where did you get your installation media and what version is it Debian3.1 Sarge or Debian4.0Etch ?
If you are having trouble just to get started i would suggest sarge, you can always upgrade later. Etch is still pre-release/testing. although i have mac68k, i did have some trouble with a scsi disk of etch during testing last year, which took me a few reformat attempts. some disks are pickier than others, if it is an old one. hope this helps or if not some more Amiga people stepping in. On 3/4/07, Daniele Gratteri <[EMAIL PROTECTED]> wrote:
Daniele Gratteri ha scritto: > Yes, it was, at 80 MHz, however after that I also tried it at 50 MHz > with the very same problem :( > Well, I checked and it was at 100 MHz when I saved that log. The Apollo 4060 accelerator I have, used with the latest 68060 mask set and proper CPU cooling, lets me to use those high speeds but for some reason, the system is "randomly unstable" since it will freeze, sooner or later, but it may be after few seconds from boot or hours... It does when using SCSI intensively. No ideas about that SCSI problem which hangs Linux boot? As I said, it is not overclock related. -- ___ __ / __|___ Daniele Gratteri, Italian Commodore-Amiga user... /// | / |__/ Nickname: FIAT1100D - ICQ: 53943994 Ritmo S75 __ /// | \__|__\ Home page: http://www.gratteri.tk forever! \\\/// \___| E-MAIL: [EMAIL PROTECTED] ...since 1990 \/// -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
