On Mon, Jun 19, 2017 at 08:20:18AM +0200, Kyle Robbertze wrote: > On 19/06/2017 03:30, Tim Ansell wrote: > > The Milkymist board adds Audio, MIDI and DMX capabilities. This will > > very useful for testing Kyle's work on USB Audio before the extracting > > audio from the HDMI stream is finished. It also lets you experiment with > > interfacing with control decks which have mechanical faders and tally > > lights. > Does the DMX capability provide a full universe of addressable space? > Personally I think the audio capture would be useful, but I am biased > there :)
Also: can it be made to work with with open source DMX control software, such as OLA[1] and QLC[2]? That might be interesting, too. [1] https://packages.debian.org/src:ola -- yes, I'm biased too :-) [2] https://sourceforge.net/projects/qlc/ -- not packaged yet AFAIK, volunteers welcome... [...] > > The TOFE Low Speed IO boards add useful buttons and indicator LEDs, > > another USB serial port and adding custom IO controls. This makes it > > significantly easier to debug issues with the board as you can get > > console output even when the USB is being reset. The buttons and LEDs > > also allow control at an event (like switching inputs/outputs) without > > needing to log into the capture PC. Might be used as tally lights, too... provided vocto supports that (no clue) [...] -- Could you people please use IRC like normal people?!? -- Amaya Rodrigo Sastre, trying to quiet down the buzz in the DebConf 2008 Hacklab _______________________________________________ Debconf-video mailing list [email protected] http://lists.debconf.org/mailman/listinfo/debconf-video
