 - not found
-- Looking for DGGSVD3_
-- Looking for DGGSVD3_ - not found
Found new version of lapack. dggsvd3 is available.
Processing enabled package: Zoltan (Libs)
Processing enabled package: Shards (Libs)
Processing enabled package: Triutils (Libs)
Processing enabled package: EpetraExt (Libs)
Processing enabled package: Tpetra (Classic, TSQR, Core)
-- Tpetra: Enabling deprecated code
-- Determine whether Tpetra will assume that MPI is CUDA aware:
--   - Tpetra_ENABLE_CUDA is OFF, so Tpetra will assume that MPI is not CUDA 
aware.
-- Tpetra execution space availability (ON means available): 
--   - Serial:  ON
--   - Threads: OFF
--   - OpenMP:  OFF
--   - Cuda:    OFF
--   - HIP:     OFF
--   - SYCL:    OFF
-- Tpetra: Tpetra_INST_INT_LONG_LONG is enabled by default.
-- Tpetra: Tpetra_INST_INT_UNSIGNED is disabled by default.
-- Tpetra: Tpetra_INST_INT_UNSIGNED_LONG is disabled by default.
-- Tpetra: Tpetra_INST_INT_INT is disabled by default.
-- Tpetra: Tpetra_INST_INT_LONG is disabled by default.
-- 
-- Tpetra: Validate global ordinal setting ...
-- Tpetra: global ordinal setting is OK
-- 
-- Setting default Node to Kokkos::Compat::KokkosSerialWrapperNode.
Processing enabled package: TrilinosSS (Libs)
Processing enabled package: Thyra (Core, EpetraAdapters, EpetraExtAdapters, 
TpetraAdapters)
-- Thyra ModelEvaluator Hessian interfaces On
Processing enabled package: Xpetra (Libs)
-- Xpetra: Enabling deprecated code
-- Xpetra: Disabling ETI
Processing enabled package: Isorropia (Libs)
Processing enabled package: AztecOO (Libs)
Processing enabled package: Galeri (Libs)
Processing enabled package: Amesos (Libs)
Processing enabled package: Pamgen (Libs)
Processing enabled package: Zoltan2Core (Libs)
Processing enabled package: Ifpack (Libs)
Processing enabled package: ML (Libs)
Processing enabled package: Belos (Libs)
Processing enabled package: ShyLU_Node (Tacho)
Processing enabled package: Amesos2 (Libs)
Processing enabled package: SEACAS (Exodus, Exodus_for, ExoIIv2for32, Nemesis, 
Ioss, Chaco, Aprepro_lib, Supes, Suplib, SuplibC, SuplibCpp, Algebra, Aprepro, 
Conjoin, Ejoin, Epu, Exodiff, Exomatlab, Exotxt, Exo_format, Ex1ex2v2, Gjoin, 
Gen3D, Genshell, Grepos, Explore, Mapvarlib, Mapvar, Mapvar-kd, Nas2exo, 
Zellij, Nemslice, Nemspread, Numbers, Txtexo, Ex2ex1v2)
-- SEACASIoss_exodus32_to_exodus32: NOT added test because 
SEACASIoss_ENABLE_TESTS=', SEACAS_ENABLE_TESTS='''.
-- SEACASIoss_exodus_fpp_serialize: NOT added test because 
SEACASIoss_ENABLE_TESTS=', SEACAS_ENABLE_TESTS='''.
-- SEACASIoss_create_path_fpp: NOT added test because 
SEACASIoss_ENABLE_TESTS=', SEACAS_ENABLE_TESTS='''.
-- SEACASIoss_exodus32_to_exodus64: NOT added test because 
SEACASIoss_ENABLE_TESTS=', SEACAS_ENABLE_TESTS='''.
-- SEACASIoss_exodus32_to_exodus32_pnetcdf: NOT added test because 
SEACASIoss_ENABLE_TESTS=', SEACAS_ENABLE_TESTS='''.
-- SEACASIoss_pamgen_exodus_io_info: NOT added test because 
SEACASIoss_ENABLE_TESTS=', SEACAS_ENABLE_TESTS='''.
-- SEACASIoss_io_info_config_has_zoltan: NOT added test because 
SEACASIoss_ENABLE_TESTS=', SEACAS_ENABLE_TESTS='''.
-- SEACASIoss_io_info_config_has_parmetis: NOT added test because 
SEACASIoss_ENABLE_TESTS=', SEACAS_ENABLE_TESTS='''.
-- SEACASSupes_exttest: NOT added test because SEACASSupes_ENABLE_TESTS=', 
SEACAS_ENABLE_TESTS='''.
-- Looking for sys/resource.h
-- Looking for sys/resource.h - found
-- A Python-2 version of exodus.py and exomerge.py will be installed.
Processing enabled package: Anasazi (Libs)
Processing enabled package: Stratimikos (Libs)
Processing enabled package: Teko (Libs)
Processing enabled package: Intrepid (Libs)
Processing enabled package: Intrepid2 (Libs)
Processing enabled package: NOX (Libs)
-- Experimental code: OFF
-- LOCA: ON
-- Epetra Abstractions: ON
-- Thyra Abstractions: ON
-- Kokkos Solver Stack: OFF
-- PETSc Abstractions: OFF
Processing enabled package: MueLu (Libs)
-- MueLu: Enabling deprecated code
-- MueLu's tutorial requires for a correct build that if Tpetra is enabled, 
then GlobalOrdinal=int must be enabled, and either the Serial or OpenMP Nodes 
in Tpetra be enabled.  Since this is not the case, I am disabling MueLu's 
tutorial by default.  See Trilinos GitHub Issue #1726 for details: 
https://github.com/trilinos/Trilinos/issues/1726
-- You chose to enable MueLu's tutorial, even though I told you that it may not 
build correctly.  You are responsible for whatever build or link errors may 
occur as a result.
-- MueLu: Kokkos_Refactor ON by default
Processing enabled package: Tempus (Libs)
Processing enabled package: ROL (Libs)
-- ROL has been configured to use the build options:
--   ROL::Ptr           is implemented by Teuchos::RCP
--   ROL::ParameterList is implemented by Teuchos::ParameterList
--   ROL::stacktrace    is implemented by Teuchos::stacktrace
--   ROL::LinearAlgebra is implemented by Teuchos::SerialDense
--   ROL::LAPACK        is implemented by Teuchos::LAPACK
--   ROL::BLAS          is implemented by Teuchos::BLAS

