> > Available equipment (based on > > http://cte.ulb.ac.be/images/docs/liste_auditoires2011.pdf) > > > > Janson: > > > > * wireless mic > > * PA > > Janson also has a mixer with XLR output, according to the NamurLUG > people (who have been doing this stuff for years, so I tend to believe > them :-)
make/model would be useful. Also the existing wiring would be useful. > > [...] > > Still needed: > > > > * 6 audience mics > > * 3 mixers, preferably 4. > > * 6 ambient mics (optional) > > > > Notes: > > > > * we can use the Xenyx 1202 if we don't need ambient mics. There is only 1 > > main volume control however, > > so the PA volume needs to be controlled externally. > > I believe some of the auditoria have a PA volume knob on the desk. Would > such a thing suffice? > Most likely yes, but see also 'requirements' :) In short, we need to know how the existing setup is wired so we can figure out how to connect our equipment. > > Actions: > > > > * check equipment in Ferrer and K auditorium > > * check wiring of mics and PA in all rooms. We have the following > > requirements: > > * it must be possible to send the mic output to an external mixer > > * it must be possible to provide the input signal for the PA from an > > external mixer > > * the mic output must not be wired directly to the PA (or at least it > > must be possible to mute > > that connection) > > I'll bring this up in tomorrow's meeting. > Great. Cheers, Peter. _______________________________________________ Debconf-video mailing list [email protected] http://lists.debconf.org/mailman/listinfo/debconf-video
