On Sun, 2004-08-22 at 15:34, Christian T. Steigies wrote: > images ready for testing will be available here, amiga is done already: > http://people.debian.org/~cts/debian-m68k/kernel-image/
I'm affraid that's not an improvement for me: black screen, and still no IDE disks. So it's actually worse than before. Looks like the black screen is caused by this: # CONFIG_FRAMEBUFFER_CONSOLE is not set Ah, and no IDE disks is probably caused by this: # CONFIG_IDE_GENERIC is not set Below is the dmesg output. Kind regards, Kars. Searching for SAVEKMSG magic... Found 3706 bytes at 0x001dc010 >>>>>>>>>>>>>>>>>>>> Linux version 2.6.8-amiga ([EMAIL PROTECTED]) (gcc version 3.3.3 (Debian 20040321)) #1 Sun Aug 22 15:22:14 CEST 2004 Enabling workaround for errata I14 Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA LISA ALICE_PAL PCMCIA ZORRO Built 1 zonelists Kernel command line: ro root=/dev/sda2 init=/bin/bash debug=mem console=tty0 PID hash table entries: 16 (order 4: 128 bytes) Console: colour dummy device 80x25 Linux version 2.6.8-amiga ([EMAIL PROTECTED]) (gcc version 3.3.3 (Debian 20040321)) #1 Sun Aug 22 15:22:14 CEST 2004 Enabling workaround for errata I14 Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA LISA ALICE_PAL PCMCIA ZORRO Built 1 zonelists Kernel command line: ro root=/dev/sda1 init=/bin/bash debug=mem console=tty0 PID hash table entries: 16 (order 4: 128 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 45840k/48640k available (1632k kernel code, 1016k data, 108k init) Calibrating delay loop... 99.53 BogoMIPS Mount-cache hash table entries: 512 (order: 0, 4096 bytes) NET: Registered protocol family 16 SCSI subsystem initialized Zorro: Probing AutoConfig expansion devices: 1 device fb0: Amiga AGA frame buffer device, using 1280K of video memory audit: initializing netlink socket (disabled) audit(1090510461.650:0): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API Amiga-builtin serial driver version 4.30 ttyS00 is the amiga builtin serial port RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide0: Gayle IDE interface (A1200 style) SCSI ID 7 Clk 40MHz CCF=8 TOut 167 NCR53C9XF(espfast) esp0: FAST chip is Symbios Logic 53CF9x-2 (family=20, version=2) ESP: Total of 1 ESP hosts found, 1 actually in use. scsi0 : Blizzard1230 SCSI IV Using anticipatory io scheduler Vendor: QUANTUM Model: FIREBALL_TM2110S Rev: 300N Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST32550W Rev: 8108 Type: Direct-Access ANSI SCSI revision: 02 Vendor: RICOH Model: MP6200S Rev: 2.20 Type: CD-ROM ANSI SCSI revision: 02 esp0: target 0 [period 100ns offset 15 10.00MHz FAST SCSI-II] SCSI device sda: 4124736 512-byte hdwr sectors (2112 MB) SCSI device sda: drive cache: write through sda: RDSK sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 esp0: target 1 [period 100ns offset 15 10.00MHz FAST SCSI-II] SCSI device sdb: 4194058 512-byte hdwr sectors (2147 MB) SCSI device sdb: drive cache: write through sdb: RDSK sdb1 sdb2 Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 esp0: target 2 [period 100ns offset 15 10.00MHz FAST SCSI-II] sr0: scsi3-mmc drive: 6x/6x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 mice: PS/2 mouse device common for all mice input: Amiga keyboard input: Amiga mouse at joy0dat NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 amikbd: keyboard interrupt amikbd: Ctrl-Amiga-Amiga reset warning!! <<<<<<<<<<<<<<<<<<<<
