On Mon, 2008-08-11 at 15:28 -0300, Andreas Tille wrote: > 2008/8/11 Holger Levsen <[EMAIL PROTECTED]>: > > please set your laptops resolution to 1024x768, otherwise your screen will > > be > > surrounded by a black border on the stream and the recordings.
I've got 1024x768 and initially the laptop didn't send a signal - a reboot was needed. :-( After the reboot with the cable attached, I'm able to disconnect and reconnect without problems. > I always like requests which say: Please do this and that but there is no hint > hwo to do so. I just prepared the following script which was tested on my > Laptop: > > #!/bin/sh > if [ "$1" = "off" ] ; then > xrandr --output LVDS --mode 1280x800 --auto > xrandr --output VGA --off > else > xrandr --output LVDS --mode 1024x768 --auto > xrandr --output VGA --mode 1024x768 --auto > fi Nothing I do with xrandr has any effect whatsoever on the actual image displayed which is cropped at the left and right edges by just enough to stop the paragraphs being readable. $ xrandr --verbose --output VGA --mode 1280x800 --auto screen 0: 320x200 84x52 mm 96.09dpi $ xrandr --verbose --output VGA --mode 1024x768 --auto screen 0: 320x200 84x52 mm 96.09dpi Using the overscan button on the remote also has no effect on the display. -- Neil Williams ============= http://www.data-freedom.org/ http://www.nosoftwarepatents.com/ http://www.linux.codehelp.co.uk/
signature.asc
Description: This is a digitally signed message part
_______________________________________________ Debconf-discuss mailing list [email protected] http://lists.debconf.org/mailman/listinfo/debconf-discuss