Processing explicit instantiation support for enabled packages ...

Processing ETI support: TpetraCore
-- TpetraCore: Processing ETI / test support
-- Enabled Scalar types:        long long|double
-- Enabled LocalOrdinal types:  int
-- Enabled GlobalOrdinal types: long long
-- Enabled Node types:          Kokkos::Compat::KokkosSerialWrapperNode
-- Set of enabled types, before exclusions: S={int} LO={int} GO={long long} 
N={Kokkos::Compat::KokkosSerialWrapperNode};S={long long} 
N={Kokkos::Compat::KokkosSerialWrapperNode} LO={int} GO={long long};S={double} 
N={Kokkos::Compat::KokkosSerialWrapperNode} LO={int} GO={long long}

Set up for creating a distribution ...


Finished configuring Trilinos!

-- Configuring done (17.4s)
-- Generating done (1.2s)
-- Build files have been written to: 
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/build/trilinos-release-13-2-0
[  0%] Building CXX object 
commonTools/gtest/CMakeFiles/gtest.dir/gtest/gtest-all.cc.o
[  1%] Linking CXX shared library libgtest.so
[  1%] Built target gtest
[  1%] Building CXX object 
packages/kokkos/core/src/CMakeFiles/kokkoscore.dir/impl/Kokkos_CPUDiscovery.cpp.o
[  1%] Building CXX object 
packages/kokkos/core/src/CMakeFiles/kokkoscore.dir/impl/Kokkos_Core.cpp.o
[  1%] Building CXX object 
packages/kokkos/core/src/CMakeFiles/kokkoscore.dir/impl/Kokkos_Error.cpp.o
[  1%] Building CXX object 
packages/kokkos/core/src/CMakeFiles/kokkoscore.dir/impl/Kokkos_ExecPolicy.cpp.o
[  1%] Building CXX object 
packages/kokkos/core/src/CMakeFiles/kokkoscore.dir/impl/Kokkos_HostBarrier.cpp.o
[  1%] Building CXX object 
packages/kokkos/core/src/CMakeFiles/kokkoscore.dir/impl/Kokkos_HostSpace.cpp.o
[  1%] Building CXX object 
packages/kokkos/core/src/CMakeFiles/kokkoscore.dir/impl/Kokkos_HostSpace_deepcopy.cpp.o
[  1%] Building CXX object 
packages/kokkos/core/src/CMakeFiles/kokkoscore.dir/impl/Kokkos_HostThreadTeam.cpp.o
[  1%] Building CXX object 
packages/kokkos/core/src/CMakeFiles/kokkoscore.dir/impl/Kokkos_MemoryPool.cpp.o
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/kokkos/core/src/impl/Kokkos_MemoryPool.cpp:112:48:
 error: ‘uint32_t’ has not been declared
  112 | void _print_memory_pool_state(std::ostream& s, uint32_t const* 
sb_state_ptr,
      |                                                ^~~~~~~~
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/kokkos/core/src/impl/Kokkos_MemoryPool.cpp:113:49:
 error: ‘uint32_t’ has not been declared
  113 |                               int32_t sb_count, uint32_t sb_size_lg2,
      |                                                 ^~~~~~~~
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/kokkos/core/src/impl/Kokkos_MemoryPool.cpp:114:31:
 error: ‘uint32_t’ has not been declared
  114 |                               uint32_t sb_state_size, uint32_t 
state_shift,
      |                               ^~~~~~~~
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/kokkos/core/src/impl/Kokkos_MemoryPool.cpp:114:55:
 error: ‘uint32_t’ has not been declared
  114 |                               uint32_t sb_state_size, uint32_t 
state_shift,
      |                                                       ^~~~~~~~
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/kokkos/core/src/impl/Kokkos_MemoryPool.cpp:115:31:
 error: ‘uint32_t’ has not been declared
  115 |                               uint32_t state_used_mask) {
      |                               ^~~~~~~~
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/kokkos/core/src/impl/Kokkos_MemoryPool.cpp:
