On Fri, Sep 15, 2006 at 09:16:17AM -0500, Stephen R Marenka wrote: > I'm trying kernel 2.6.17-8 on zeus, my Quadra 950. > > So I boot with Penguin root=/dev/sda8 mac53c9x=2,0 > and I get the following error (manually-typed in). > > | esp: using quick version > | esp: addr at 0x50f0f402 > | SCSI ID 7 Clk 25Mhz CCF=5 TOut 167 NCR53C9x(esp236) > | > | mac_esp: 2 esp controllers found > | scsi0 : ESP236 (NCR53C9x) > | Vendor: QUANTUM Model: FIREBALL ST4.3S Rev: 0F0C > | Type: Direct-Access ANSI SCSI revision: 02 > | Vendor: QUANTUM Model: ATLAS V 9 SCA Rev: 0201 > | Type: Direct-Access ANSI SCSI revision: 03 > | scsi1 : ESP236 (NCR53C9x) > | esp1: Aborting command > | esp1: dumping state > | esp1: SW [sreg<00> sstep<00> ireg<00>] > | esp1: HW reread [sreg<00> sstep<c0> ireg<20>] > | esp1: current command [tgt<00> lun<00> pphase<UNISSUED> cphase<SLCTNORM>] > | esp1: disconnected > | esp1: Aborting command > | esp1: dumping state > | esp1: SW [sreg<00> sstep<00> ireg<00>] > | esp1: HW reread [sreg<00> sstep<c0> ireg<40>] > | esp1: current command [tgt<00> lun<00> pphase<UNISSUED> cphase<UNISSUED>] > | esp1: disconnected > | esp1: Resetting scsi bus > > > Booting Penguin root=/dev/sda8 mac53c9x=1,0 booted successfully. I guess > that second scsi bus is a problem. :) > > Sonic didn't seem to load up, so I couldn't use the net. Perhaps it > wasn't compiled in? I'll have to check that later. > > Surprisingly the keyboard seemed to work, but with a different keymap. > Any ideas what I should try to straighten that out? > > No keyboard, no network, but progress. > > I see -9 is out, any reason it should be any different?
No, there where no changes in the m68k patches. But it would be good if somebody tested the kernel, as you know I havent't rebooted tanda yet. Christian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