 In function ‘void Kokkos::Impl::_print_memory_pool_state(std::ostream&, const 
int*, int32_t, int, int, int, int)’:
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/kokkos/core/src/impl/Kokkos_MemoryPool.cpp:121:13:
 error: ‘uint32_t’ does not name a type
  121 |       const uint32_t block_count_lg2 = (*sb_state_ptr) >> state_shift;
      |             ^~~~~~~~
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/kokkos/core/src/impl/Kokkos_MemoryPool.cpp:49:1:
 note: ‘uint32_t’ is defined in header ‘<cstdint>’; did you forget to ‘#include 
<cstdint>’?
   48 | #include <sstream>
  +++ |+#include <cstdint>
   49 | 
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/kokkos/core/src/impl/Kokkos_MemoryPool.cpp:122:13:
 error: ‘uint32_t’ does not name a type
  122 |       const uint32_t block_size_lg2  = sb_size_lg2 - block_count_lg2;
      |             ^~~~~~~~
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/kokkos/core/src/impl/Kokkos_MemoryPool.cpp:122:13:
 note: ‘uint32_t’ is defined in header ‘<cstdint>’; did you forget to ‘#include 
<cstdint>’?
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/kokkos/core/src/impl/Kokkos_MemoryPool.cpp:123:13:
 error: ‘uint32_t’ does not name a type
  123 |       const uint32_t block_count     = 1u << block_count_lg2;
      |             ^~~~~~~~
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/kokkos/core/src/impl/Kokkos_MemoryPool.cpp:123:13:
 note: ‘uint32_t’ is defined in header ‘<cstdint>’; did you forget to ‘#include 
<cstdint>’?
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/kokkos/core/src/impl/Kokkos_MemoryPool.cpp:124:13:
 error: ‘uint32_t’ does not name a type
  124 |       const uint32_t block_used      = (*sb_state_ptr) & 
state_used_mask;
      |             ^~~~~~~~
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/kokkos/core/src/impl/Kokkos_MemoryPool.cpp:124:13:
 note: ‘uint32_t’ is defined in header ‘<cstdint>’; did you forget to ‘#include 
<cstdint>’?
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/kokkos/core/src/impl/Kokkos_MemoryPool.cpp:127:36:
 error: ‘block_size_lg2’ was not declared in this scope; did you mean 
‘sb_size_lg2’?
  127 |         << " block_size(" << (1 << block_size_lg2) << ")"
      |                                    ^~~~~~~~~~~~~~
      |                                    sb_size_lg2
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/kokkos/core/src/impl/Kokkos_MemoryPool.cpp:128:32:
 error: ‘block_used’ was not declared in this scope
  128 |         << " block_count( " << block_used << " / " << block_count << " 
)"
      |                                ^~~~~~~~~~
/home/narasimhan-swaminathan/Documents/Research/Software/Deal_II/candi/install/tmp/unpack/Trilinos-trilinos-release-13-2-0/packages/kokkos/core/src/impl/Kokkos_MemoryPool.cpp:128:55:
 error: ‘block_count’ was not declared in this scope
  128 |         << " block_count( " << block_used << " / " << block_count << " 
)"
      |                                                       ^~~~~~~~~~~
make[2]: *** 
[packages/kokkos/core/src/CMakeFiles/kokkoscore.dir/build.make:188: 
packages/kokkos/core/src/CMakeFiles/kokkoscore.dir/impl/Kokkos_MemoryPool.cpp.o]
 Error 1
make[1]: *** [CMakeFiles/Makefile2:5508: 
packages/kokkos/core/src/CMakeFiles/kokkoscore.dir/all] Error 2
make: *** [Makefile:166: all] Error 2
Failure with exit status: 2
Exit message: There was a problem building trilinos 13-2-0.

Reply via email to